gentoo og DVD-avspillingsproblemer

[Teh Hoboman]

Jeg sitter med gentoo på en 2.6.9 kjerne, og har litt trøbbel med DVD-avspilling.

Først tenkte jeg at det sikkert er det vanlige med at DMA ikke er skrudd på, men:

hdparm -d /dev/dvd gir meg:

/dev/dvd:
using_dma    =  1 (on)

 

Hmm. Ok, problemet ligger ikke der. Dette er en laptop med et intel-grafikkchipset, så jeg tenkte kanskje driverne til dem var ødelagt\ikke tilstede.

xvinfo | grep -i adaptor:

 Adaptor #0: "Intel(R) 830M/845G/852GM/855GM/865G/915G Video Overlay"

 

Dette ser jo også normalt ut for meg, får også ca. 200 fps når jeg kjører glxgears.

Noe er dog ikke helt som det skal være, etter en reboot ga "hdparm -tT /dev/dvd" meg en I\O error. Når jeg skriver dmesg i terminalen får jeg dette outputet nå:

l block 352
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 1412
Buffer I/O error on device hdc, logical block 353
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 1416
Buffer I/O error on device hdc, logical block 354
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 1420
Buffer I/O error on device hdc, logical block 355
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 1424
Buffer I/O error on device hdc, logical block 356
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 1428
Buffer I/O error on device hdc, logical block 357
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 1432
Buffer I/O error on device hdc, logical block 358
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 1436
Buffer I/O error on device hdc, logical block 359
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 1440
Buffer I/O error on device hdc, logical block 360
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 1444
Buffer I/O error on device hdc, logical block 361
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 1448
Buffer I/O error on device hdc, logical block 362
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 1452

 

 

Kan jo også nevne at gmplayer låste hele pcen når jeg satte videodriver til OpenGL.

outputet som gjelder VGa når jeg skriver kommandoen lspci:

0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)

 

Hjelp? DVD-avspilling er litt viktig for meg å få til her nå, og alt virker jo tilsynelatende greit, det er bare noe med grafikken som sliter et sted. Tror jeg da.

[Gronz]

Hvilke problemer har du egentlig med DVD-avspilling..?

Endret 2. februar 2005 av Gimper

[Teh Hoboman]

Uhm. Det glemte jeg jo =(

DVDavspilling hakker. Eller, den hakket. For jeg rebootet nå, og da virket alt. Helt automagisk. Pussige greier.