Noen som kan tyde en SMART logg for meg?

[FCW]

SMART forteller meg at min systemdisk har 80 "errors"

 

Loggen forteller meg ingenting, noen som kan hjelpe meg her?

 

Er det på tide å bytte? Disken funker bra selv om den er noen år gammel.

 

=== START OF READ SMART DATA SECTION ===

SMART Self-test log structure revision number 1

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

# 1 Extended offline Completed without error 00% 14004 -

# 2 Short offline Completed without error 00% 14003 -

 

> sudo smartctl --log selective /dev/sda

smartctl version 5.37 [i686-pc-linux-gnu] Copyright © 2002-6 Bruce Allen

Home page is http://smartmontools.sourceforge.net/

 

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

 

> sudo smartctl --log directory /dev/sda

smartctl version 5.37 [i686-pc-linux-gnu] Copyright © 2002-6 Bruce Allen

Home page is http://smartmontools.sourceforge.net/

 

Warning: device does not support General Purpose Logging

> sudo smartctl --all /dev/sda

smartctl version 5.37 [i686-pc-linux-gnu] Copyright © 2002-6 Bruce Allen

Home page is http://smartmontools.sourceforge.net/

 

=== START OF INFORMATION SECTION ===

Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family

Device Model: ST3160021A

Serial Number: 5JS09K97

Firmware Version: 3.06

User Capacity: 160.041.885.696 bytes

Device is: In smartctl database [for details use: -P show]

ATA Version is: 6

ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2

Local Time is: Tue Mar 4 00:27:10 2008 CET

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

 

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

 

General SMART Values:

Offline data collection status: (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: ( 430) seconds.

Offline data collection

capabilities: (0x5b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

No Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

No General Purpose Logging support.

Short self-test routine

recommended polling time: ( 1) minutes.

Extended self-test routine

recommended polling time: ( 111) minutes.

 

SMART Attributes Data Structure revision number: 10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 071 061 006 Pre-fail Always - 124340511

3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0

4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 366

5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0

7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail Always - 918166219

9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 14005

10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0

12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4147

194 Temperature_Celsius 0x0022 030 053 000 Old_age Always - 30

195 Hardware_ECC_Recovered 0x001a 071 061 000 Old_age Always - 124340511

197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0

198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0

199 UDMA_CRC_Error_Count 0x003e 200 181 000 Old_age Always - 23

200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0

202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0

 

SMART Error Log Version: 1

ATA Error Count: 80 (device log contains only the most recent five errors)

CR = Command Register [HEX]

FR = Features Register [HEX]

SC = Sector Count Register [HEX]

SN = Sector Number Register [HEX]

CL = Cylinder Low Register [HEX]

CH = Cylinder High Register [HEX]

DH = Device/Head Register [HEX]

DC = Device Command Register [HEX]

ER = Error register [HEX]

ST = Status register [HEX]

Powered_Up_Time is measured from power on, and printed as

DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,

SS=sec, and sss=millisec. It "wraps" after 49.710 days.

 

Error 80 occurred at disk power-on lifetime: 13921 hours (580 days + 1 hours)

When the command that caused the error occurred, the device was active or idle.

 

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

84 51 01 3f 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x0000003f = 63

 

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

c8 00 01 3f 00 00 e0 00 00:03:53.678 READ DMA

c8 00 01 3f 00 00 e0 00 00:03:53.080 READ DMA

c8 00 01 bf 00 00 e0 00 00:03:52.478 READ DMA

c8 00 01 4f 00 00 e0 00 00:03:51.876 READ DMA

c8 00 01 41 00 00 e0 00 00:03:51.321 READ DMA

 

Error 79 occurred at disk power-on lifetime: 13921 hours (580 days + 1 hours)

When the command that caused the error occurred, the device was active or idle.

 

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

84 51 01 3f 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x0000003f = 63

 

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

c8 00 01 3f 00 00 e0 00 00:03:53.678 READ DMA

c8 00 01 bf 00 00 e0 00 00:03:53.080 READ DMA

c8 00 01 4f 00 00 e0 00 00:03:52.478 READ DMA

c8 00 01 41 00 00 e0 00 00:03:51.876 READ DMA

c8 00 01 41 00 00 e0 00 00:03:51.321 READ DMA

 

Error 78 occurred at disk power-on lifetime: 13921 hours (580 days + 1 hours)

When the command that caused the error occurred, the device was active or idle.

