Speedtouch 546i med passordløs ISP

[Ibanez99]

Hei..

 

Jeg lurte på om det finnes en firmware for 546i router modem, som har den funksjonen å slå av brukernavn og passord for å koble seg opp mot nett??

 

Med min ISP trenger man ikke brukernavn og passord for å komme seg på internett..

 

Oppsettet min ISP bruker er dette:

 

Name: ISP

Mode: Routing

Encapsulation: Enet Encap

Multiplex: LLC

VPI: 0

VCI: 33

ATM Qos Type: UBR

[Ibanez99]

Er det virkelig ingen som vet hvordan?

 

Ok..jeg skal gjøre det litt enklere, og jeg prøver igjen...lekte litt med Telnet på modemet.... og lastet ned template fila fra 546i firmwaren som jeg har oppdatert modemet med..

 

Her er template fila:

 

[ env.ini ]

set var=CONF_DEVICE value="516|536|546"

set var=CONF_REGION value="UK"

set var=CONF_PROVIDER value="All"

set var=CONF_DESCRIPTION value="UK Custom Routed PPP connection (Public Subnet config etc)"

set var=CONF_SERVICE value="Data (Custom)"

set var=CONF_DATE value=""

set var=CONF_TPVERSION value="2.0.0"

set var=HOST_SETUP value="auto"

set var=HOST_LANGUAGE value="en"

set var=UPGRADE_URL value="http://www.speedtouch.co.uk/upgrade"

set var=ATM_ulp value="pppoa"

set var=ATM_addr value="0.38"

set var=%ST_SYS_USERID value="Administrator"

set var=%ST_SYS_PASSWORD value=""

set var=SESSIONTIMEOUT value=600

 

[ wizard.ini ]

' ATM PVC

'--------

def var=ATM type=grp desc="Specify the details of your Internet connection. All information should be provided by your ISP." alias="Routed Internet Connection"

def var=ATM_addr type=combo grp=ATM alias="VPI/VCI" data="0.38,1.50,8.35" desc="Select VPI/VCI (UK Default 0.38)"

def var=ATM_ulp type=combo grp=ATM alias="Connection Type" data="PPPoA,PPPoE" desc="Select Connection Type (UK Default PPPoA)"

def var=ST_PPP_USER type=string grp=ATM alias="User Name" req=yes desc="Enter your Internet connection user name, e.g. [email protected]"

def var=%ST_PPP_PASSWORD type=passw grp=ATM alias="Password" req=no desc="Enter your Internet connection password (if required)." max=32

'Router Address

'-------------

def var=gateadd type=grp desc="Enter the Router IP address information. This information may have been provided by your Internet Service Provider." alias="Router Addressing"

def var=Addmode type=list grp=gateadd alias="LAN Addressing Scheme" desc="Specify the appropriate IP address option for your SpeedTouch" data="enabled,transparent" dalias="Private(with-NAT),Public(without-NAT)" default="private" req=yes

def var=gateway type=ipaddr grp=gateadd alias="IP address of your SpeedTouch" desc="Note: Add this as the default gateway on any static PC clients." default="192.168.1.254" req=yes

def var=en_net type=ipaddr grp=gateadd alias="Ethernet Subnet" desc="Enter the subnet network address." default="192.168.1.1" req=yes

def var=en_mask type=ipmask grp=gateadd alias="Ethernet Mask" desc="Enter the subnet mask." default="255.255.255.0" req=yes

'lanDHCP Settings

'-------------

def var=lanDHCP type=grp desc="Address information for use on your local network" alias="Address Management"

def var=Sstate type=bool grp=lanDHCP alias="Enable DHCP" desc="Allocate IP addresses locally using DHCP?" data="disabled,enabled" default="enabled"

def var=FirstDHCP type=ipaddr grp=lanDHCP alias="Enter First DHCP Address" desc="This address is only used if the DHCP server has been enabled" default="192.168.1.64" req=yes

def var=LastDHCP type=ipaddr grp=lanDHCP alias="Enter Last DHCP Address" desc="This address is only used if the DHCP server has been enabled" default="192.168.1.253" req=yes

 

[ phone.ini ]

add name=usb_port addr=usb.0.35 logging=disabled

add name=pvc_Internet addr=$ATM_addr

 

[ ipqos.ini ]

config dest=pvc_Internet state=enabled

queue config dest=pvc_Internet queue=1 ackfiltering=enabled

 

[ atm.ini ]

ifadd intf=usbif1 dest=usb_port logging=disabled

ifconfig intf=usbif1 ulp=mac retry=0 logging=disabled

ifattach intf=usbif1 logging=disabled

ifadd intf=atm_Internet

ifconfig intf=atm_Internet dest=pvc_Internet

#if ATM_ulp=PPPoE

ifconfig intf=atm_Internet ulp=mac encaps=llc

#endif

#if ATM_ulp=PPPoA

ifconfig intf=atm_Internet ulp=ppp encaps=vcmux

#endif

#if ATM_addr=1.50

ifconfig intf=atm_Internet ulp=ppp encaps=llc

#endif

ifattach intf=atm_Internet

 

[ eth.ini ]

