problem med Xorg.conf

[eppis]

jeg har en del problemer med Xorg.conf jeg får ikke til. Skjermkortet er et ATI Xpress 200. Det er en laptop det er snakk om. jeg har loda agpgart i rc.conf da en kompis sa at dette kansje var grunnen.

 

hwd -x (lage xorg.conf)

 

Her har dere Xorg.conf min rett etter autoconfig

Klikk for å se/fjerne innholdet nedenfor

Section "ServerLayout"

Identifier "Xorg Configured"

Screen 0 "Screen0" 0 0

InputDevice "Keyboard0" "CoreKeyboard"

InputDevice "PS/2 Mouse" "CorePointer"

# Serial Mouse not detected

# USB Mouse not detected

EndSection

 

Section "ServerFlags"

Option "AllowMouseOpenFail" "true"

 

EndSection

 

Section "Files"

RgbPath "/usr/share/X11/rgb"

ModulePath "/usr/lib/xorg/modules"

FontPath "/usr/share/fonts/misc:unscaled"

FontPath "/usr/share/fonts/misc"

FontPath "/usr/share/fonts/75dpi:unscaled"

FontPath "/usr/share/fonts/75dpi"

FontPath "/usr/share/fonts/100dpi:unscaled"

FontPath "/usr/share/fonts/100dpi"

FontPath "/usr/share/fonts/PEX"

# Additional fonts: Locale, Gimp, TTF...

FontPath "/usr/share/fonts/cyrillic"

# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"

# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"

# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!

FontPath "/usr/share/fonts/Type1"

FontPath "/usr/share/fonts/ttf/western"

FontPath "/usr/share/fonts/ttf/decoratives"

FontPath "/usr/share/fonts/truetype"

FontPath "/usr/share/fonts/truetype/openoffice"

FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"

FontPath "/usr/share/fonts/latex-ttf-fonts"

FontPath "/usr/share/fonts/defoma/CID"

FontPath "/usr/share/fonts/defoma/TrueType"

EndSection

 

Section "Module"

Load "ddc" # ddc probing of monitor

Load "dbe"

Load "dri"

Load "extmod"

Load "glx"

Load "bitmap" # bitmap-fonts

Load "type1"

Load "freetype"

Load "record"

EndSection

 

Section "InputDevice"

Identifier "Keyboard0"

Driver "keyboard"

Option "CoreKeyboard"

Option "XkbRules" "xorg"

Option "XkbModel" "pc105"

Option "XkbLayout" ""

Option "XkbVariant" ""

EndSection

 

Section "InputDevice"

Identifier "Serial Mouse"

Driver "mouse"

Option "Protocol" "Microsoft"

Option "Device" "/dev/ttyS0"

Option "Emulate3Buttons" "true"

Option "Emulate3Timeout" "70"

Option "SendCoreEvents" "true"

EndSection

 

Section "InputDevice"

Identifier "PS/2 Mouse"

Driver "mouse"

Option "Protocol" "auto"

Option "ZAxisMapping" "4 5"

Option "Device" "/dev/psaux"

Option "Emulate3Buttons" "true"

Option "Emulate3Timeout" "70"

Option "SendCoreEvents" "true"

EndSection

 

Section "InputDevice"

Identifier "USB Mouse"

Driver "mouse"

Option "Device" "/dev/input/mice"

Option "SendCoreEvents" "true"

Option "Protocol" "IMPS/2"

Option "ZAxisMapping" "4 5"

Option "Buttons" "5"

EndSection

 

# Auto-generated by Archie mkxcfg

 

Section "Monitor"

Identifier "Monitor0"

Option "DPMS" "true"

# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors

HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors

VertRefresh 50.0 - 75.0 # Very conservative. May flicker.

# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.