 

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

84 51 01 41 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000041 = 65

 

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

c8 00 01 41 00 00 e0 00 00:03:53.678 READ DMA

c8 00 01 41 00 00 e0 00 00:03:53.080 READ DMA

c8 00 01 41 00 00 e0 00 00:03:52.478 READ DMA

c8 00 01 3f 00 00 e0 00 00:03:51.876 READ DMA

c8 00 01 3f 00 00 e0 00 00:03:51.321 READ DMA

 

Error 77 occurred at disk power-on lifetime: 13921 hours (580 days + 1 hours)

When the command that caused the error occurred, the device was active or idle.

 

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

84 51 01 41 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000041 = 65

 

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

c8 00 01 41 00 00 e0 00 00:03:53.678 READ DMA

c8 00 01 41 00 00 e0 00 00:03:53.080 READ DMA

c8 00 01 3f 00 00 e0 00 00:03:52.478 READ DMA

c8 00 01 3f 00 00 e0 00 00:03:51.876 READ DMA

c8 00 01 3f 00 00 e0 00 00:03:51.321 READ DMA

 

Error 76 occurred at disk power-on lifetime: 13921 hours (580 days + 1 hours)

When the command that caused the error occurred, the device was active or idle.

 

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

84 51 01 41 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000041 = 65

 

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

c8 00 01 41 00 00 e0 00 00:03:47.699 READ DMA

c8 00 01 3f 00 00 e0 00 00:03:53.080 READ DMA

c8 00 01 3f 00 00 e0 00 00:03:52.478 READ DMA

c8 00 01 3f 00 00 e0 00 00:03:51.876 READ DMA

c8 00 01 7f 00 00 e0 00 00:03:51.321 READ DMA

 

SMART Self-test log structure revision number 1

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

# 1 Extended offline Completed without error 00% 14004 -

# 2 Short offline Completed without error 00% 14003 -

 

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

 

 

På forhånd takk!

Endret 3. mars 2008 av FCW

[Mr. Floppy]

Siden feilmeldingene nevner ICRC (=Interface CRC), så vil jeg i første omgang foreslå at du sjekker kablene. Dobbelsjekk at de sitter fast i begge ender, prøv gjerne med en annen kabel, og pass på at den ikke ligger i nærheten av noe som kan forstyrre signalene.

 

Loggen inneholder ingen graverende feil av typen ødelagte sektorer e.l. Det mest alvorlige er SMART-attributt #1, Raw Read Error Rate, som indikerer at disken må jobbe litt ekstra for å lese platen. Men det er vel ikke annet å vente når disken har kjørt i over 14000 timer - verdien ligger foreløpig godt innenfor den verdien som produsenten oppgir som kritisk.

 

Står det noe i /var/log/messages som tyder på noen problemer?

[FCW]

Takk for svar

 

Her er utdreg av loggen:

