Firewire-disk, men hvor er den?

[qemilo]

Har en firewire disk som jeg ikke "vet hvor er", og klarer derfor ikke mounte den. Jeg hadde trodd den skulle ligge på sdb jeg da, siden sda er opptatt til en usb pen, men dengang ei. Antar det er en commando for å se forskjellige mountbare disker?

Kanskje et gui program som også kan mounte dem?

 

Om dmesg kan hjelpe, så er den sånn som dette:

 

TCP: Hash tables configured (established 32768 bind 32768)

Linux IP multicast router 0.06 plus PIM-SM

RAMDISK: cramfs filesystem found at block 0

RAMDISK: Loading 3832 blocks [1 disk] into ram disk... done.

Freeing initrd memory: 3832k freed

VFS: Mounted root (cramfs filesystem).

Freeing unused kernel memory: 100k freed

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

ide: late registration of driver.

SIS5513: IDE controller at PCI slot 00:02.5

SIS5513: chipset revision 0

SIS5513: not 100% native mode: will probe irqs later

SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller

ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio

ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA

hda: ST380023A, ATA DISK drive

blk: queue e08273a0, I/O limit 4095Mb (mask 0xffffffff)

hdc: MSI CD-RW MS-8348, ATAPI CD/DVD-ROM drive

hdd: ATAPI DVD-ROM 16XMax, ATAPI CD/DVD-ROM drive

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

ide1 at 0x170-0x177,0x376 on irq 15

hda: attached ide-disk driver.

hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100)

Partition check:

/dev/ide/host0/bus0/target0/lun0: [PTBL] [9729/255/63] p1 p2 p3 p4

Journalled Block Device driver loaded

VFS: Can't find ext3 filesystem on dev ide0(3,2).

VFS: Can't find ext2 filesystem on dev ide0(3,2).

Unable to identify CD-ROM format.

FAT: bogus logical sector size 0

VFS: Can't find a valid FAT filesystem on dev 03:02.

reiserfs: found format "3.6" with standard journal

reiserfs: checking transaction log (device ide0(3,2)) ...

for (ide0(3,2))

ide0(3,2):Using r5 hash to sort names

VFS: Can't find ext3 filesystem on dev ide0(3,2).

VFS: Can't find ext2 filesystem on dev ide0(3,2).

Unable to identify CD-ROM format.

FAT: bogus logical sector size 0

VFS: Can't find a valid FAT filesystem on dev 03:02.

reiserfs: found format "3.6" with standard journal

reiserfs: checking transaction log (device ide0(3,2)) ...

for (ide0(3,2))

ide0(3,2):Using r5 hash to sort names

Adding Swap: 979916k swap-space (priority -1)

SCSI subsystem driver Revision: 1.00

hdc: attached ide-scsi driver.

hdd: attached ide-scsi driver.

scsi0 : SCSI host adapter emulation for IDE ATAPI devices

Vendor: MSI Model: CD-RW MS-8348 Rev: 150D

Type: CD-ROM ANSI SCSI revision: 02

Vendor: ATAPI Model: DVD-ROM 16XMax Rev: 1.00

Type: CD-ROM ANSI SCSI revision: 02

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

Consumer PCM code does not work well at the moment --jk

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

usb-ohci.c: USB OHCI at membase 0xe0a6b000, IRQ 9

usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [siS] USB 1.0 Controller

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

hub.c: 2 ports detected

usb-ohci.c: USB OHCI at membase 0xe0a6d000, IRQ 9

usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [siS] USB 1.0 Controller (#2)

usb.c: new USB bus registered, assigned bus number 2

hub.c: USB hub found

hub.c: 2 ports detected

usb-ohci.c: USB OHCI at membase 0xe0a6f000, IRQ 9

usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [siS] USB 1.0 Controller (#3)

usb.c: new USB bus registered, assigned bus number 3

hub.c: USB hub found

hub.c: 2 ports detected

8139too Fast Ethernet driver 0.9.26

eth0: RealTek RTL8139 at 0x8000, 00:10:a7:13:10:b5, IRQ 11

eth0: Identified 8139 chip type 'RTL-8139C'

hub.c: new USB device 00:03.1-1, assigned address 2

usb.c: USB device 2 (vend/prod 0xd7d/0x100) is not claimed by any active driver.NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004

8139cp: 10/100 PCI Ethernet driver v1.1 (Aug 30, 2003)

ohci1394: $Rev: 1045 $ Ben Collins <[email protected]>

ohci1394_0: Unexpected PCI resource length of 1000!

ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[e3800000-e38007ff] Max Packet=[2048]

ehci_hcd 00:03.3: Silicon Integrated Systems [siS] USB 2.0 Controller

ehci_hcd 00:03.3: irq 9, pci mem e0f18000

usb.c: new USB bus registered, assigned bus number 4

PCI: cache line size of 128 is not supported by device 00:03.3

ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4

hub.c: USB hub found

hub.c: 6 ports detected

usb.c: USB disconnect on device 00:03.1-1 address 2

ieee1394: ConfigROM quadlet transaction error for node 0-00:1023

ieee1394: Host added: ID:BUS[0-01:1023] GUID[00004c0107003661]

hub.c: new USB device 00:03.1-1, assigned address 3

usb.c: USB device 3 (vend/prod 0xd7d/0x100) is not claimed by any active driver.eth0: link up, 100Mbps, full-duplex, lpa 0x41E1

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

scsi1 : SCSI emulation for USB Mass Storage devices

Vendor: Model: USB DISK Rev: 2.08

Type: Direct-Access ANSI SCSI revision: 02

Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0

SCSI device sda: 128000 512-byte hdwr sectors (66 MB)

sda: Write Protect is on

/dev/scsi/host1/bus0/target0/lun0: p1 p2 p3 p4

WARNING: USB Mass Storage data integrity not assured

USB Mass Storage device found at 3

USB Mass Storage support registered.

Linux agpgart interface v0.99 © Jeff Hartmann

agpgart: Maximum main memory to use for agp memory: 439M

agpgart: Detected SiS 648 chipset

agpgart: AGP aperture is 64M @ 0xe8000000

NVRM: AGPGART: unable to set MTRR write-combining

NVRM: not using NVAGP, AGPGART is loaded!!

NVRM: AGPGART: unable to set MTRR write-combining

NVRM: not using NVAGP, AGPGART is loaded!!

[qemilo]

Pinlig, tror ikke Firewiredisken var på når jeg kjørte dmesg sist Men Jeg ble da ikke klokere av den nye dmesg'en

 

Freeing initrd memory: 3832k freed

VFS: Mounted root (cramfs filesystem).

Freeing unused kernel memory: 100k freed

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

ide: late registration of driver.

SIS5513: IDE controller at PCI slot 00:02.5

SIS5513: chipset revision 0

SIS5513: not 100% native mode: will probe irqs later

SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller

ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio

ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA

hda: ST380023A, ATA DISK drive

blk: queue e08273a0, I/O limit 4095Mb (mask 0xffffffff)

hdc: MSI CD-RW MS-8348, ATAPI CD/DVD-ROM drive

hdd: ATAPI DVD-ROM 16XMax, ATAPI CD/DVD-ROM drive

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

ide1 at 0x170-0x177,0x376 on irq 15

hda: attached ide-disk driver.

hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100)

Partition check:

/dev/ide/host0/bus0/target0/lun0: [PTBL] [9729/255/63] p1 p2 p3 p4

Journalled Block Device driver loaded

VFS: Can't find ext3 filesystem on dev ide0(3,2).

VFS: Can't find ext2 filesystem on dev ide0(3,2).

Unable to identify CD-ROM format.

FAT: bogus logical sector size 0

VFS: Can't find a valid FAT filesystem on dev 03:02.

reiserfs: found format "3.6" with standard journal

reiserfs: checking transaction log (device ide0(3,2)) ...

for (ide0(3,2))

ide0(3,2):Using r5 hash to sort names

VFS: Can't find ext3 filesystem on dev ide0(3,2).

VFS: Can't find ext2 filesystem on dev ide0(3,2).

Unable to identify CD-ROM format.