# Default modes distilled from

# "VESA and Industry Standards and Guide for Computer Display Monitor

# Timing", version 1.0, revision 0.8, adopted September 17, 1998.

# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $

# 640x350 @ 85Hz (VESA) hsync: 37.9kHz

ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync

# 640x400 @ 85Hz (VESA) hsync: 37.9kHz

ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync

# 720x400 @ 85Hz (VESA) hsync: 37.9kHz

ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync

# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz

ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync

# 640x480 @ 72Hz (VESA) hsync: 37.9kHz

ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync

# 640x480 @ 75Hz (VESA) hsync: 37.5kHz

ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync

# 640x480 @ 85Hz (VESA) hsync: 43.3kHz

ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync

# 800x600 @ 56Hz (VESA) hsync: 35.2kHz

ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync

# 800x600 @ 60Hz (VESA) hsync: 37.9kHz

ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync

# 800x600 @ 72Hz (VESA) hsync: 48.1kHz

ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync

# 800x600 @ 75Hz (VESA) hsync: 46.9kHz

ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync

# 800x600 @ 85Hz (VESA) hsync: 53.7kHz

ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync

# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz

ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace

# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz

ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync

# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz

ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync

# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz

ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync

# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz

ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync

# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz

ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync

# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz

ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync

# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz

ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync

# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz

ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync

# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz

ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync

# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz

ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync

# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz

ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync

# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz

ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync

# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz

ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync

# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz

ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync

# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz

ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync

# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz

ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync

# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz

ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync

# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz

ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync

# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz

ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync

# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz

ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync

# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz

ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync

# Additional modelines

ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

# Extended modelines with GTF timings

# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz

ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync

# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz

ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync

# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz

ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync

# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz

ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync

# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz

ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync

# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz

ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync

# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz

ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync

# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz

ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync

# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz

ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync

# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz

ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync

# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz

ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync

# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz

ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync

# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz

ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync

# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz

ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync

# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz

ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync

# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz

ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync

# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz

ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync

# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz

ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync

# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz

ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync

# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz

ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync

# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz

ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync

EndSection

 

# Auto-generated by Archie mkxcfg

 

Section "Device"

Identifier "Card0"

Driver "vesa"

VendorName "All"

BoardName "All"

EndSection

 

Section "Screen"

Identifier "Screen0"

Device "Card0"

Monitor "Monitor0"

DefaultColorDepth 16

SubSection "Display"

Depth 1

Modes "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 4

Modes "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 8

Modes "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 15

Modes "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 16

Modes "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 24

Modes "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 32

Modes "1024x768" "800x600" "640x480"

EndSubSection

EndSection

 

Section "DRI"

Mode 0666

EndSection

 

jeg har tatt og endret fra "vesa" driver og satt in "fglrx" sånn at det ser slikt ut:

 

Section "Device"
       Identifier  "Card0"
       Driver      "fglrx"
       VendorName  "All"
       BoardName   "All"
EndSection

 

selv om jeg har prøvd dette om og om igjen hjelper det lite. når jeg skriver glxinfo får jeg følgende resultat:

 

[root@myhost ~]$ glxinfo
name of display: :0.0
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
display: :0  screen: 0
direct rendering: No

 

Jeg legger med deler av Xorg.log

 

Klikk for å se/fjerne innholdet nedenfor

(II) LoadModule: "fglrx"

(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so

(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."

(II) fglrx(0): pEnt->device->identifier=0x81e2848

(II) fglrx(0): === [atiddxPreInit] === begin, [x]

(II) fglrx(0): PCI bus 1 card 5 func 0

(**) fglrx(0): Depth 24, (--) framebuffer bpp 32

(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)

(==) fglrx(0): Default visual is TrueColor

(**) fglrx(0): Option "DPMS" "true"

(==) fglrx(0): RGB weight 888

(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)

(==) fglrx(0): Gamma Correction for I is 0x06419064

(==) fglrx(0): Gamma Correction for II is 0x06419064

(==) fglrx(0): Buffer Tiling is ON

(II) fglrx(0): Primary V_BIOS segment is: 0xc000

(--) fglrx(0): Chipset: "ATI Radeon Xpress Series" (Chipset = 0x5a62)

(--) fglrx(0): (PciSubVendor = 0x1014, PciSubDevice = 0x059d)

(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI

(--) fglrx(0): Linear framebuffer (phys) at 0xc8000000

(--) fglrx(0): MMIO registers at 0xb0100000

(==) fglrx(0): ROM-BIOS at 0x000c0000

(II) fglrx(0): VESA BIOS detected

(II) fglrx(0): VESA VBE Version 2.0

(II) fglrx(0): VESA VBE Total Mem: 65536 kB

(II) fglrx(0): VESA VBE OEM: ATI RADEON XPRESS 200M Series

(II) fglrx(0): VESA VBE OEM Software Rev: 1.0

(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.

