Konfigurasjon av Samba - hugsar ikkje korleis eg gjorde det sist

[Gjest Slettet+9871234]

Hei.

 

Eg installerte Debian på tenaren min berre for å ha noko og gjere og eg får ikkje til med Samba. Eg tenkte eg skulle setje opp rtorrent litt forskjelleg denne gong ved å få han til å overvake /var/rtorrent/torrent og laste ned til /var/rtorrent/nedlasting sånn at eg kan ha fleire brukarar som nyttar same rtorrent-instans.

 

Anyways, eg får ikkje Samba til å samarbeide når eg skal dele mappene. Eg ser mappene i nettverk-vindauge, og når eg opnar ei av dei så spørjast det om passord. Eg gjev passordet eg gav brukaren min med smbpasswd -a torswin og eg klarar ikkje logge inn.

 

Har prøvd å restarte samba fleire gongar (/etc/init.d/samba restart). Eg mistenkjer at eg har gjort noko feil i konfigurasjonsfila. Kanskje nokon av dykk er litt smartare enn meg og kan hjelpe meg

 

 

 

#

# Sample configuration file for the Samba suite for Debian GNU/Linux.

#

#

# This is the main Samba configuration file. You should read the

# smb.conf(5) manual page in order to understand the options listed

# here. Samba has a huge number of configurable options most of which

# are not shown in this example

#

# Any line which starts with a ; (semi-colon) or a # (hash)

# is a comment and is ignored. In this example we will use a #

# for commentary and a ; for parts of the config file that you

# may wish to enable

#

# NOTE: Whenever you modify this file you should run the command

# "testparm" to check that you have not made any basic syntactic

# errors.

#

 

#======================= Global Settings =======================

 

[global]

 

## Browsing/Identification ###

 

# Change this to the workgroup/NT-domain name your Samba server will part of

workgroup = WORKGROUP

 

# server string is the equivalent of the NT Description field

server string = %h server

 

# Windows Internet Name Serving Support Section:

# WINS Support - Tells the NMBD component of Samba to enable its WINS Server

wins support = yes

 

# WINS Server - Tells the NMBD components of Samba to be a WINS Client

# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

; wins server = w.x.y.z

 

# If we receive WINS server info from DHCP, override the options above.

include = /etc/samba/dhcp.conf

 

# This will prevent nmbd to search for NetBIOS names through DNS.

dns proxy = no

 

# What naming service and in what order should we use to resolve host names

# to IP addresses

; name resolve order = lmhosts host wins bcast

 

#### Networking ####

 

# The specific set of interfaces / networks to bind to

# This can be either the interface name or an IP address/netmask;

# interface names are normally preferred

; interfaces = 127.0.0.0/8 eth0

 

# Only bind to the named interfaces and/or networks; you must use the

# 'interfaces' option above to use this.

# It is recommended that you enable this feature if your Samba machine is

# not protected by a firewall or is a firewall itself. However, this

# option cannot handle dynamic or non-broadcast interfaces correctly.

; bind interfaces only = true

 

 

 

#### Debugging/Accounting ####

 

# This tells Samba to use a separate log file for each machine

# that connects

log file = /var/log/samba/log.%m

 

# Put a capping on the size of the log files (in Kb).

max log size = 1000

 

# If you want Samba to only log through syslog then set the following

# parameter to 'yes'.

; syslog only = no

 

# We want Samba to log a minimum amount of information to syslog. Everything

# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log

# through syslog you should set the following parameter to something higher.

syslog = 0

 

# Do something sensible when Samba crashes: mail the admin a backtrace

panic action = /usr/share/samba/panic-action %d

 

 

####### Authentication #######

 

# "security = user" is always a good idea. This will require a Unix account

# in this server for every user accessing the server. See

# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html

# in the samba-doc package for details.

security = share

 

# You may wish to use password encryption. See the section on

# 'encrypt passwords' in the smb.conf(5) manpage before enabling.

encrypt passwords = true

 

