Gå til innhold

Ubuntu 6.10, svart skjerm ved oppstart

Stian89

Av Stian89
i Operativsystemer

Anbefalte innlegg

Stian89

Stian89

Skrevet
Skrevet

Hei.

 

Sitter her på en HP Pavilion dv6000 og prøver å installere Ubuntu Edgy Eft.

 

Når jeg satte i og prøvde å boote livecd'en, og akkurat skulle komme til login skjermen, når x starter, blir skjermen svart (ingen virtuelle terminaler (alt+ctrl+Fx) som funker heller). Virker som at skjermen dør / går i standby e.l.

 

Jeg prøvde derretter å boote på nytt med live cd, men under boot denne gangen trykket jeg F4 - VGA, og satte oppløsningen til 1024x768, 32bit. Nå starter plutselig X uten at skjermen blir svart, i tillegg til at oppløsningen er 1280x800 slik den skal være, ikke 1024 som jeg satte den til. Jeg greide nå å installere OS til disk.

 

Når jeg nå prøver å boote OS fra disk, får jeg samme problem som jeg opprinnelig hadde ved å boote OS fra cd, skjermen og alle virtuelle terminaler dør i det X skal starte.

 

(Har også sammenlignet xorg.conf fra livecd og på hd, begge er prikk like)

 

Noen som har forslag til hva jeg kan gjøre?

 

 

amd turion 64 mobile 2ghz, 1gb ddr2 ram, geforce 7200(hvis jeg ikke tar helt feil)

Lenke til kommentar

Videoannonse

Videoannonse
Annonse
Stian89

Stian89

Skrevet
  • Forfatter
Skrevet (endret)

xorg.conf:

Klikk for å se/fjerne innholdet nedenfor
# /etc/X11/xorg.conf (xorg X Window System server configuration file)

#

# This file was generated by dexconf, the Debian X Configuration tool, using

# values from the debconf database.

#

# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.

# (Type "man /etc/X11/xorg.conf" at the shell prompt.)

#

# This file is automatically updated on xserver-xorg package upgrades *only*

# if it has not been modified since the last upgrade of the xserver-xorg

# package.

#

# If you have edited this file but would like it to be automatically updated

# again, run the following command:

# sudo dpkg-reconfigure -phigh xserver-xorg

 

Section "Files"

FontPath "/usr/share/X11/fonts/misc"

FontPath "/usr/share/X11/fonts/cyrillic"

FontPath "/usr/share/X11/fonts/100dpi/:unscaled"

FontPath "/usr/share/X11/fonts/75dpi/:unscaled"

FontPath "/usr/share/X11/fonts/Type1"

FontPath "/usr/share/X11/fonts/100dpi"

FontPath "/usr/share/X11/fonts/75dpi"

FontPath "/usr/share/fonts/X11/misc"

# path to defoma fonts

FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"

EndSection

 

Section "Module"

Load "i2c"

Load "bitmap"

Load "ddc"

Load "dri"

Load "extmod"

Load "freetype"

Load "glx"

Load "int10"

Load "type1"

Load "vbe"

EndSection

 

Section "InputDevice"

Identifier "Generic Keyboard"

Driver "kbd"

Option "CoreKeyboard"

Option "XkbRules" "xorg"

Option "XkbModel" "pc105"

Option "XkbLayout" "no"

Option "XkbOptions" "lv3:ralt_switch"

EndSection

 

Section "InputDevice"

Identifier "Configured Mouse"

Driver "mouse"

Option "CorePointer"

Option "Device" "/dev/input/mice"

Option "Protocol" "ExplorerPS/2"

Option "ZAxisMapping" "4 5"

Option "Emulate3Buttons" "true"

EndSection

 

Section "InputDevice"

Identifier "Synaptics Touchpad"

Driver "synaptics"

Option "SendCoreEvents" "true"

Option "Device" "/dev/psaux"

Option "Protocol" "auto-dev"

Option "HorizScrollDelta" "0"

EndSection

 

Section "InputDevice"

Driver "wacom"

Identifier "stylus"