#if ATM_ulp=PPPoE

ifadd intf=ethoa_Internet

ifconfig intf=ethoa_Internet dest=atm_Internet

ifattach intf=ethoa_Internet

#endif

 

[ ppprelay.ini ]

 

[ ppp.ini ]

ifadd intf=Internet

rtadd intf=Internet dst=0.0.0.0/0 src=0.0.0.0/0 metric=10

#if ATM_ulp=PPPoE

ifconfig intf=Internet dest=ethoa_Internet

#else

ifconfig intf=Internet dest=atm_Internet

#endif

ifconfig intf=Internet user=$ST_PPP_USER password=$%ST_PPP_PASSWORD

ifconfig intf=Internet accomp=enabled format=none dnsmetric=10 idletime=0 restart=enabled

ifattach intf=Internet

 

[ dhcspool.ini ]

pool add name=LAN_custom

 

[ dhcs.ini ]

debug traceconfig state=disabled

policy verifyfirst=enabled trustclient=enabled

pool config name=LAN_custom intf=LocalNetwork poolstart=$FirstDHCP poolend=$LastDHCP netmask=$en_mask gateway=$gateway server=10.0.0.138 leasetime=86400

 

[ nat.ini ]

ifconfig intf=Internet translation=$Addmode

#if $Addmode=transparent

mapadd intf=Internet inside_addr=127.0.0.1 protocol=tcp outside_port=51003-51003 inside_port=443-443

#endif

config

 

[ ip.ini ]

ifadd intf=LocalNetwork dest=bridge

ifattach intf=LocalNetwork

config forwarding=enabled redirects=enabled netbroadcasts=disabled ttl=64 fraglimit=64 defragmode=enabled addrcheck=dynamic mssclamping=enabled

config checkoptions=enabled

config natloopback=disabled

ipadd intf=LocalNetwork addr=192.168.1.254/24 addroute=disabled

ipadd intf=LocalNetwork addr=10.0.0.138/24 addroute=disabled

#if $Addmode=enabled

ipadd intf=LocalNetwork addr=$gateway netmask=$en_mask addroute=enabled

ipconfig addr=$gateway preferred=enabled primary=enabled

#else

rtadd dst=$en_net dstmsk=$en_mask intf=LocalNetwork

arpadd intf=LocalNetwork ip=$gateway hwaddr=$_MACADDR

#endif

ifconfig intf=loop mtu=65535 group=local

ifconfig intf=LocalNetwork mtu=1500 group=lan linksensing=disabled primary=enabled

rtadd dst=192.168.1.0/24 gateway=192.168.1.254

rtadd dst=10.0.0.0/24 gateway=10.0.0.138

rtadd dst=255.255.255.255/32 gateway=127.0.0.1

rtadd dst=224.0.0.0/4 intf=LocalNetwork

 

[ servmgr.ini ]

ifadd name=PPTP group=lan

ifadd name=HTTP group=lan

ifadd name=HTTPs group=lan

ifadd name=FTP group=lan

ifadd name=TELNET group=lan

ifadd name=DNS-S group=lan

ifadd name=SSDP group=lan

ifadd name=SNMP_AGENT group=lan

ifadd name=MDAP group=lan

ifadd name=PING_RESPONDER group=lan

modify name=PPTP state=enabled

modify name=DNS-C state=enabled

modify name=SNTP state=disabled

modify name=HTTP state=enabled

modify name=HTTPs state=enabled

modify name=WEBF state=disabled

modify name=FTP state=enabled

modify name=TELNET state=enabled

modify name=RIP state=disabled

modify name=DNS-S state=enabled

modify name=DHCP-S state=$Sstate

modify name=VOIP_SIP state=disabled

modify name=SSDP state=enabled

modify name=SNMP_AGENT state=disabled

modify name=MDAP state=enabled

modify name=CWMP_client state=disabled

modify name=CWMP_server state=disabled

modify name=PING_RESPONDER state=enabled

mapadd name=HTTP port=www-http

mapadd name=HTTPs port=443

mapadd name=HTTPI intf=LocalNetwork port=www-http

mapadd name=HTTPI intf=LocalNetwork port=1080

mapadd name=HTTPI intf=LocalNetwork port=httpproxy

mapadd name=FTP port=ftp

mapadd name=TELNET port=telnet

mapadd name=DNS-S port=dns

mapadd name=VOIP_SIP port=sip

mapadd name=SSDP port=1900

mapadd name=SNMP_AGENT port=snmp

mapadd name=MDAP port=3235

 

[ language.ini ]

langdef lang=uk charset=ISO8859-1

 

[ endofarch ]

 

 

Mitt spørsmål er nå..hvor setter jeg inn min ISP's oppsett i denne tpl fila?

Kan noen utheve mitt oppsett med rød skrift i det ovenfor??

 

Min ISP's oppsett er fortsatt dette:

 

Name: ISP

Mode: Routing

Encapsulation: Enet Encap

Multiplex: LLC

VPI: 0

VCI: 33

ATM Qos Type: UBR

 

Ingen brukernavn, og passord trengs...

 

Takker

 

Ibanez99

[Ibanez99]

Ingen som vet nå heller??