FAT: bogus logical sector size 0

VFS: Can't find a valid FAT filesystem on dev 03:02.

reiserfs: found format "3.6" with standard journal

reiserfs: checking transaction log (device ide0(3,2)) ...

for (ide0(3,2))

ide0(3,2):Using r5 hash to sort names

Adding Swap: 979916k swap-space (priority -1)

SCSI subsystem driver Revision: 1.00

hdc: attached ide-scsi driver.

hdd: attached ide-scsi driver.

scsi0 : SCSI host adapter emulation for IDE ATAPI devices

Vendor: MSI Model: CD-RW MS-8348 Rev: 150D

Type: CD-ROM ANSI SCSI revision: 02

Vendor: ATAPI Model: DVD-ROM 16XMax Rev: 1.00

Type: CD-ROM ANSI SCSI revision: 02

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

Consumer PCM code does not work well at the moment --jk

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

usb-ohci.c: USB OHCI at membase 0xe0a6b000, IRQ 9

usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [siS] USB 1.0 Controller

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

hub.c: 2 ports detected

usb-ohci.c: USB OHCI at membase 0xe0a6d000, IRQ 9

usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [siS] USB 1.0 Controller (#2)

usb.c: new USB bus registered, assigned bus number 2

hub.c: USB hub found

hub.c: 2 ports detected

usb-ohci.c: USB OHCI at membase 0xe0a6f000, IRQ 9

usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [siS] USB 1.0 Controller (#3)

usb.c: new USB bus registered, assigned bus number 3

hub.c: USB hub found

hub.c: 2 ports detected

8139too Fast Ethernet driver 0.9.26

eth0: RealTek RTL8139 at 0x8000, 00:10:a7:13:10:b5, IRQ 11

eth0: Identified 8139 chip type 'RTL-8139C'

hub.c: new USB device 00:03.1-1, assigned address 2

usb.c: USB device 2 (vend/prod 0xd7d/0x100) is not claimed by any active driver.NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004

8139cp: 10/100 PCI Ethernet driver v1.1 (Aug 30, 2003)

ohci1394: $Rev: 1045 $ Ben Collins <[email protected]>

ohci1394_0: Unexpected PCI resource length of 1000!

ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[e3800000-e38007ff] Max Packet=[2048]

ehci_hcd 00:03.3: Silicon Integrated Systems [siS] USB 2.0 Controller

ehci_hcd 00:03.3: irq 9, pci mem e0f18000

usb.c: new USB bus registered, assigned bus number 4

PCI: cache line size of 128 is not supported by device 00:03.3

ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4

hub.c: USB hub found

hub.c: 6 ports detected

ieee1394: Node added: ID:BUS[0-00:1023] GUID[0010b920008a1625]

ieee1394: Host added: ID:BUS[0-01:1023] GUID[00004c0107003661]

usb.c: USB disconnect on device 00:03.1-1 address 2

sbp2: $Rev: 1074 $ Ben Collins <[email protected]>

scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices

hub.c: new USB device 00:03.1-1, assigned address 3

usb.c: USB device 3 (vend/prod 0xd7d/0x100) is not claimed by any active driver.ieee1394: sbp2: Logged into SBP-2 device

ieee1394: sbp2: Node 0-00:1023: Max speed [s400] - Max payload [2048]

eth0: link up, 100Mbps, full-duplex, lpa 0x41E1

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

scsi2 : SCSI emulation for USB Mass Storage devices

Vendor: Model: USB DISK Rev: 2.08

Type: Direct-Access ANSI SCSI revision: 02

Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0

SCSI device sda: 128000 512-byte hdwr sectors (66 MB)

sda: Write Protect is on

/dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 p4

WARNING: USB Mass Storage data integrity not assured

USB Mass Storage device found at 3

USB Mass Storage support registered.

Linux agpgart interface v0.99 © Jeff Hartmann

agpgart: Maximum main memory to use for agp memory: 439M

agpgart: Detected SiS 648 chipset

agpgart: AGP aperture is 64M @ 0xe8000000

NVRM: AGPGART: unable to set MTRR write-combining

NVRM: not using NVAGP, AGPGART is loaded!!

NVRM: AGPGART: unable to set MTRR write-combining

NVRM: not using NVAGP, AGPGART is loaded!!

[objorkum]

Om USB pennen er på /dev/sda1 er vel den kanskje på /dev/sda2?

[zyp]

Prøv dette: fdisk -l

[mysjkin]

Åpne en terminal (som root) og skriv

 

tail -f /var/log/messages

 

og koble så disken til. Da bør du se om det skjer noe og forhåpentligvis få et hint om hvor den havner.

