Hvordan ta backup av x360 spill

[jimmil]

Noen som vet hvordan man tar backup av x360 spill?

[dapperdan]

Noen som vet hvordan man tar backup av x360 spill?

7346239[/snapback]

Du finner nok det du trenger her: http://xbox-scene.com/tools-xbox360.php

[Zappza]

Les litt i "Chipping / Modding av Xbox 360", der finner du mye nyttig

 

 

----------------------------------------

Legacy information for creating backups.

----------------------------------------

 

 

Extracting Security Sector

---------------------------------------

 

Ensue SATA cable is plugged from drive to PC.

(This is very important as may be possible in future for console to detect modified firmware due to Inquiry routine enabled for Windows)

 

Power on Xbox 360.

Insert Enable0800 DVD into drive. Wait 5 or so seconds then remove the Enable0800 DVD. Drive now in 0800 mode.

Turn on PC and wait for Windows to boot

Insert original game disk into drive and wait for windows to detect disk change

Run DVDinfoPro

Enter the following four custom cdb commands:

 

AD 00 FF 02 FD FF FE 00 08 00 01 C0

AD 00 FF 02 FD FF FE 00 08 00 03 C0

AD 00 FF 02 FD FF FE 00 08 00 05 C0

AD 00 FF 02 FD FF FE 00 08 00 07 C0

 

Then save hexadecimal display as bin file as SS.bin

 

Extracting PFI (Physical Format Information) Sector

-------------------------------------------------------------------

Run DVDinfoPro

From Advanced Commands pull down menu choose Send Custom Command

From Preset Commands pull down menu choose "00h Physical Format Information" from under the Read DVD Struct Commands heading

Click Send

Then save hexadecimal display as bin file as PFI.bin

 

Extracting DMI (Disk Manufacturing Information) Sector

-------------------------------------------------------------------

Run DVDinfoPro

From Advanced Commands pull down menu choose "04h Disc Manufacturing Info"

Click OK on Read DVD Structure Option window

Then save hexadecimal display as bin file as DMI.bin

 

 

 

Creating a game backup

-----------------------------------

Drive is still in 0800 mode.

Extract Isobuilder.rar

Insert original game disk into drive and wait for windows to detect disk change

Run DVDinfoPro

Enter the following custom cdb command to unlock drive: (game data visable)

 

FF 08 01 01 05 01 03 00 04 07 (new in MS28)

 

Run Isobuster

Right click on DVD and select Extract From-To

Click Length and enter number of LBAs as follows:

 

Xbox 1 Original Number of LBA to read 3431264 decimal

or

Xbox 360 Original Number of LBA to read 3567872 decimal

Select User Data (2048 bytes/block)

Click Start Extraction

Enter filename as game.iso and click Save

Upon read error dialogue box choose fill with blank zeros for sector and select use this selection for all errors

Copy game.iso, ss.bin, PFI.bin and DMI.bin to the relevent isobuilder directory (Depending on Xbox 360 or Xbox 1 game)

Run build360.bat (Xbox 360 game) or build.bat (xbox 1 game).

These batch files now expect PFI and DMI bin files

Burn with CloneCd and choose the image.dvd file

 

 

Regner med du allerede vet at du må flashe den med Enable0800 først jeg