Mar  9 06:47:02 FILSERVER syslogd 1.4.1#21ubuntu3: restart.
Mar  9 07:03:57 FILSERVER -- MARK --
Mar  9 07:23:57 FILSERVER -- MARK --
Mar  9 07:43:57 FILSERVER -- MARK --
Mar  9 08:03:57 FILSERVER -- MARK --
Mar  9 08:23:57 FILSERVER -- MARK --
Mar  9 08:43:57 FILSERVER -- MARK --
Mar  9 08:45:43 FILSERVER kernel: [472753.544228] sd 4:0:0:0: [sdc] Device not ready: <6>: Sense Key : Not Ready [current] 
Mar  9 08:45:43 FILSERVER kernel: [472753.544236] : Add. Sense: Logical unit not ready, initializing command required
Mar  9 08:45:43 FILSERVER kernel: [472753.544243] end_request: I/O error, dev sdc, sector 311
Mar  9 08:45:43 FILSERVER kernel: [472753.544248] printk: 20 messages suppressed.
Mar  9 09:03:57 FILSERVER -- MARK --
Mar  9 09:23:57 FILSERVER -- MARK --
Mar  9 09:26:47 FILSERVER kernel: [475215.385708] sd 4:0:0:0: [sdc] Device not ready: <6>: Sense Key : Not Ready [current] 
Mar  9 09:26:47 FILSERVER kernel: [475215.385716] : Add. Sense: Logical unit not ready, initializing command required
Mar  9 09:26:47 FILSERVER kernel: [475215.385723] end_request: I/O error, dev sdc, sector 540278863
Mar  9 09:43:57 FILSERVER -- MARK --
Mar  9 10:03:57 FILSERVER -- MARK --
Mar  9 10:23:57 FILSERVER -- MARK --
Mar  9 10:43:57 FILSERVER -- MARK --
Mar  9 11:03:57 FILSERVER -- MARK --
Mar  9 11:23:57 FILSERVER -- MARK --
Mar  9 11:43:57 FILSERVER -- MARK --
Mar  9 12:03:57 FILSERVER -- MARK --
Mar  9 12:23:57 FILSERVER -- MARK --
Mar  9 12:43:57 FILSERVER -- MARK --
Mar  9 13:03:57 FILSERVER -- MARK --
Mar  9 13:23:57 FILSERVER -- MARK --
Mar  9 13:43:57 FILSERVER -- MARK --
Mar  9 14:03:57 FILSERVER -- MARK --
Mar  9 14:23:57 FILSERVER -- MARK --
Mar  9 14:43:57 FILSERVER -- MARK --
Mar  9 15:03:57 FILSERVER -- MARK --
Mar  9 15:23:57 FILSERVER -- MARK --
Mar  9 15:43:57 FILSERVER -- MARK --
Mar  9 16:03:57 FILSERVER -- MARK --
Mar  9 16:23:57 FILSERVER -- MARK --
Mar  9 16:31:04 FILSERVER kernel: [500650.911775] sd 4:0:0:0: [sdc] Device not ready: <6>: Sense Key : Not Ready [current] 
Mar  9 16:31:04 FILSERVER kernel: [500650.911785] : Add. Sense: Logical unit not ready, initializing command required
Mar  9 16:31:04 FILSERVER kernel: [500650.911793] end_request: I/O error, dev sdc, sector 311
Mar  9 16:31:04 FILSERVER kernel: [500650.911797] printk: 20 messages suppressed.
Mar  9 16:31:14 FILSERVER kernel: [500660.767643] ip_tables: (C) 2000-2006 Netfilter Core Team
Mar  9 16:43:57 FILSERVER -- MARK --
Mar  9 16:51:29 FILSERVER kernel: [501874.777200] sd 4:0:0:0: [sdc] Device not ready: <6>: Sense Key : Not Ready [current] 
Mar  9 16:51:29 FILSERVER kernel: [501874.777210] : Add. Sense: Logical unit not ready, initializing command required
Mar  9 16:51:29 FILSERVER kernel: [501874.777219] end_request: I/O error, dev sdc, sector 0
Mar  9 16:51:29 FILSERVER kernel: [501874.777223] printk: 20 messages suppressed.
Mar  9 17:03:57 FILSERVER -- MARK --

 

 

Forslag???

 

Edit: Fant ut at loggen viser Backup disken (Maxtor USB), sannsynligvis p.g.a den går i "standby"

FC

Endret 9. mars 2008 av FCW

[Mr. Floppy]

Edit: Fant ut at loggen viser Backup disken (Maxtor USB), sannsynligvis p.g.a den går i "standby"

FC

Selv bruker jeg ikke standby-funksjon, så jeg er ikke sikker på hva slags utslag det gir i loggen, men det er ikke usannsynlig at meldingene i loggen dreier seg om det. Du kan jo sjekke SMART-verdiene til den disken også for å være sikker.

 

Hvis det ikke nevnes noe om den første disken i loggfilen, så vil jeg tippe at du ikke har noen akutte problemer, men sjekk kablene om du ikke har gjort det.

 

Les forøvrig av SMART-verdiene en gang i blant (eller sett på automatisk e-postvarsling), ta jevnlig backup av viktige filer og sov godt i natt også.