3com Trådløst nettverk

[Lisa_Nilsen]

Hei !

Vi har fått oss ny 3com trådløs ruter som skal erstatte det gamle. Problemet er at vi ikke får slettet det gamle software/nettverket til den gamle ruteren. dermed kan vi ikke installere det nye. Noen som vet hvordan man kan uinstallere/slette det ?

[frozen_cpu]

For at noen skal kunne svare på spørsmålet ditt, må du spesifisere problemet ditt litt mer... Du må i hvertfall fortelle hvilket merke det er på den gamle routeren.

[Lisa_Nilsen]

trodde det ikke hadde noe å si :S

[Lisa_Nilsen]

Den gamle heter 3crwe554g72, og den nye heter 3crwe554g72t

[sofTest]

Hvis jeg forstår deg riktig, så vil du reset'e/nullstille routeren til fabrikkinstillinger. I manualen står det:

1 Remove power from the Gateway.

2 Disconnect all your computers and the cable/DSL modem from the Gateway.

3 Using a straight through Ethernet cable, connect the Ethernet Cable/DSL port on the rear of the Gateway to any one of the LAN ports.

4 Re-apply power to the Gateway. The Alert LED will flash as the Gateway starts up, and after approximately 30 seconds will start to flash more slowly (typically 2 seconds on, 2 seconds off). Once the Alert LED has started to flash slowly, remove power from the Gateway.

5 Remove the cable connecting the Cable/DSL port to the LAN port, and reconnect one of your computers to one of the Gateway LAN ports.

6 Re-apply power to the Gateway, and when the start-up sequence has completed, browse to:

http://192.168.1.1

and run the configuration wizard. You may need to restart your computer before you attempt this.

7 When the configuration wizard has completed, you may reconnect your network as it was before.

Endret 15. november 2004 av sofTest