GRUB å mannskjit! Hjelp til konfigurering

[Xecuter]

Driver og installere Arch, å fikk jo valg om å sette opp GRUB på nytt, skuffende at jeg ikke fikk valg om å konfigurere en allerede-eksisterende GRUB. Uansett, GRUB-en som jeg har sitter på /dev/sda1, mens Arch er installert på /dev/sdc2. Hvordan setter jeg opp GRUB da?

 

Fungerende GRUB:

 

# menu.lst - See: grub(8), info grub, update-grub(8)
#			grub-install(8), grub-floppy(8),
#			grub-md5-crypt, /usr/share/doc/grub
#			and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#	  password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##	  kopt_2_6_8=root=/dev/hdc1 ro
##	  kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=2fd4877f-321a-4f1c-a9ec-71abb4c03cbe ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##	  alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##	  lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##	  lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##	  altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##	  howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##	  memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 8.04, kernel 2.6.24-17-rt
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.24-17-rt root=UUID=2fd4877f-321a-4f1c-a9ec-71abb4c03cbe ro quiet splash
initrd		/boot/initrd.img-2.6.24-17-rt
quiet

title		Ubuntu 8.04, kernel 2.6.24-17-rt (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.24-17-rt root=UUID=2fd4877f-321a-4f1c-a9ec-71abb4c03cbe ro single
initrd		/boot/initrd.img-2.6.24-17-rt

title		Ubuntu 8.04, memtest86+
root		(hd0,0)
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

 

 

Archs GRUB:

 

# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst

# DEVICE NAME CONVERSIONS 
#
#  Linux		   Grub
# -------------------------
#  /dev/fd0		(fd0)
#  /dev/hda		(hd0)
#  /dev/hdb2	   (hd1,1)
#  /dev/hda3	   (hd0,2)
#

#  FRAMEBUFFER RESOLUTION SETTINGS
#	 +-------------------------------------------------+
#		  | 640x480	800x600	1024x768   1280x1024
#	  ----+--------------------------------------------
#	  256 | 0x301=769  0x303=771  0x305=773   0x307=775
#	  32K | 0x310=784  0x313=787  0x316=790   0x319=793
#	  64K | 0x311=785  0x314=788  0x317=791   0x31A=794
#	  16M | 0x312=786  0x315=789  0x318=792   0x31B=795
#	 +-------------------------------------------------+

# general configuration:
timeout   5
default   0
color light-blue/black light-cyan/blue

# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*

# (0) Arch Linux
title  Arch Linux  [/boot/vmlinuz26]
root   (hd0,0)
kernel /vmlinuz26 root=/dev/hda3 ro
initrd /kernel26.img

# (1) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1

 

[rocknrolf77]

Skulle da tro at det skulle bli

 

# (0) Arch Linux

title Arch Linux [/boot/vmlinuz26]

root (hd2,1)

kernel /vmlinuz26 root=/dev/hda3 ro

initrd /kernel26.img

 

Så kan du jo legge til

color light-blue/black light-cyan/blue

 

For some pretty colors

 

Legg bare dette til din eksisterende grub.

 

Bare ikke skyt meg hvis det ikke er riktig Du har ikke installert ny grub enda?