Option "Device" "/dev/wacom" # Change to

# /dev/input/event

# for USB

Option "Type" "stylus"

Option "ForceDevice" "ISDV4" # Tablet PC ONLY

EndSection

 

Section "InputDevice"

Driver "wacom"

Identifier "eraser"

Option "Device" "/dev/wacom" # Change to

# /dev/input/event

# for USB

Option "Type" "eraser"

Option "ForceDevice" "ISDV4" # Tablet PC ONLY

EndSection

 

Section "InputDevice"

Driver "wacom"

Identifier "cursor"

Option "Device" "/dev/wacom" # Change to

# /dev/input/event

# for USB

Option "Type" "cursor"

Option "ForceDevice" "ISDV4" # Tablet PC ONLY

EndSection

 

Section "Device"

Identifier "NVIDIA Corporation NVIDIA Default Card"

Driver "nv"

BusID "PCI:5:0:0"

EndSection

 

Section "Monitor"

Identifier "Generic Monitor"

Option "DPMS"

HorizSync 28-64

VertRefresh 43-60

EndSection

 

Section "Screen"

Identifier "Default Screen"

Device "NVIDIA Corporation NVIDIA Default Card"

Monitor "Generic Monitor"

DefaultDepth 16

SubSection "Display"

Depth 1

Modes "1280x800"

EndSubSection

SubSection "Display"

Depth 4

Modes "1280x800"

EndSubSection

SubSection "Display"

Depth 8

Modes "1280x800"

EndSubSection

SubSection "Display"

Depth 15

Modes "1280x800"

EndSubSection

SubSection "Display"

Depth 16

Modes "1280x800"

EndSubSection

SubSection "Display"

Depth 24

Modes "1280x800"

EndSubSection

EndSection

 

Section "ServerLayout"

Identifier "Default Layout"

Screen "Default Screen"

InputDevice "Generic Keyboard"

InputDevice "Configured Mouse"

InputDevice "stylus" "SendCoreEvents"

InputDevice "cursor" "SendCoreEvents"

InputDevice "eraser" "SendCoreEvents"

InputDevice "Synaptics Touchpad"

EndSection

 

Section "DRI"

Mode 0666

EndSection

 

 

 

@kommers: noapic gav med desverre ingen resultater

 

 

glemte dmesg (ikke hørt om, men regner med at jeg bare skulle kjøre i terminal, det gir følgende)

Klikk for å se/fjerne innholdet nedenfor
[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)

[17179569.184000] BIOS-provided physical RAM map:

[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)

[17179569.184000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)

[17179569.184000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)

[17179569.184000] BIOS-e820: 0000000000100000 - 000000003ff00000 (usable)

[17179569.184000] BIOS-e820: 000000003ff00000 - 000000003ff17000 (ACPI data)

[17179569.184000] BIOS-e820: 000000003ff17000 - 000000003ff80000 (ACPI NVS)

[17179569.184000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)

[17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)

[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)

[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)

[17179569.184000] 127MB HIGHMEM available.

[17179569.184000] 896MB LOWMEM available.

[17179569.184000] found SMP MP-table at 000f89a0

[17179569.184000] On node 0 totalpages: 261888

[17179569.184000] DMA zone: 4096 pages, LIFO batch:0

[17179569.184000] Normal zone: 225280 pages, LIFO batch:31

[17179569.184000] HighMem zone: 32512 pages, LIFO batch:7

[17179569.184000] DMI present.

[17179569.184000] ACPI: RSDP (v000 HP ) @ 0x000f8970

[17179569.184000] ACPI: RSDT (v001 HP RSDT 0x06040000 LTP 0x00000000) @ 0x3ff0fc14

[17179569.184000] ACPI: FADT (v001 HP MCP51M 0x06040000 PTL_ 0x000f4240) @ 0x3ff16dcd

[17179569.184000] ACPI: SSDT (v001 HP POWERNOW 0x06040000 LTP 0x00000001) @ 0x3ff16e41

[17179569.184000] ACPI: MCFG (v001 HP MCFG 0x06040000 LTP 0x00000000) @ 0x3ff16f56

