Gå til innhold

Windows Vista™: Informasjon og diskusjon


iMono

Hva tror du SP1 vil gjøre for din installasjon av Windows Vista?  

450 stemmer

  1. 1. Hva tror du SP1 vil gjøre for din installasjon av Windows Vista?

    • Den vil gjøre Vista perfekt.
      29
    • Den vil gjøre Vista bedre, men ikke perfekt.
      243
    • Den vil ikke gjøre noe. Vista er perfekt for meg.
      4
    • Den vil ikke gjøre noe. Vista er ikke noe for meg uansett.
      15
    • Vista vil kanskje bli bedre, men ikke mye.
      90
    • Vista er fortapt - med eller uten oppdateringer.
      70


Anbefalte innlegg

Videoannonse
Annonse
Han sier jo at 2gb funker fint, men vil du oppnå "nirvana" eller hva han sa så er 4gb veien å gå.

 

Har selv 2gb i maskina her og i bærbare og det har funket flott så langt, så 4gb er nok neppe nødvendig, men hadde ikke sagt nei til mer minne, det hadde jeg ikke.

7991632[/snapback]

 

 

Har 1 GB minne i min bærbare ASUS maskin. Vista Ultimate kjører faktisk utrolig bra her. Dreamscene durer og går i bakgrunnen.. masse programmer oppe.. en drøm!

Lenke til kommentar
Lest dette her?

7990136[/snapback]

 

Skjønner ikke det,jeg kjører med 2 x 512 brikker og Vista fungerer lie fint og raskt som xp jeg har på samme maskinen :hmm:

7991619[/snapback]

 

Jeg synes Vista er tregere enn XP, og jeg har 2 GB...

 

AtW

7991646[/snapback]

hva er galt med din pc? :p

jeg har 1,5GB RAM, og pc-en kjører mye raskere i vista enn i xp.

Lenke til kommentar
Lest dette her?

7990136[/snapback]

 

Skjønner ikke det,jeg kjører med 2 x 512 brikker og Vista fungerer lie fint og raskt som xp jeg har på samme maskinen :hmm:

7991619[/snapback]

 

Jeg synes Vista er tregere enn XP, og jeg har 2 GB...

 

AtW

7991646[/snapback]

hva er galt med din pc? :p

jeg har 1,5GB RAM, og pc-en kjører mye raskere i vista enn i xp.

7991819[/snapback]

 

Er det noe galt med PCen min? Spørs jo litt hva man sikter til da, men feks flipping imellom vinduer går tregere med vista, netttrafikk går tregere. Spill går tregere.

 

AtW

Lenke til kommentar
Er det noe galt med PCen min? Spørs jo litt hva man sikter til da, men feks flipping imellom vinduer går tregere med vista, netttrafikk går tregere. Spill går tregere.

 

AtW

 

Da må det være noe som ikke stemmer ATWindsor.

Når det gjelder spillingen..Gjelder det alle spill du har prøvd eller enkelte spill?

Hvilke spill har du prøvd da?

Endret av Scortech
Lenke til kommentar
Er det noe galt med PCen min? Spørs jo litt hva man sikter til da, men feks flipping imellom vinduer går tregere med vista, netttrafikk går tregere. Spill går tregere.

 

AtW

 

Da må det være noe som ikke stemmer ATWindsor.

7991941[/snapback]

 

 

Hvorfor det? Minst to av tingene jeg har opplevd kan man se på benchmarks gjort av seriøse sider også.

 

AtW

Lenke til kommentar

Må si meg enig med ATWindsor her, Vista er betydelig tregere på endel ting. Og suger mye mer ressurser hvertfall..

 

Men en ny Vista install er kanskje raskere enn en eldgammel XP install! :wee:

 

Eneste jeg egentlig merker at Vista er raskere på er oppstart og slikt.

Lenke til kommentar

Jeg har Vista på tre pc'er nå, og føler at Vista er raskere enn XP fra jeg slår på pc'en til jeg kan bruke systemet.

 

På den bærbare kjører jeg dual boot, og det tar faktisk 47 sekunder lengre for XP å starte opp enn Vista. Og XP installasjonen er bare litt over en måned gammel. (tar tiden fra jeg starter opp til alle programmene er lastet og disken har "roetE seg)

Endret av myhken2
Lenke til kommentar
Jeg har Vista på tre pc'er nå, og føler at Vista er raskere enn XP fra jeg slår på pc'en til jeg kan bruke systemet.