(II) fglrx(0): VESA VBE OEM Product: DC4

(II) fglrx(0): VESA VBE OEM Product Rev: 01.00

[drm] failed to load kernel module "fglrx"

(WW) fglrx(0): Failed to open DRM connection

(--) fglrx(0): VideoRAM: 65536 kByte, Type: DDR SGRAM / SDRAM

(II) fglrx(0): PCIE card detected

(WW) fglrx(0): board is an unknown third party board, chipset is supported

(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]

(II) fglrx(0): Display1: No EDID information from DDC.

(II) fglrx(0): Derived EDID from BIOS and internal tables for Display1:

(II) fglrx(0): Display1 EDID data ---------------------------

(II) fglrx(0): Manufacturer: MS_ Model: 3 Serial#: 0

(II) fglrx(0): Year: 1990 Week: 0

(II) fglrx(0): EDID Version: 1.3

(II) fglrx(0): Digital Display Input

(II) fglrx(0): Max H-Image Size [cm]: horiz.: 40 vert.: 30

(II) fglrx(0): Gamma: 1.00

(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; Non RGB Multicolor Display

(II) fglrx(0): First detailed timing is preferred mode

(II) fglrx(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000

(II) fglrx(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000

(II) fglrx(0): Supported VESA Video Modes:

(II) fglrx(0): 640x480@60Hz

(II) fglrx(0): 800x600@60Hz

(II) fglrx(0): 1024x768@60Hz

(II) fglrx(0): Manufacturer's mask: 0

(II) fglrx(0): Supported Future Video Modes:

(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433

(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 60 vid: 16453

(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481

(II) fglrx(0): Supported additional Video Mode:

(II) fglrx(0): clock: 65.0 MHz Image Size: 0 x 0 mm

(II) fglrx(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0

(II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 806 v_border: 0

(II) fglrx(0): EDID (in hex):

(II) fglrx(0): 00ffffffffffff00367f030000000000

(II) fglrx(0): 0000010380281e00f200000000000000

(II) fglrx(0): 00000021080031404540614000000000

(II) fglrx(0): 00000000000064190040410026301888

(II) fglrx(0): 26000000000000000000000000000000

(II) fglrx(0): 00000000000000000000000000000000

(II) fglrx(0): 00000000000000000000000000000000

(II) fglrx(0): 000000000000000000000000000000b8

(II) fglrx(0): End of Display1 EDID data --------------------

(II) fglrx(0): Primary Controller - LCD on internal LVDS

(II) fglrx(0): Internal Desktop Setting: 0x00000008

(II) fglrx(0): POWERplay version 3. 4 power states available:

(II) fglrx(0): 1. 301/205MHz @ 60Hz [enable load balancing]

(II) fglrx(0): 2. 100/133MHz @ 60Hz []

(II) fglrx(0): 3. 100/205MHz @ 60Hz [thermal diode mode]

(II) fglrx(0): 4. 200/166MHz @ 60Hz [low voltage]

(==) fglrx(0): Qbs disabled

(==) fglrx(0): FAST_SWAP disabled

(==) fglrx(0): PseudoColor visuals disabled

(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)

(==) fglrx(0): Center Mode is disabled

(==) fglrx(0): TMDS coherent mode is enabled

(II) fglrx(0): Total of 12 modes found for primary display.

(--) fglrx(0): Virtual size is 1024x768 (pitch 0)

(**) fglrx(0): *Mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 770 776 806

(**) fglrx(0): *Mode "848x480": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "848x480" 65.00 848 960 1096 1344 480 626 632 806

(**) fglrx(0): *Mode "800x600": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "800x600" 65.00 800 936 1072 1344 600 686 692 806

(**) fglrx(0): *Mode "720x576": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "720x576" 65.00 720 896 1032 1344 576 674 680 806

(**) fglrx(0): *Mode "720x480": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "720x480" 65.00 720 896 1032 1344 480 626 632 806

(**) fglrx(0): *Mode "640x480": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "640x480" 65.00 640 856 992 1344 480 626 632 806

(**) fglrx(0): Default mode "640x400": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "640x400" 65.00 640 848 992 1344 400 586 592 806

(**) fglrx(0): Default mode "640x350": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "640x350" 65.00 640 848 984 1344 350 561 567 806

(**) fglrx(0): Default mode "512x384": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "512x384" 65.00 512 784 920 1344 384 578 584 806

(**) fglrx(0): Default mode "400x300": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (D)