[17179569.184000] ACPI: MADT (v001 HP APIC 0x06040000 LTP 0x00000000) @ 0x3ff16f92

[17179569.184000] ACPI: BOOT (v001 HP $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3ff16fd8

[17179569.184000] ACPI: DSDT (v001 HP MCP51M 0x06040000 MSFT 0x0100000e) @ 0x00000000

[17179569.184000] ACPI: PM-Timer IO Port: 0x1008

[17179569.184000] ACPI: Local APIC address 0xfee00000

[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[17179569.184000] Processor #0 15:12 APIC version 16

[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])

[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])

[17179569.184000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23

[17179569.184000] ACPI: IRQ9 used by override.

[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs

[17179569.184000] Using ACPI (MADT) for SMP configuration information

[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)

[17179569.184000] Built 1 zonelists

[17179569.184000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper xforcevesa initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- vga=0x318 console-setup/layoutcode=no

[17179569.184000] mapped APIC to ffffd000 (fee00000)

[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)

[17179569.184000] Enabling fast FPU save and restore... done.

[17179569.184000] Enabling unmasked SIMD FPU exception support... done.

[17179569.184000] Initializing CPU#0

[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)

[17179569.184000] Detected 2009.552 MHz processor.

[17179569.184000] Using pmtmr for high-res timesource

[17179569.184000] Console: colour dummy device 80x25

[17179573.224000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[17179573.224000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[17179573.240000] Memory: 1028548k/1047552k available (1910k kernel code, 18336k reserved, 1070k data, 308k init, 130048k highmem)

[17179573.240000] Checking if this processor honours the WP bit even in supervisor mode... Ok.

[17179573.320000] Calibrating delay using timer specific routine.. 4024.60 BogoMIPS (lpj=8049211)

[17179573.320000] Security Framework v1.0.0 initialized

[17179573.320000] SELinux: Disabled at boot.

[17179573.320000] Mount-cache hash table entries: 512

[17179573.320000] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d

[17179573.320000] CPU: After vendor identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d

[17179573.320000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

[17179573.320000] CPU: L2 Cache: 512K (64 bytes/line)

[17179573.320000] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001d

[17179573.320000] Checking 'hlt' instruction... OK.

[17179573.336000] SMP alternatives: switching to UP code

[17179573.336000] Freeing SMP alternatives: 16k freed

[17179573.336000] checking if image is initramfs... it is

[17179573.792000] Freeing initrd memory: 5564k freed

[17179573.792000] ACPI: Core revision 20060707

[17179573.796000] ACPI: Looking for DSDT ... not found!

[17179573.800000] CPU0: AMD Turion 64 Mobile Technology MK-36 stepping 02

[17179573.800000] Total of 1 processors activated (4024.60 BogoMIPS).

[17179573.804000] ENABLING IO-APIC IRQs

[17179573.804000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1

[17179573.952000] Brought up 1 CPUs

[17179573.952000] migration_cost=0

[17179573.952000] NET: Registered protocol family 16

[17179573.952000] EISA bus registered

[17179573.952000] ACPI: bus type pci registered

[17179573.952000] PCI: Using MMCONFIG

[17179573.952000] PCI: No mmconfig possible on 0:18

[17179573.952000] PCI: No mmconfig possible on 7:5

[17179573.952000] Setting up standard PCI resources

[17179573.956000] ACPI: Interpreter enabled

[17179573.956000] ACPI: Using IOAPIC for interrupt routing

[17179573.956000] ACPI: PCI Root Bridge [PCI0] (0000:00)

[17179573.956000] PCI: Probing PCI hardware (bus 00)

[17179573.956000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0

[17179573.956000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0d.0

[17179573.960000] Boot video device is 0000:05:00.0

[17179573.960000] PCI: Transparent bridge - 0000:00:10.0

[17179573.960000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[17179573.984000] ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.

[17179573.984000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]

[17179573.984000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]

[17179573.984000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]

[17179573.984000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]

[17179573.988000] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.

[17179573.988000] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)

[17179573.988000] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15)

[17179573.988000] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.