 

På den bærbare kjører jeg dual boot, og det tar faktisk 47 sekunder lengre for XP å starte opp enn Vista. Og XP installasjonen er bare litt over en måned gammel. (tar tiden fra jeg starter opp til alle programmene er lastet og disken har "roetE seg)

7992483[/snapback]

 

Har både xp og vista på denne maskinen.

xp bruker 55 sek

Vista bruker 35 sek

Lenke til kommentar

Catalyst 7.2 for Vista 21.02.2007

 

32 bits:

http://www.ngohq.com/home.php?page=Files&g...veme&dwn_id=378

 

64 bits:

http://www.ngohq.com/home.php?page=Files&g...veme&dwn_id=377

 

 

 

 

New Features ( release notes )

 

 

Catalyst™ 7.2 introduces a brand new version of the Catalyst™ Control Center for Windows XP. The new Catalyst™ Control Center delivers a number of significant enhancements:

 

* Significant performance gains; Catalyst™ Control Center start-up time has been substantially reduced, and overall responsiveness has improved.

 

* Reduced system resource usage

 

* New 3D preview which significantly improves the ability for users to understand the benefits of enabling the many Catalyst™ features of their ATI Radeon™ graphics accelerator

 

* Increased stability

 

* Native 32 and 64-bit support

 

Performance Improvements

OpenGL performance improves for all ATI Radeon™ X1000 series products. Gains of up to 25% in Doom 3, 48% in Quake 4 and 21% in Prey can be seen on a variety of ATI Radeon™ X1000 cards. These performance gains are noticed under the Windows Vista operating system.

 

Resolved Issues for the Windows Vista Operating System

This section provides information on resolved issues in this release of the ATI Catalyst™ Software Suite for Windows Vista. These include:

 

* Doom 3: Setting AA to 4x and AT to 8x along with the display resolution to 2560x1600 no longer results in display corruption being noticed. Further details can be found in topic number 737-25520

 

* Corruption is no longer noticed during fast motion of DVD playback when using MCE/WMP. Further details can be found in topic number 737-23550

 

* Catalyst™ Control Center->Display Manager: Connecting only a CRT display device to a system running Windows Vista no longer results in TV display modes being available. Further details can be found in topic number 737-24467

 

* The Microsoft Vista operating system no longer fails to resume from an S3 state on systems containing an ATI Xpress 200 series product. Further details can be found in topic number 737-25506

 

* A flickering display is no longer noticed when playing a DVD using the Windows Media Player in full screen and resuming from a standby state after disconnecting a CRT display device. This issue was known to occur when using a system containing an ATI Xpress 1100/1150 series product. Further details can be found in topic number 737-25507

 

* Catalyst™ Control Center: The Help Launching Dialog is now localized for all supported languages. Further details can be found in topic number 737-25508

 

* Hot plugging or un-plugging a third display device when CrossFire™ is enabled no longer results in the primary display device being swapped and identified as the display device connecting to the primary port on the master card. Further details can be found in topic number 737-25509

 

* Connecting a TV to a system containing an ATI Xpress 200 series and setting it to PAL no longer results in the user not being able to control the display resolution on the LCD display when using the Catalyst™ Control Center. Further details can be found in topic number 737-25511

 

* The Windows Vista software driver for ATI Radeon™ products no longer fails to install if copied to a directory with a long name or to a directory with a long file path location. Further details can be found in topic number 737-25514

 

* Display corruption is no longer noticed when watching TV under the Windows Vista operating system when using an ATI Radeon™ X1600 series product. Further details can be found in topic number 737-25515

 

* The Catalyst™ Control Center no longer fails to launch under the Simplified Chinese version of Windows Vista. Further details can be found in topic number 737-25516

 

* Connecting two display devices with one display device using the HDMI connector (secondary) no longer results in faded colors being noticed on the HDMI display device when swapping (primary and secondary) between the two display devices. Further details can be found in topic number 737-25793

 

* The display mode of 1440X900@75Hz is now available within the Catalyst™ Control Center when using a system containing an ATI Radeon™ X1600/1650 series of product. Further details can be found in topic number 737-25794

 

* Disconnecting the primary display device when the Windows Vista operating system is in a standby state may result in the log-in screen failing to appear when resuming. Further details can be found in topic number 737-24470

 

* Hot-unplugging a secondary CRT display device while the Vista screen saver is active no longer results in corruption being noticed on the LCD display when ending the screen saver activity. Further details can be found in topic number 737-25795

 

* The PowerPlay option is no longer available on systems that do not support the option under the Japanese version of the Windows Vista operating system. Further details can be found in topic number 737-25796

 

* Changing the PowerPlay setting to either Power Saving or High Performance under Windows Vista, followed by rebooting the system no longer results in the PowerPlay setting displaying Battery Life mode regardless of the system being on AC power. Further details can be found in topic number 737-25797

 