# If you are using encrypted passwords, Samba will need to know what

# password database type you are using.

passdb backend = tdbsam

 

obey pam restrictions = yes

 

; guest account = nobody

invalid users = root

 

# This boolean parameter controls whether Samba attempts to sync the Unix

# password with the SMB password when the encrypted SMB password in the

# passdb is changed.

; unix password sync = no

 

# For Unix password sync to work on a Debian GNU/Linux system, the following

# parameters must be set (thanks to Ian Kahan <<[email protected]> for

# sending the correct chat script for the passwd program in Debian Sarge).

passwd program = /usr/bin/passwd %u

passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .

 

# This boolean controls whether PAM will be used for password changes

# when requested by an SMB client instead of the program listed in

# 'passwd program'. The default is 'no'.

; pam password change = no

 

########## Domains ###########

 

# Is this machine able to authenticate users. Both PDC and BDC

# must have this setting enabled. If you are the BDC you must

# change the 'domain master' setting to no

#

; domain logons = yes

#

# The following setting only takes effect if 'domain logons' is set

# It specifies the location of the user's profile directory

# from the client point of view)

# The following required a [profiles] share to be setup on the

# samba server (see below)

; logon path = \\%N\profiles\%U

# Another common choice is storing the profile in the user's home directory

; logon path = \\%N\%U\profile

 

# The following setting only takes effect if 'domain logons' is set

# It specifies the location of a user's home directory (from the client

# point of view)

; logon drive = H:

; logon home = \\%N\%U

 

# The following setting only takes effect if 'domain logons' is set

# It specifies the script to run during logon. The script must be stored

# in the [netlogon] share

# NOTE: Must be store in 'DOS' file format convention

; logon script = logon.cmd

 

# This allows Unix users to be created on the domain controller via the SAMR

# RPC pipe. The example command creates a user account with a disabled Unix

# password; please adapt to your needs

; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

 

########## Printing ##########

 

# If you want to automatically load your printer list rather

# than setting them up individually then you'll need this

; load printers = yes

 

# lpr(ng) printing. You may wish to override the location of the

# printcap file

; printing = bsd

; printcap name = /etc/printcap

 

# CUPS printing. See also the cupsaddsmb(8) manpage in the

# cupsys-client package.

; printing = cups

; printcap name = cups

 

# When using [print$], root is implicitly a 'printer admin', but you can

# also give this right to other users to add drivers and set printer

# properties

; printer admin = @ntadmin

 

 

############ Misc ############

 

# Using the following line enables you to customise your configuration

# on a per machine basis. The %m gets replaced with the netbios name

# of the machine that is connecting

; include = /home/samba/etc/smb.conf.%m

 

# Most people will find that this option gives better performance.

# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html

# for details

# You may want to add the following on a Linux system:

# SO_RCVBUF=8192 SO_SNDBUF=8192

socket options = TCP_NODELAY

 

# The following parameter is useful only if you have the linpopup package

# installed. The samba maintainer and the linpopup maintainer are

# working to ease installation and configuration of linpopup and samba.

; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

 

# Domain Master specifies Samba to be the Domain Master Browser. If this

# machine will be configured as a BDC (a secondary logon server), you

# must set this to 'no'; otherwise, the default behavior is recommended.

; domain master = auto

 

# Some defaults for winbind (make sure you're not using the ranges

# for something else.)

; idmap uid = 10000-20000

; idmap gid = 10000-20000

; template shell = /bin/bash

;

; The following was the default behaviour in sarge

; but samba upstream reverted the default because it might induce

; performance issues in large organizations

; See #368251 for some of the consequences of *not* having

; this setting and smb.conf(5) for all details

;

; winbind enum groups = yes

; winbind enum users = yes

 

#======================= Share Definitions =======================

 

;[Heimemappa]