[17179573.988000] ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *11

[17179573.988000] ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.

[17179573.988000] ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.

[17179573.988000] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.

[17179573.988000] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10

[17179573.988000] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *10

[17179573.988000] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11

[17179573.988000] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7

[17179573.988000] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *10

[17179573.992000] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.

[17179573.992000] ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.

[17179573.992000] ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.

[17179573.992000] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.

[17179573.992000] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5

[17179573.992000] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.

[17179573.992000] Linux Plug and Play Support v0.97 © Adam Belay

[17179573.992000] pnp: PnP ACPI init

[17179573.992000] pnp: PnP ACPI: found 11 devices

[17179573.992000] PnPBIOS: Disabled by ACPI PNP

[17179573.992000] PCI: Using ACPI for IRQ routing

[17179573.992000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

[17179573.996000] pnp: 00:03: ioport range 0x1000-0x107f could not be reserved

[17179573.996000] pnp: 00:03: ioport range 0x1080-0x10ff has been reserved

[17179573.996000] pnp: 00:03: ioport range 0x1400-0x147f has been reserved

[17179573.996000] pnp: 00:03: ioport range 0x1480-0x14ff could not be reserved

[17179573.996000] pnp: 00:03: ioport range 0x1800-0x187f has been reserved

[17179573.996000] pnp: 00:03: ioport range 0x1880-0x18ff has been reserved

[17179573.996000] pnp: 00:03: ioport range 0x2000-0x203f has been reserved

[17179573.996000] PCI: Bridge: 0000:00:02.0

[17179573.996000] IO window: 4000-4fff

[17179573.996000] MEM window: c0200000-c03fffff

[17179573.996000] PREFETCH window: c3200000-c33fffff

[17179573.996000] PCI: Bridge: 0000:00:03.0

[17179573.996000] IO window: disabled.

[17179573.996000] MEM window: c0400000-c05fffff

[17179573.996000] PREFETCH window: disabled.

[17179573.996000] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:05:00.0

[17179573.996000] PCI: Bridge: 0000:00:04.0

[17179573.996000] IO window: disabled.

[17179573.996000] MEM window: c1000000-c2ffffff

[17179573.996000] PREFETCH window: d0000000-dfffffff

[17179573.996000] PCI: Bridge: 0000:00:10.0

[17179573.996000] IO window: disabled.

[17179573.996000] MEM window: c3000000-c30fffff

[17179573.996000] PREFETCH window: disabled.

[17179573.996000] PCI: Setting latency timer of device 0000:00:02.0 to 64

[17179573.996000] PCI: Setting latency timer of device 0000:00:03.0 to 64

[17179573.996000] PCI: Setting latency timer of device 0000:00:04.0 to 64

[17179573.996000] PCI: Setting latency timer of device 0000:00:10.0 to 64

[17179573.996000] NET: Registered protocol family 2

[17179574.036000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[17179574.036000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[17179574.036000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[17179574.036000] TCP: Hash tables configured (established 131072 bind 65536)

[17179574.036000] TCP reno registered

[17179574.036000] Simple Boot Flag at 0x36 set to 0x1

[17179574.036000] audit: initializing netlink socket (disabled)

[17179574.036000] audit(1172128212.036:1): initialized

[17179574.036000] highmem bounce pool size: 64 pages

[17179574.036000] VFS: Disk quotas dquot_6.5.1

[17179574.036000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[17179574.036000] Initializing Cryptographic API

[17179574.036000] io scheduler noop registered

[17179574.036000] io scheduler anticipatory registered

[17179574.036000] io scheduler deadline registered

[17179574.036000] io scheduler cfq registered (default)

[17179574.036000] PCI: Setting latency timer of device 0000:00:02.0 to 64

[17179574.036000] pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS

[17179574.036000] assign_interrupt_mode Found MSI capability

[17179574.036000] Allocate Port Service[0000:00:02.0:pcie00]

[17179574.036000] Allocate Port Service[0000:00:02.0:pcie03]