(II) fglrx(0): Modeline "400x300" 65.00 400 728 864 1344 300 686 692 806 doublescan

(**) fglrx(0): Default mode "320x240": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (D)

(II) fglrx(0): Modeline "320x240" 65.00 320 688 824 1344 240 626 632 806 doublescan

(**) fglrx(0): Default mode "320x200": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (D)

(II) fglrx(0): Modeline "320x200" 65.00 320 688 824 1344 200 586 592 806 doublescan

(--) fglrx(0): Display dimensions: (400, 300) mm

(--) fglrx(0): DPI set to (65, 65)

(--) fglrx(0): Virtual size is 1024x768 (pitch 1024)

(**) fglrx(0): *Mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 770 776 806

(**) fglrx(0): *Mode "848x480": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "848x480" 65.00 848 960 1096 1344 480 626 632 806

(**) fglrx(0): *Mode "800x600": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "800x600" 65.00 800 936 1072 1344 600 686 692 806

(**) fglrx(0): *Mode "720x576": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "720x576" 65.00 720 896 1032 1344 576 674 680 806

(**) fglrx(0): *Mode "720x480": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "720x480" 65.00 720 896 1032 1344 480 626 632 806

(**) fglrx(0): *Mode "640x480": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "640x480" 65.00 640 856 992 1344 480 626 632 806

(**) fglrx(0): Default mode "640x400": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "640x400" 65.00 640 848 992 1344 400 586 592 806

(**) fglrx(0): Default mode "640x350": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "640x350" 65.00 640 848 984 1344 350 561 567 806

(**) fglrx(0): Default mode "512x384": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz

(II) fglrx(0): Modeline "512x384" 65.00 512 784 920 1344 384 578 584 806

(**) fglrx(0): Default mode "400x300": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (D)

(II) fglrx(0): Modeline "400x300" 65.00 400 728 864 1344 300 686 692 806 doublescan

(**) fglrx(0): Default mode "320x240": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (D)

(II) fglrx(0): Modeline "320x240" 65.00 320 688 824 1344 240 626 632 806 doublescan

(**) fglrx(0): Default mode "320x200": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (D)

(II) fglrx(0): Modeline "320x200" 65.00 320 688 824 1344 200 586 592 806 doublescan

(==) fglrx(0): NoAccel = NO

(==) fglrx(0): HPV inactive

(==) fglrx(0): FSAA enabled: NO

(==) fglrx(0): FSAA Gamma enabled

(==) fglrx(0): FSAA Multisample Position is fix

(==) fglrx(0): NoDRI = NO

(II) Loading sub module "fglrxdrm"

(II) LoadModule: "fglrxdrm"

(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so

(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."

(II) fglrx(0): Depth moves disabled by default

(==) fglrx(0): Capabilities: 0x00000000

(==) fglrx(0): CapabilitiesEx: 0x00000000

(==) fglrx(0): cpuFlags: 0x8000001d

(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"

(**) fglrx(0): ATI GART size: 128 MB

(WW) fglrx(0): No DRM connection for driver fglrx.

(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536

(==) fglrx(0): UseFastTLS=0

(==) fglrx(0): BlockSignalsOnLock=1

(==) fglrx(0): EnablePrivateBackZ = NO

(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0

(II) fglrx(0): detected X.org 7.1.0.0

(EE) fglrx(0): GART is not initialized, disabling DRI

(WW) fglrx(0): ***********************************************

(WW) fglrx(0): * DRI initialization failed! *

(WW) fglrx(0): * (maybe driver kernel module missing or bad) *

(WW) fglrx(0): * 2D acceleraton available (MMIO) *

(WW) fglrx(0): * no 3D acceleration available *

(WW) fglrx(0): ********************************************* *

(II) fglrx(0): FBADPhys: 0x1c000000 FBMappedSize: 0x04000000

(==) fglrx(0): Write-combining range (0xc8000000,0x4000000)

(II) fglrx(0): FBMM initialized for area (0,0)-(1024,8191)

(II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)

(II) fglrx(0): Largest offscreen area available: 1024 x 7423

(==) fglrx(0): Backing store disabled

(==) fglrx(0): Silken mouse enabled

(**) fglrx(0): DPMS enabled

(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)

(II) fglrx(0): Acceleration enabled

(WW) fglrx(0): Option "VendorName" is not used

(WW) fglrx(0): Option "ModelName" is not used

(II) fglrx(0): Direct rendering disabled

(==) fglrx(0): Using hardware cursor

 

jeg har lagt med så mye info jeg kan... håper noen vet hva som er feil... jeg tror det kansje er en modul eller et eller annent som mangler men jeg er helt grønn når det gjelder Xorg.conf..