; comment = Heimemappa

; browseable = yes

 

# By default, the home directories are exported read-only. Change next

# parameter to 'yes' if you want to be able to write to them.

; writable = yes

 

# File creation mask is set to 0700 for security reasons. If you want to

# create files with group=rw permissions, set next parameter to 0775.

; create mask = 0775

 

# Directory creation mask is set to 0700 for security reasons. If you want to

# create dirs. with group=rw permissions, set next parameter to 0775.

; directory mask = 0775

 

# Restrict access to home directories

# to the one of the authenticated user

# This might need tweaking when using external authentication schemes

; valid users = %S

 

# Un-comment the following and create the netlogon directory for Domain Logons

# (you need to configure Samba to act as a domain controller too.)

;[netlogon]

; comment = Network Logon Service

; path = /home/samba/netlogon

; guest ok = yes

; writable = no

; share modes = no

 

# Un-comment the following and create the profiles directory to store

# users profiles (see the "logon path" option above)

# (you need to configure Samba to act as a domain controller too.)

# The path below should be writable by all users so that their

# profile directory may be created the first time they log on

;[profiles]

; comment = Users profiles

; path = /home/samba/profiles

; guest ok = no

; browseable = no

; create mask = 0600

; directory mask = 0700

 

;[printers]

; comment = All Printers

; browseable = no

; path = /var/spool/samba

; printable = yes

; public = no

; writable = no

; create mode = 0700

 

# Windows clients look for this share name as a source of downloadable

# printer drivers

[print$]

; comment = Printer Drivers

; path = /var/lib/samba/printers

; browseable = yes

; read only = yes

; guest ok = no

# Uncomment to allow remote administration of Windows print drivers.

# Replace 'ntadmin' with the name of the group your admin users are

# members of.

; write list = root, @ntadmin

 

# A sample share for sharing your CD-ROM with others.

;[cdrom]

; comment = Samba server's CD-ROM

; writable = no

; locking = no

; path = /cdrom

; public = yes

 

# rtorrent-greier

[Nedlasta]

comment = Nedlasta

browseable = yes

read only = yes

path = /var/rtorrent/Downloads

; write list = torswin root

 

[Torrent]

comment = Torrentfiler

path = /var/rtorrent/torrent

browsable = yes

write able = yes

create mask = 0775

 

 

# The next two parameters show how to auto-mount a CD-ROM when the

# cdrom share is accesed. For this to work /etc/fstab must contain

# an entry like this:

#

# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0

#

# The CD-ROM gets unmounted automatically after the connection to the

#

# If you don't want to use auto-mounting/unmounting make sure the CD

# is mounted on /cdrom

#

; preexec = /bin/mount /cdrom

; postexec = /bin/umount /cdrom

 

 

 

[Admin'c]

sjekket logger og rettigheter?

 

ville lagd en session mappe, en download og en watch og en .rtorrent.rc i homemappa til brukeren du ønsker å starte rtorrent med MED DEN AKTUELLE BRUKEREN (pga rettigheter). Deretter ville jeg startet rtorrent med f.eks. screeen -S rtorrent rtorrent etter å ha konfigurert .rtorrent.rc

 

Deretter ville jeg lagd en bruker i samba for brukeren som skal bruke rtorrent (rettigheter igjen....) og delt hjemmemappen til den aktuelle brukeren (er kanskje default i default config nå om dagen?)

[Del]

Sett security til user, kryssjekk torswin er ordinær bruker på systemet med relevante rettigheter på delte mapper og filer.

[Gjest Slettet+9871234]

EG FEKK DET TIL Å FUNGERE! Eg satt i windows og prøvde \\Sleipner og heile tida vart eg sport om brukarnamn og passord og aldri var det rett.

 

I frustrasjon testa eg \\10.3 og gjett kva: Det funka! No fungerar systemet akkurat slik eg vil!

 

Windows som hadde skulda, ikkje Linux