[17179574.036000] PCI: Setting latency timer of device 0000:00:03.0 to 64

[17179574.036000] pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS

[17179574.036000] assign_interrupt_mode Found MSI capability

[17179574.036000] Allocate Port Service[0000:00:03.0:pcie00]

[17179574.036000] Allocate Port Service[0000:00:03.0:pcie03]

[17179574.036000] PCI: Setting latency timer of device 0000:00:04.0 to 64

[17179574.036000] pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS

[17179574.036000] assign_interrupt_mode Found MSI capability

[17179574.036000] Allocate Port Service[0000:00:04.0:pcie00]

[17179574.036000] Allocate Port Service[0000:00:04.0:pcie03]

[17179574.036000] isapnp: Scanning for PnP cards...

[17179574.388000] isapnp: No Plug & Play device found

[17179574.408000] Real Time Clock Driver v1.12ac

[17179574.408000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[17179574.408000] mice: PS/2 mouse device common for all mice

[17179574.408000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize

[17179574.408000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

[17179574.408000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

[17179574.408000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12

[17179574.440000] serio: i8042 AUX port at 0x60,0x64 irq 12

[17179574.444000] serio: i8042 KBD port at 0x60,0x64 irq 1

[17179574.448000] EISA: Probing bus 0 at eisa.0

[17179574.448000] Cannot allocate resource for EISA slot 1

[17179574.448000] Cannot allocate resource for EISA slot 2

[17179574.448000] Cannot allocate resource for EISA slot 3

[17179574.448000] Cannot allocate resource for EISA slot 4

[17179574.448000] EISA: Detected 0 cards.

[17179574.448000] TCP bic registered

[17179574.448000] NET: Registered protocol family 1

[17179574.448000] NET: Registered protocol family 8

[17179574.448000] NET: Registered protocol family 20

[17179574.448000] Using IPI No-Shortcut mode

[17179574.448000] ACPI: (supports S0 S3 S4 S5)

[17179574.448000] Freeing unused kernel memory: 308k freed

[17179574.536000] input: AT Translated Set 2 keyboard as /class/input/input0

[17179574.540000] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.

[17179574.580000] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 65536k

[17179574.580000] vesafb: mode is 1024x768x32, linelength=4096, pages=1

[17179574.580000] vesafb: protected mode interface info at c000:d5d0

[17179574.580000] vesafb: scrolling: redraw

[17179574.580000] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0

[17179574.640000] Console: switching to colour frame buffer device 128x48

[17179574.640000] fb0: VESA VGA frame buffer device

[17179575.720000] Capability LSM initialized

[17179575.752000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]

[17179575.752000] ACPI: Getting cpuindex for acpiid 0x1

[17179575.752000] ACPI: Thermal Zone [THRM] (62 C)

[17179576.112000] SCSI subsystem initialized

[17179576.116000] libata version 1.20 loaded.

[17179576.116000] sata_nv 0000:00:0e.0: version 0.8

[17179576.116000] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23

[17179576.116000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 209

[17179576.116000] PCI: Setting latency timer of device 0000:00:0e.0 to 64

[17179576.116000] ata1: SATA max UDMA/133 cmd 0x30C0 ctl 0x30B6 bmdma 0x3090 irq 209

[17179576.116000] ata2: SATA max UDMA/133 cmd 0x30B8 ctl 0x30B2 bmdma 0x3098 irq 209

[17179576.320000] ata1: SATA link up 1.5 Gbps (SStatus 113)

[17179576.484000] ata1: dev 0 cfg 49:2f00 82:306b 83:7c09 84:6003 85:3069 86:3c09 87:6003 88:203f

[17179576.484000] ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48

[17179576.500000] ata1: dev 0 configured for UDMA/100

[17179576.500000] scsi0 : sata_nv

[17179576.704000] ata2: SATA link down (SStatus 0)

[17179576.704000] scsi1 : sata_nv

[17179576.708000] Vendor: ATA Model: ST980811AS Rev: 3.BH

[17179576.708000] Type: Direct-Access ANSI SCSI revision: 05

[17179576.708000] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0

[17179576.708000] NFORCE-MCP51: chipset revision 241

[17179576.708000] NFORCE-MCP51: not 100% native mode: will probe irqs later

[17179576.708000] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.

