Overklokking med på ASUS A8V Deluxe

[kasol]

Hei!

 

Er det noen som har erfraing med å overklokke med dette hovedkortet ASUS A8V Deluxe ?

Siden det er Via KT800pro er det ikke det aller beste til formålet men er det noen som har klart å overklokke cpu litt med dette kortet ?

 

Jeg har

AMD3500+ (gammel)

Vannkjøling

Minne: Corsair XMS PRO3200 DDR-DIMM 1024MB 64Meg x 8, 400MHz, with LED, 3-4-4-8

 

Jeg er en nybegynner men har lest litt om emnet og vet at kortet mangler AGP/PCI lås eller noe slikt og den burde vært låst.

[kasol]

Fant littt:

 

Asus A8V via k8t800pro

 

http://xtremesystems.org/forums/attachment...achmentid=20033

(pic is a rev2.0 board)

 

overclocking options

Bus Speed: 200-300mhz in 1mhz steps

Bus Multiplier: 1x-5x

CPU Multiplier: 4x-20x

AGP speed: default, 66/33, 75/37 http://xtremesystems.org/forums/images/icons/icon4.gif locks dont work on most rev1.xx boards!http://xtremesystems.org/forums/images/icons/icon4.gif

 

overvolting options

Vcore: 0.8-1.80 in 0.025v steps

Vdimm: 2.50-2.80 in 0.1v steps

Vagp: 1.60, 1.70

Vlink: 2.5, 2.6

 

periphals and features

IDE: 3 ATA 133 slots (2 VIA and 1 Promise 20378)

IDE raid: 0,1,0+1,JBOD

SATA: 4 SATA 150 slots (2 VIA VT8237 and 2 Promise 20378)

SATA raid: 0,1,0+1,JBOD

sata+ide drives in raid: no

Firewire: 2 IEEE 1394A ports

LAN: Marvell 88E8001 gigabit ethernet

Sound: realtec ALC850 8 channel

 

links

mainboard homepage: A8V Deluxe (http://usa.asus.com/products/mb/socket939/a8v-d/overview.htm)

forum discussion: The OFFICIAL Asus AV8 tips, tricks and guide thread (http://xtremesystems.org/forums/showthread.php?t=47232)

review #1: Anandtech (http://www.anandtech.com/mb/showdoc.aspx?i=2128&p=1) revision 2.0 review!

review #2: Hexus.net (http://www.hexus.net/content/reviews/review.php?dXJsX3Jldmlld19JRD03OTU=) revision 1.0 review!

review #3: Hardwareluxx (http://www.hardwareluxx.de/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=1&t=000059) (german) revision 1.0 review!

vmod #1: vcore (http://www.xtremesystems.org/forums/showthread.php?t=40378&highlight=a8v)

vmod #2: vdimm (http://www.xtremesystems.org/forums/showthread.php?t=40378&highlight=a8v)

vmod #3: vht (http://) missing

vmod #4: vdd (http://www.xtremesystems.org/forums/showthread.php?t=40378&highlight=a8v)

 

 

pros

locks are working on all rev2.xx boards

stable and high vcore up to 1.85v

good pcb layout

runs great with bh5

runs great with ocz eb

runs great with tccd

2x Memory Interleaving?

 

tracks vtt, ocz booster works up to ~3v

 

cons

http://xtremesystems.org/forums/images/icons/icon4.gif locks not working on most rev1.xx boards!

http://xtremesystems.org/forums/images/icons/icon4.gif generally starts topping out in the 250's htt (bios 1005.021 beta for rev 1.02)

http://xtremesystems.org/forums/images/icons/icon4.gif OVP on VDimm at ~3.15v with a vdimm mod and ~3v with an ocz ddr booster

http://xtremesystems.org/forums/images/icons/icon4.gif

cpu temperature reading not working correctly

 

 

TIPS

TIP: you have to disable cool n quiet when ocing

TIP: disable fast writes

TIP: if you have problems to boot or get your system stable at very low cpu temps try the beta bios 1009.002 or a newer bios version

TIP: bios 1008 might cause prime95 instability, get the latest bios

TIP: you need bios 1007.xx or later to get a winchester 90nm cpu working on this board

TIP: if you have a winchester and your current bios doesnt support it use 1 stick of ram (in slot B1)

then boot from a floppy and flash to 1007 or newer:

1. power down your system

2. Reset cmos

3. boot from a bootable floppy

4. use another floppy with the new bios and the AFUdos.exe program on it

5. type at the A prompt: afudos.exe /ia8v1007.ami

TIP: 1007 seems to give some people problems with the agp/pci locks, use 1008.002 or later

TIP: thermaltake xp120 and corsair xl pro wont fit on this board

TIP: use the promise ide controller when ocing, the via controller is rumored to get unstable when ocing (not locked?)

if you are using the via controller already and want to switch to the promise controller follow this short guide:

1. Copy the PROMISE SATA drivers to a floppy.

2. Turn off your computer and switch your HDD to the PROMISE controller

3. Turn on goto the BIOS ; Advanced > OnBoard Devices Configuration > Onboard Promise Controller [Enabled] > Operating Mode [iDE]

4. In the BIOSchange Boot priority to CD and exit BIOS

5. Pop in your XP CD and press F6 (look carefully for the message at the bottom of the screen)

6. Pop in your Floppy and let XP copy the PROMISE Drivers.

7. Exit install when asked for.

If the above method doesn't work, follow the same steps only let XP repair the existing installation. You should not lose any data.

TIP: you need a fan connected to the cpu fan slot

TIP: if your having stability problems unplug low speed fans, low rpms are rumored to make the board unstable

TIP: if your board has no working locks try to enable them with a hacked bios, works for some boards

TIP: if you have problems booting with one stick try it in slot3 (counting away from the cpu socket)

TIP: bios 1009 beta seems to have coldboot and stability issues above 240fsb (no lock?)

http://xtremesystems.org/forums/attachment...1&stc=1TIP:with BIOS 1009.xxxx BETA if you select 5x HTT (1000) you actually get only 4x once you pass 210 MHz