Endret 28. mars 2007 av eppis

[BarteBaluba]

Anbefaler deg heller å kjøre 'xorgconfig' i stedet for 'hwd -x'.

 

Etter det, kjører du 'aticonfig --initial', så redigerer du /etc/X11/xorg.conf:

 

Da legger du til dette nederst:

 

Section "DRI"
     Mode         0660
EndSection

Section "ServerFlags"
      Option  "AIGLX" "off"
EndSection

Section "Extensions"
      Option "Composite" "Disable"
EndSection

 

Og sørg for at 'Load "dri"' ligger i Section "Modules", så legger du fglrx i "MODULES" i /etc/rc.conf.

[eppis]

det gjorde ingen forsjell som du du sa. tror virkelig ikke det har så mye og si om du bruker hwd eller xorgconfig dem ambefaler jo hwd i wikien til Archlinux. Jeg prøvde din metode uansett og jeg får fortsatt samma output fra glxinfo:

 

[root@myhost ~]$ glxinfo
name of display: :0.0
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
display: :0  screen: 0
direct rendering: No

 

skal prøve og endre et par ting i Kjernen senere i dag. kansje det ordner seg da. Da jeg tror det kan være feilen.

Endret 29. mars 2007 av eppis

[BarteBaluba]

Har erfaringen her at hwd ikk alltid konfiguerer xorg helt rett.

 

Hvis meg din xorg.conf nå.

Endret 29. mars 2007 av roberth1990

[eppis]

Har erfaringen her at hwd ikk alltid konfiguerer xorg helt rett.

hvis du sier det så

 

uansett får feil at den ikke finne fglrx modula når jeg booter opp eller prøvder og modprobe den. brukte pacman til og instalere.

 