[17179576.708000] NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller

[17179576.708000] ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio

[17179576.708000] Probing IDE interface ide0...

[17179576.724000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)

[17179576.724000] sda: Write Protect is off

[17179576.724000] sda: Mode Sense: 00 3a 00 00

[17179576.724000] SCSI device sda: drive cache: write back

[17179576.724000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)

[17179576.724000] sda: Write Protect is off

[17179576.724000] sda: Mode Sense: 00 3a 00 00

[17179576.724000] SCSI device sda: drive cache: write back

[17179576.724000] sda: sda1 sda2 < sda5 >

[17179576.900000] sd 0:0:0:0: Attached scsi disk sda

[17179577.448000] hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive

[17179577.788000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

[17179577.796000] hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, (U)DMA

[17179577.796000] Uniform CD-ROM driver Revision: 3.20

[17179577.916000] Probing IDE interface ide1...

[17179577.948000] usbcore: registered new driver usbfs

[17179577.948000] usbcore: registered new driver hub

[17179577.948000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)

[17179577.952000] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22

[17179577.952000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ 217

[17179577.952000] PCI: Setting latency timer of device 0000:00:0b.0 to 64

[17179577.952000] ohci_hcd 0000:00:0b.0: OHCI Host Controller

[17179577.952000] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1

[17179578.152000] ohci_hcd 0000:00:0b.0: irq 217, io mem 0xc0004000

[17179578.208000] ieee1394: Initialized config rom entry `ip1394'

[17179578.216000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.

[17179578.228000] usb usb1: configuration #1 chosen from 1 choice

[17179578.228000] hub 1-0:1.0: USB hub found

[17179578.228000] hub 1-0:1.0: 8 ports detected

[17179578.336000] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21

[17179578.336000] ACPI: PCI Interrupt 0000:00:0b.1 -> Link [LUS2] -> GSI 21 (level, high) -> IRQ 225

[17179578.336000] PCI: Setting latency timer of device 0000:00:0b.1 to 64

[17179578.336000] ehci_hcd 0000:00:0b.1: EHCI Host Controller

[17179578.336000] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2

[17179578.336000] ehci_hcd 0000:00:0b.1: debug port 1

[17179578.336000] PCI: cache line size of 64 is not supported by device 0000:00:0b.1

[17179578.336000] ehci_hcd 0000:00:0b.1: irq 225, io mem 0xc0005000

[17179578.336000] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[17179578.336000] usb usb2: configuration #1 chosen from 1 choice

[17179578.336000] hub 2-0:1.0: USB hub found

[17179578.336000] hub 2-0:1.0: 8 ports detected

[17179578.452000] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20

[17179578.452000] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 20 (level, high) -> IRQ 233

[17179578.452000] PCI: Setting latency timer of device 0000:00:14.0 to 64

[17179578.452000] forcedeth: using HIGHDMA

[17179578.976000] eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0

[17179578.976000] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11

[17179578.976000] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 11 (level, high) -> IRQ 11

[17179579.028000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[c3000000-c30007ff] Max Packet=[2048] IR/IT contexts=[4/4]

[17179580.264000] ISO 9660 Extensions: Microsoft Joliet Level 3

[17179580.308000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc0009729c200]

[17179580.356000] ISO 9660 Extensions: RRIP_1991A

[17179580.452000] Registering unionfs 1.1.4

[17179580.460000] loop: loaded (max 8 devices)

[17179580.592000] squashfs: version 3.0 (2006/03/15) Phillip Lougher

[17179672.444000] input: PC Speaker as /class/input/input1

[17179672.788000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[17179674.336000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[17179674.940000] sdhci: Secure Digital Host Controller Interface driver, 0.12

[17179674.940000] sdhci: Copyright© Pierre Ossman

[17179674.940000] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)

[17179674.940000] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10

[17179674.940000] ACPI: PCI Interrupt 0000:07:05.1 -> Link [LNK2] -> GSI 10 (level, high) -> IRQ 10

