Problemer med twinview, DPI og lignende

AudunSæther · 23. september 2006

Hepp.

Oppdaterte kjernen og NVIDIA-driveren idag. Har en xorg-conf jeg alltid har brukt siden jeg fikk meg to skjermer, men nå får jeg kun ett skjermbilde.

En bit av Xorg-loggen:

Skjult tekst: (Marker innholdet i feltet for å se teksten):

(II) Setting vga for screen 0.

(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32

(==) NVIDIA(0): RGB weight 888

(==) NVIDIA(0): Default visual is TrueColor

(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)

(**) NVIDIA(0): Option "TwinView" "true"

(**) NVIDIA(0): Option "SecondMonitorHorizSync" "30-65"

(**) NVIDIA(0): Option "SecondMonitorVertRefresh" "50-75"

(**) NVIDIA(0): Option "MetaModes" "1280x1024,1280x1024"

(**) NVIDIA(0): Enabling RENDER acceleration

(**) NVIDIA(0): TwinView enabled

(WW) NVIDIA(0): Unable to read EDID for display device CRT-0

(II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 at PCI:2:1:0

(--) NVIDIA(0): VideoRAM: 131072 kBytes

(--) NVIDIA(0): VideoBIOS: 04.34.20.23.00

(--) NVIDIA(0): Interlaced video modes are supported on this GPU

(--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at PCI:2:1:0:

(--) NVIDIA(0): CRT-0

(--) NVIDIA(0): Samsung SyncMaster (CRT-1)

(--) NVIDIA(0): CRT-0: 350.0 MHz maximum pixel clock

(--) NVIDIA(0): Samsung SyncMaster (CRT-1): 350.0 MHz maximum pixel clock

(II) NVIDIA(0): Assigned Display Devices: CRT-0, CRT-1

(II) NVIDIA(0): Validated modes:

(II) NVIDIA(0): "1280x1024,1280x1024"

(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024

(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI

(WW) NVIDIA(0): from EDID.

Xorg-config:

Skjult tekst: (Marker innholdet i feltet for å se teksten):

# /etc/X11/xorg.conf (xorg X Window System server configuration file)

#

# This file was generated by dexconf, the Debian X Configuration tool, using

# values from the debconf database.

#

# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.

# (Type "man /etc/X11/xorg.conf" at the shell prompt.)

#

# This file is automatically updated on xserver-xorg package upgrades *only*

# if it has not been modified since the last upgrade of the xserver-xorg

# package.

#

# If you have edited this file but would like it to be automatically updated

# again, run the following command:

# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"

FontPath "/usr/share/X11/fonts/misc"

FontPath "/usr/share/X11/fonts/cyrillic"

FontPath "/usr/share/X11/fonts/100dpi/:unscaled"

FontPath "/usr/share/X11/fonts/75dpi/:unscaled"

FontPath "/usr/share/X11/fonts/Type1"

FontPath "/usr/share/X11/fonts/CID"

FontPath "/usr/share/X11/fonts/100dpi"

FontPath "/usr/share/X11/fonts/75dpi"

# paths to defoma fonts

FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"

FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"

EndSection

Section "Module"

Load "GLcore"

Load "i2c"

Load "bitmap"

Load "ddc"

Load "dri"

Load "extmod"

Load "freetype"

Load "glx"

Load "int10"

Load "type1"

Load "vbe"

EndSection

Section "InputDevice"

Identifier "Generic Keyboard"

Driver "kbd"

Option "CoreKeyboard"

Option "XkbRules" "xorg"

Option "XkbModel" "pc104"

Option "XkbLayout" "no"

EndSection

Section "InputDevice"

Identifier "Configured Mouse"

Driver "mouse"

Option "CorePointer"

Option "Device" "/dev/input/mice"

Option "Protocol" "ImPS/2"

Option "Emulate3Buttons" "true"

Option "ZAxisMapping" "4 5"

EndSection

Section "Device"

Identifier "NVIDIA Corporation NV34 [GeForce FX 5200]"

Driver "nvidia"

BusID "PCI:2:1:0"

Option "TwinView" "true"

Option "MetaModes" "1280x1024,1280x1024"

Option "SecondMonitorHorizSync" "30-65"

Option "SecondMonitorVertRefresh" "50-75"

EndSection

Section "Monitor"

Identifier "SyncMaster"

Option "DPMS"

EndSection

Section "Screen"

Identifier "Default Screen"

Device "NVIDIA Corporation NV34 [GeForce FX 5200]"

Monitor "SyncMaster"

DefaultDepth 24

SubSection "Display"

Depth 1