Resolved Issues for the Windows XP Operating System

This section provides information on resolved issues in this release of the ATI Catalyst™ Software Suite for Windows XP. These include:

 

* Battlefield 2: Attempting to launch the game under Windows XP with the in-game display setting at 1920x1440 or 2048x1536 and AA set to 6x no longer results in the game failing to launch. Further details can be found in topic number 737-22817

 

* Desperados 2: The game no longer fails to play and display an error in atioglxx.dll when AA is enabled. Further details can be found in topic number 737-25109

 

* Splinter Cell Double Agent: Corruption is no longer noticed when playing the game with AA enabled. Further details can be found in topic number 737-25104

 

* Catalyst™ Control Center->Basic View: Connecting a secondary display device and attempting to enable it, no longer results in the inability to enable the device when using Basic view. Further details can be found in topic number 737-23447

 

* Connecting a CRT as the primary display device and CV as the secondary display device no longer results in the desktop area and refresh rate being reported incorrectly when applying the 1080i30 Optimized mode within the Catalyst™ Control Center. Further details can be found in topic number 737-25174

 

* Enabling CrossFire™ no longer results in display corruption being noticed when playing certain 3D games such as Tiger Woods PGA Tour 2006 and Madden Football. Further details can be found in topic number 737-23006

 

* Catalyst™ Control Center->Basic View: Connecting a secondary display device and attempting to enable it, no longer results in the inability to enable the device when using Basic view. Further details can be found in topic number 737-24347

 

* Catalyst™ Control Center: Connecting an HDTV or DFP display device no longer results in some of the HDTV formats being listed twice in the Catalyst™ Control Center->Digital Panel Properties->HDTV Support. Further details can be found in topic number 737-24349

 

* A blank display no longer occurs when switching the display mode from 1920x1200 60Hz to 1600x1200 60Hz. Further details can be found in topic number 737-25811

 

* The display mode of 1080p is no longer added to mode list and customized list on HDTV where the maximum display mode is 1080i. Further details can be found in topic number 737-25812

 

Known Issues Under the Windows Vista Operating System

This section provides information on known issues associated with the ATI Catalyst™ Vista RTM driver for both the 32bit and 64bit versions of the Microsoft Windows Vista operating system. These include:

 

* Call of Duty: Setting AA to either 2 or 4x may result in display corruption or the Vista operating system failing to respond when using an ATI Radeon™ X800/850 series of product. Further details can be found in topic number 737-25523

 

* Call of Duty->United Offensive: Setting the in game video mode to 2048x1536 may result in display corruption being noticed when playing the game under Windows Vista. Further details can be found in topic number 737-25519

 

* City of Heroes: Changing the display resolution to 2560x1600 or higher may result in the game failing to run. Further details can be found in topic number 737-25518

 

* Doom 3: Attempting to play the game on a system running the Windows Vista operating system and containing an ATI Radeon™ X550/700 series of product may result in the operating system failing to respond. Further details can be found in topic number 737-25513

 

* Doom3/Quake 4: Setting the in game options for Video Quality to Medium and Screen Size to 1024x768 may result in display corruption being noticed when setting AA to 4x. Further details can be found in topic number 737-25802

 

* NBA Live 07: The full animation may not be displayed when launching the game with AA set to 2x or higher. Further details can be found in topic number 737-25803

 

* Never Winter Nights->Shadows of Undertide: Attempting to play the game on a system containing an ATI Radeon™ X800/850 series of product and running the Windows Vista operating system may result in game failing to respond after playing the opening cinematic. Further details can be found in topic number 737-25512

 

* Never Winter Nights->Shadows of Undrentide: Attempting to play the game under the Windows Vista operating system (64bit version) may result in the opening cinematic failing to play when using an LCD display device. Further details can be found in topic number 737-25521

 

* NHL 07: The in-game display settings may fail to be applied when playing the game under the Windows Vista operating system when using a supported ATI Radeon™ product. Further details can be found in topic number 737-23549

 

* Quake 4: game corruption may be noticed when playing the game under the Windows Vista operating system when using an ATI Radeon™ 9800 XT product. Further details can be found in topic number 737-25510

 

* X-Plane: Playing the game under the Windows Vista operating system may result in display corruption being noticed when using an ATI Radeon™ X1900/1950 series of product. Further details can be found in topic number 737-25522

 

* The Force TV option may still be active after deselecting the option and then re-launching the Catalyst™ Control Center. Further details can be found in topic number 737-23547

 

* Playing a DVD under the Windows Vista operating system using the Windows Media Player may result in the DVD failing to play when switching between display devices using the hot-key function. Further details can be found in topic number 737-24472

 

* The Microsoft Vista gamma settings set by the operating system may be overwritten when launching the Catalyst™ Control Center. Further details can be found in topic number 737-25505