[17179674.940000] mmc0: SDHCI at 0xc3000800 irq 10 DMA

[17179675.168000] Linux agpgart interface v0.101 © Dave Jones

[17179675.272000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000

[17179675.340000] input: SynPS/2 Synaptics TouchPad as /class/input/input2

[17179675.352000] ieee80211_crypt: registered algorithm 'NULL'

[17179675.384000] ieee80211: 802.11 data/management/control stack, git-1.1.13

[17179675.384000] ieee80211: Copyright © 2004-2005 Intel Corporation <[email protected]>

[17179675.596000] bcm43xx driver

[17179675.596000] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 19

[17179675.596000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 19 (level, high) -> IRQ 50

[17179675.596000] PCI: Setting latency timer of device 0000:03:00.0 to 64

[17179675.608000] eth0: no link during initialization.

[17179675.816000] sd 0:0:0:0: Attached scsi generic sg0 type 0

[17179676.172000] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 18

[17179676.172000] ACPI: PCI Interrupt 0000:00:10.1 -> Link [LAZA] -> GSI 18 (level, high) -> IRQ 58

[17179676.172000] PCI: Setting latency timer of device 0000:00:10.1 to 64

[17179676.268000] ts: Compaq touchscreen protocol output

[17179676.524000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.

[17179676.540000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.

[17179676.724000] NET: Registered protocol family 17

[17179685.000000] ACPI: AC Adapter [ACAD] (on-line)

[17179685.036000] ACPI: Battery Slot [bAT0] (battery present)

[17179685.128000] ACPI: Power Button (FF) [PWRF]

[17179685.128000] ACPI: Power Button (CM) [PWRB]

[17179685.128000] ACPI: Sleep Button (CM) [sLPB]

[17179685.128000] ACPI: Lid Switch [LID]

[17179685.296000] ibm_acpi: ec object not found

[17179685.412000] pcc_acpi: loading...

[17179685.540000] wmi_add device=dffab400

[17179685.540000] calling WQBA

[17179685.664000] ACPI: Video Device [uVGA] (multi-head: yes rom: no post: no)

[17179685.664000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)

[17179686.480000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)

[17179686.480000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe (1200 mV)

[17179686.480000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10 (1150 mV)

[17179686.480000] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x12 (1100 mV)

[17179686.480000] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18 (950 mV)

[17179686.480000] cpu_init done, current fid 0xc, vid 0xe

[17179691.984000] lp: driver loaded but no devices found

[17179692.236000] ppdev: user-space parallel port driver

[17179706.784000] apm: BIOS not found.

[17179730.428000] NET: Registered protocol family 10

[17179730.428000] lo: Disabled Privacy Extensions

[17179730.428000] ADDRCONF(NETDEV_UP): eth0: link is not ready

[17179730.428000] IPv6 over IPv4 tunneling driver

[17179737.172000] Bluetooth: Core ver 2.8

[17179737.172000] NET: Registered protocol family 31

[17179737.172000] Bluetooth: HCI device and connection manager initialized

[17179737.172000] Bluetooth: HCI socket layer initialized

[17179737.840000] Bluetooth: L2CAP ver 2.8

[17179737.840000] Bluetooth: L2CAP socket layer initialized

[17179740.644000] Bluetooth: RFCOMM socket layer initialized

[17179740.644000] Bluetooth: RFCOMM TTY layer initialized

[17179740.644000] Bluetooth: RFCOMM ver 1.7

[17179809.212000] eth0: link up.

[17179809.216000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[17179819.724000] eth0: no IPv6 routers present

Endret av Stian89
Lenke til kommentar

Opprett en konto eller logg inn for å kommentere

Du må være et medlem for å kunne skrive en kommentar

Opprett konto

Det er enkelt å melde seg inn for å starte en ny konto!

Start en konto

Logg inn

Har du allerede en konto? Logg inn her.

Logg inn nå
Gå til emneliste

  • Hvem er aktive   0 medlemmer

    • Ingen innloggede medlemmer aktive
×
×
  • Opprett ny...