Artic Silver

[TheCh0sen]

hei. jeg hadde på artic silver på min amd athlon men jeg fikk det utfor kjerna og skulle ta det av med qtips dynka i aceton, det ble ikke bra, griseriet er nå utover hele prosessoren. Hvordan i huleste får jeg det av?

[Xell]

Quote:

TheCh0sen skrev (2002-01-08 20:49): hei. jeg hadde på artic silver på min amd athlon men jeg fikk det utfor kjerna og skulle ta det av med qtips dynka i aceton, det ble ikke bra, griseriet er nå utover hele prosessoren. Hvordan i huleste får jeg det av?

 

Å fjerne Artic Silver fra keramiken kan være vanskelig, emn her kommer instruksjonene for hvordan du skal gjøre det (hentet fra ArticSilver hjemmesiden):

 

 

Removal Instructions (From Hardware)

1. Arctic Silver II can easily be removed from hardware using the proper cleaners and tools. For general clean-up, a cloth or paper towel will work well. Intricate cleaning can be accomplished with Q-tip swabs. An old toothbrush can often get the compound out of crevices that other tools cannot reach.

The recommended cleaners are:

 

CPU Core:

 

Use isopropyl alcohol or acetone (nail polish remover) and a bit of careful rubbing.

(If you use acetone, do a final cleaning with isopropyl alcohol.)

 

 

Heatsink:

 

Use xylene based products (Goof Off, some carburetor cleaners and many brake cleaners.) or mineral spirits.

 

Remember:

Once you have applied a thermal grease or melted a thermal pad onto a heatsink, it is impossible to remove all of the grease or pad from the microscopic valleys in the heatsink using standard cleaning chemicals and paper or fabric towels. Any subsequent thermal material will be applied over the remnants of the original material.

 

Never use any oil or petroleum based cleaners (WD-40, citrus based grease removers and many automotive degreasers) on the base of a heatsink. The oil, which is engineered to not evaporate, will fill in the microscopic valleys in the metal and significantly reduce the effectiveness of any subsequently applied thermal compound.

 

 

CPU Ceramic:

 

Use any of the following cleaners.

 

Any dish detergent (Dawn, Lux, Palmolive, Etc.)

Do not use soap for an automatic dishwasher to clean a CPU.

 

WD-40, citrus based grease removers (Goo Gone, Etc.)

 

Xylene based products (Goof Off, some carburetor cleaners and many brake cleaners)

 

Mineral spirits. (Be careful to keep the mineral spirits away from the core.)

 

 

Once the majority of the compound has been removed from the ceramic, small patches remaining on the ceramic can be 'erased' with a soft eraser.

 

 

 

 

2. If you use any of the suggested products to remove Arctic Silver II from the CPU ceramic or heatsink base, always do a final cleaning with isopropyl alcohol to remove any residue from the cleaner.

 

 

 

 

Som du ser er den beste måten å fjene det fra keramiken oppvasksåpe (Zalo el. Sun e.l.), men pass på å rense godt med aceton el. isopropanol etter på.

[TheCh0sen]

takker og bukker, stikker nå opp og prøver det.

[Jørgen Sørheim]

urk, ja. fyttigrisen for noe svineri det derre er når det kommer utenfor kjernen.

[Shroomer]

Er AS2 mer vanskelig å få av en AS1?

Jeg har AS1 og det går fett av med litt isopropanol.

[khosethl]

Nanotherm går enkelt av med dasspapir

[rolfhansen]

Quote:

On 2002-01-09 22:21, khosethl skrev: Nanotherm går enkelt av med dasspapir

 

I tillegg kjøler det like bra.. Jeg bytter ikke tilbake til Arctic Silver..