 

* Launching the Catalyst™ Control Center after hot-plugging a secondary CRT display device may result in the desktop image reverting to a black and white image requiring a re-installation of the display driver. Further details can be found in topic number 737-25517

 

* OverDrive™ may not function as expected under the Windows Vista operating system when running an OpenGL application. Further details can be found in topic number 737-25524

 

* Resuming from an S3 state may result in a longer than expected time for the Windows Vista operating system to resume. Further details can be found in topic number 737-25798

 

* Connecting a CRT to a system containing an ATI Radeon™ X1200/1250/1300 series of product may result in the Windows Vista operating system may fail to respond when attempting to resume from an S3 state by pressing the power button. Further details can be found in topic number 737-25799

 

* Display corruption may be noticed when clone mode is enabled and the displays are set to either 1280x1024 75/85/100 Hz. or 1400x1050 60Hz. Further details can be found in topic number 737-25800

 

* Hot-plugging a CRT to a system running Windows Vista and containing an ATI Radeon™ X1100/1150 series of product may result in extended desktop mode failing to be applied. Further details can be found in topic number 737-25801

 

* Installing an ATI Radeon™ X800 GT in a system running the Windows Vista 64bit version operating system may result in the WDM driver being unloaded when opening a window or application. Further details can be found in topic number 737-25804

 

Known Issues Under the Windows XP Operating System

The following section provides a summary of open issues in the latest version of Catalyst™. These include:

 

* Starwars Knights of the Old Republic II: The Sith Lords: Setting the in-game display option to low settings may result in corruption being noticed within the game. Further details can be found in topic number 737-25173

 

* Enabling CrossFire™ may result in display corruption being noticed when playing a DVD or media clip using either WinDVD 7, Windows Media Player or PowerDVD 6. Further details can be found in topic number 737-22806

 

* Uninstalling the graphics drivers may result in some of the files and folder failing to be removed in the Program File folder. Further details can be found in topic number 737-23715

 

* Catalyst™ Control Center->OverDrive: The OverDrive setting are not retained for individual accounts. This issue may also be experienced under the Windows Vista operating system. Further details can be found in topic number 737-25805

 

* The response time for the Catalyst™ Control Center may appear slow when attempting to make changes to the display devices when having both a CRT and HDTV connected and extended desktop mode enabled. This issue may also be experienced under the Windows Vista operating system. Further details can be found in topic number 737-25806

 

* Choppy playback of media previews and captured files may be noticed in the media center and movie maker after applying WMP 11 update. This issue may also be experienced under the Windows Vista operating system. Further details can be found in topic number 737-25807

 

* Installing an ATI Radeon™ X1900 CrossFire™ Master and X1900 slave under Windows XP may result in AA settings failing to be retained when rebooting the system. This issue may also be experienced under the Windows Vista operating system. Further details can be found in topic number 737-25808

 

* Hot-plugging an HDMI TV to the DVI port of graphics adapter via HDMI to DVI cable may result in the DVI-to-HDMI detection message appearing but then disappearing within 30 seconds or when making a slight mouse movement. This issue may also be experienced under the Windows Vista operating system. Further details can be found in topic number 737-25809

 

* Extend desktop mode may fail to work after rotating the extended secondary desktop to 90 degrees. This issue may also be experienced under the Windows Vista operating system. Further details can be found in topic number 737-25810

 

 

Endret av syar2003
Lenke til kommentar
Lest dette her?

7990136[/snapback]

 

Skjønner ikke det,jeg kjører med 2 x 512 brikker og Vista fungerer lie fint og raskt som xp jeg har på samme maskinen :hmm:

7991619[/snapback]

 

Jeg synes Vista er tregere enn XP, og jeg har 2 GB...

 

AtW

7991646[/snapback]

 

Putta akkurat inn 4GB minne nå 4x1GB det er en helt annen verden fra 2 til 4. Ikke noe som helst lag som det var tidligere... Kjører forøvrig en E6600 @ 2.9, 4GB ram og 2x74gb raptorer i stripe, samt et 1900XTX.

Det er faktisk en virkelig merkbar forskjell med 4GB minne... (hmm si en ting 2 ganger :roll: hakke kortids hukommelse... :innocent:

Lenke til kommentar

Opprett en konto eller logg inn for å kommentere

Du må være et medlem for å kunne skrive en kommentar

Opprett konto

Det er enkelt å melde seg inn for å starte en ny konto!

Start en konto

Logg inn

Har du allerede en konto? Logg inn her.

Logg inn nå
  • Hvem er aktive   0 medlemmer

    • Ingen innloggede medlemmer aktive
×
×
  • Opprett ny...