her er xorgen

Klikk for å se/fjerne innholdet nedenfor

# File generated by xorgconfig.

#

# Copyright 2004 The X.Org Foundation

#

# Permission is hereby granted, free of charge, to any person obtaining a

# copy of this software and associated documentation files (the "Software"),

# to deal in the Software without restriction, including without limitation

# the rights to use, copy, modify, merge, publish, distribute, sublicense,

# and/or sell copies of the Software, and to permit persons to whom the

# Software is furnished to do so, subject to the following conditions:

#

# The above copyright notice and this permission notice shall be included in

# all copies or substantial portions of the Software.

#

# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL

# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF

# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

# SOFTWARE.

#

# Except as contained in this notice, the name of The X.Org Foundation shall

# not be used in advertising or otherwise to promote the sale, use or other

# dealings in this Software without prior written authorization from

# The X.Org Foundation.

#

# **********************************************************************

# Refer to the xorg.conf(5) man page for details about the format of

# this file.

# **********************************************************************

# **********************************************************************

# Module section -- this section is used to specify

# which dynamically loadable modules to load.

# **********************************************************************

#

# **********************************************************************

# Files section. This allows default font and rgb paths to be set

# **********************************************************************

# **********************************************************************

# Server flags section.

# **********************************************************************

# **********************************************************************

# Input devices

# **********************************************************************

# **********************************************************************

# Core keyboard's InputDevice section

# **********************************************************************

# **********************************************************************

# Core Pointer's InputDevice section

# **********************************************************************

# **********************************************************************

# Other input device sections

# this is optional and is required only if you

# are using extended input devices. This is for example only. Refer

# to the xorg.conf man page for a description of the options.

# **********************************************************************

#

# Section "InputDevice"

# Identifier "Mouse2"

# Driver "mouse"

# Option "Protocol" "MouseMan"

# Option "Device" "/dev/mouse2"

# EndSection

#

# Section "InputDevice"

# Identifier "spaceball"

# Driver "magellan"

# Option "Device" "/dev/cua0"

# EndSection

#

# Section "InputDevice"

# Identifier "spaceball2"

# Driver "spaceorb"

# Option "Device" "/dev/cua0"

# EndSection

#

# Section "InputDevice"

# Identifier "touchscreen0"

# Driver "microtouch"

# Option "Device" "/dev/ttyS0"

# Option "MinX" "1412"

# Option "MaxX" "15184"

# Option "MinY" "15372"

# Option "MaxY" "1230"

# Option "ScreenNumber" "0"

# Option "ReportingMode" "Scaled"

# Option "ButtonNumber" "1"

# Option "SendCoreEvents"

# EndSection

#

# Section "InputDevice"

# Identifier "touchscreen1"

# Driver "elo2300"

# Option "Device" "/dev/ttyS0"

# Option "MinX" "231"

# Option "MaxX" "3868"

# Option "MinY" "3858"

# Option "MaxY" "272"

# Option "ScreenNumber" "0"

# Option "ReportingMode" "Scaled"

# Option "ButtonThreshold" "17"

# Option "ButtonNumber" "1"

# Option "SendCoreEvents"

# EndSection

# **********************************************************************

# Monitor section

# **********************************************************************

# Any number of monitor sections may be present

# **********************************************************************

# Graphics device section

# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

# Device configured by xorgconfig:

# **********************************************************************

# Screen sections

# **********************************************************************

# Any number of screen sections may be present. Each describes

# the configuration of a single screen. A single specific screen section

# may be specified from the X server command line with the "-screen"

# option.

# **********************************************************************

# ServerLayout sections.

# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes

# the way multiple screens are organised. A specific ServerLayout

# section may be specified from the X server command line with the

# "-layout" option. In the absence of this, the first section is used.

# When now ServerLayout section is present, the first Screen section

# is used alone.

# Section "DRI"

# Mode 0666

# EndSection

 

Section "ServerLayout"

 

# The Identifier line must be present

# Each Screen line specifies a Screen section name, and optionally

# the relative position of other screens. The four names after

# primary screen name are the screens to the top, bottom, left and right

# of the primary screen. In this example, screen 2 is located to the

# right of screen 1.

# Each InputDevice line specifies an InputDevice section name and

# optionally some options to specify the way the device is to be

# used. Those options include "CorePointer", "CoreKeyboard" and

# "SendCoreEvents".

Identifier "Simple Layout"

Screen 0 "aticonfig-Screen[0]" 0 0

InputDevice "Mouse1" "CorePointer"

InputDevice "Keyboard1" "CoreKeyboard"

EndSection

 

Section "Files"

 

# The location of the RGB database. Note, this is the name of the

# file minus the extension (like ".txt" or ".db"). There is normally

# no need to change the default.

# RgbPath "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),

# as well as specifying multiple comma-separated entries in one FontPath

# command (or a combination of both methods)

#

#

# FontPath "/usr/lib/X11/fonts/local/"

# FontPath "/usr/lib/X11/fonts/misc/"

# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"

# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"

# FontPath "/usr/lib/X11/fonts/Speedo/"

# FontPath "/usr/lib/X11/fonts/Type1/"

# FontPath "/usr/lib/X11/fonts/TrueType/"

# FontPath "/usr/lib/X11/fonts/freefont/"

# FontPath "/usr/lib/X11/fonts/75dpi/"

# FontPath "/usr/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/lib/modules"

FontPath "/usr/share/fonts/misc"

FontPath "/usr/share/fonts/100dpi:unscaled"

FontPath "/usr/share/fonts/75dpi:unscaled"

FontPath "/usr/share/fonts/TTF"

FontPath "/usr/share/fonts/Type1"

EndSection

 

Section "Module"

 

# This loads the DBE extension module.

# This loads the miscellaneous extensions module, and disables

# initialisation of the XFree86-DGA extension within that module.

# This loads the font modules

# Load "type1"

# This loads the GLX module

# Load "glx"

# This loads the DRI module

# Load "dri"

Load "dbe" # Double buffer extension

SubSection "extmod"

Option "omit xfree86-dga" # don't initialise the DGA extension

EndSubSection

Load "freetype"

# Load "xtt"

EndSection

 

Section "InputDevice"

 

# For most OSs the protocol can be omitted (it defaults to "Standard").

# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),

# uncomment the following line.

# Option "Protocol" "Xqueue"

# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"

# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the

# lines below (which are the defaults). For example, for a non-U.S.

# keyboard, you will probably want to use:

# Option "XkbModel" "pc105"

# If you have a US Microsoft Natural keyboard, you can use:

# Option "XkbModel" "microsoft"

#

# Then to change the language, change the Layout setting.

# For example, a german layout can be obtained with:

# Option "XkbLayout" "de"

# or:

# Option "XkbLayout" "de"

# Option "XkbVariant" "nodeadkeys"

#

# If you'd like to switch the positions of your capslock and

# control keys, use:

# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for Xorg

# Option "XkbRules" "xorg"

# Option "XkbModel" "pc105"

# Option "XkbLayout" "us"

# Option "XkbVariant" ""

# Option "XkbOptions" ""

# Option "XkbDisable"

Identifier "Keyboard1"

Driver "kbd"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))

Option "XkbRules" "xorg"

Option "XkbModel" "pc104"

Option "XkbLayout" "no"

EndSection

 

Section "InputDevice"

 

# Identifier and driver

# the following line.

# Option "Protocol" "Xqueue"

# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# Baudrate and SampleRate are only for some Logitech mice. In

# almost every case these lines should be omitted.

# Option "BaudRate" "9600"

# Option "SampleRate" "150"

# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,

# horizontal wheel to buttons 6 & 7. Change if your mouse has more than

# 3 buttons and you need to map the wheel to different button ids to avoid

# conflicts.

# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

Identifier "Mouse1"

Driver "mouse"

Option "Protocol" "Auto" # Auto detect

Option "Device" "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment

Option "ZAxisMapping" "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice

Option "Emulate3Buttons"

# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection

 

Section "Monitor"

 

# HorizSync is in kHz unless units are specified.

# HorizSync may be a comma separated list of discrete values, or a

# comma separated list of ranges of values.

# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S

# USER MANUAL FOR THE CORRECT NUMBERS.

# HorizSync 30-64 # multisync

# HorizSync 31.5, 35.2 # multiple fixed sync frequencies

# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.

# VertRefresh may be a comma separated list of discrete values, or a

# comma separated list of ranges of values.

# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S

# USER MANUAL FOR THE CORRECT NUMBERS.

Identifier "My Monitor"

HorizSync 31.5 - 48.5

VertRefresh 50.0 - 100.0

EndSection

 

Section "Monitor"

Identifier "aticonfig-Monitor[0]"

Option "VendorName" "ATI Proprietary Driver"

Option "ModelName" "Generic Autodetecting Monitor"

Option "DPMS" "true"

EndSection

 

Section "Device"

 

# The chipset line is optional in most cases. It can be used to override

# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver

# modules, this line instructs the server to load the specified driver

# module. Even when not using loadable driver modules, this line

# indicates which driver should interpret the information in this section.

# The BusID line is used to specify which of possibly multiple devices

# this section is intended for. When this line isn't present, a device

# section can only match up with the primary video device. For PCI

# devices a line like the following could be used. This line should not

# normally be included unless there is more than one video device

# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

Identifier "Standard VGA"

Driver "vga"

VendorName "Unknown"

BoardName "Unknown"

EndSection

 

Section "Device"

 

# unsupported card

#VideoRam 65536

# Insert Clocks lines here if appropriate

Identifier "My Video Card"

Driver "vga"

EndSection

 

Section "Device"

Identifier "aticonfig-Device[0]"

Driver "fglrx"

EndSection

 

Section "Screen"

Identifier "Screen 1"

Device "My Video Card"

Monitor "My Monitor"

DefaultDepth 24

SubSection "Display"

Viewport 0 0

Depth 8

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Viewport 0 0

Depth 16

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Viewport 0 0

Depth 24

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

EndSection

 

Section "Screen"

Identifier "aticonfig-Screen[0]"

Device "aticonfig-Device[0]"

Monitor "aticonfig-Monitor[0]"

DefaultDepth 24

SubSection "Display"

Viewport 0 0

Depth 24

EndSubSection

EndSection

 

Section "DRI"

Mode 0660

EndSection

 

Section "ServerFlags"

Option "AIGLX" "off"

EndSection

 

Section "Extensions"

Option "Composite" "Disable"

EndSection

 

[BarteBaluba]

'# Load "dri"' fjern #.

[LessThanJake]

Bare for å gjøre listen over måter å lage xorg.conf på komplett , jeg pleier å ha best erfaringer med: "Xorg -configure". Liker den best siden den ikke er interaktiv(i motsettning til xorgconfig), og den er en offisiell del av X.org(i motsettning til hwd).