 

Drep tail'en med Ctrl-C når du ikke trenger den mer.

 

Dersom det ikke kommer noe i messages når du plugger, kan det være værdt å ta en tilsvarende titt på /var/log/kernel*, evt ta en ls -l /var/log for å se om det skjer noe med noen av filene der. Dersom det ikke skjer noe, tyder det på at du mangler noe drivere for fw.

 

Lykke til!

 

M.

[qemilo]

Objorkum: Nei Usb penen er mountet fra /dev/sda, den har ikke flere partisjoner, tror det er derfor det ikke er noe nummer etter.

 

Zyp: fdisk -l ga ingen tilbakemelding og havnet tilbake til kommandolinjen.

 

 

Mysjkin: Her er resultatet fra tail -f /var/log/messages:

Nov  4 08:27:21 Oda ieee1394.agent[1279]: ... no drivers for IEEE1394 product 0x000000/0x0010b9/0xceb001
Nov  4 08:27:22 Oda kernel: ieee1394: sbp2: Logged into SBP-2 device
Nov  4 08:27:22 Oda ieee1394.agent[1289]:      sbp2: already loaded

 

Så, ingen drivere for profuktet, nyttig. Fant nettopp et verktøy som heter gscanbus. Kjørte den og fikk:

This probably means that you don't have raw1394 support in the kernel or that
you haven't loaded the raw1394 module.

 

Kjørte som root modprobe raw1394, og så gscanbus, fant firewire-disken

Så gjenstår å finne hvor den befinner seg, som desverre ikke scanbus kunne si meg, prøvde /dev/sdb1, men var ikke valid blockdevice. Noen som har råd?

Må også finne ut av hvor jeg putter den modulen så den loader ved oppstart, kjører Demudi, som er en "Debian Sarge (testing) for musikere".

 

Takker for hjelp, føler jeg er nesten i mål, men nesten er ikke helt godt nok her.

[gspr]

Nov  4 08:27:22 Oda kernel: ieee1394: sbp2: Logged into SBP-2 device

Nov  4 08:27:22 Oda ieee1394.agent[1289]:      sbp2: already loaded

Er det kanskje en dev som heter sbp2? Snålt navn, men...

[qemilo]

Nei, desverre

[mysjkin]

Er disken formatert? Hvis du har brukt den på windoes er det sannsynligvis fat-filsystem, har du tatt med swich for det på mount? Hvis den ikke er formatert, kan du jo prøve med en fdisk /dev/sdb, jeg trodde også den skulle dukke opp som en SCSI-disk.

 

Må også finne ut av hvor jeg putter den modulen så den loader ved oppstart, kjører Demudi, som er en "Debian Sarge (testing) for musikere".

 

se på /etc/modules (eller noe slikt, en fil i /etc som heter noe med module) når du ser kommentarene i toppen på den, vet du at det er den riktige.

 

Forresten, jeg driver også å kikker litt på Demundi, hadde en del trøbbel med drop-outs ved opptak (arecord fra et m-audio 2496) med demundis 2.4.2x-multimedia kjerne, gikk uten problemer da jeg oppdaterte til en 'stock' debian 2.6.8 (men så er maskinen jeg bruker ikke av de raskeste....)

 

M.

[qemilo]

Den er formatert til fat32 og prøver å mounte den med -t vfat. Forøvrig to partisjoner på den.

 

se på /etc/modules (eller noe slikt, en fil i /etc som heter noe med module) når du ser kommentarene i toppen på den, vet du at det er den riktige. wink.gif

 

Putta den i /etc/modules jeg. Takker.

 

Angående dropouts ved opptak. Har ikke prøvd opptak enda, så kan vel si lite om det. Men flott å vite at en oppdatering av kjerne kan fikse det. Har lekt meg litt med Hydrogen da, og må si at siste utgave er veldig imponerende.

[qemilo]

Kjørte tail -f /var/log/messages, igjen, og koblet til Firewire, fikk:

 

Nov 4 09:56:07 Oda ieee1394.agent[1554]: ... no drivers for IEEE1394 product 0x000000/0x0010b9/0xceb001

Nov 4 09:56:08 Oda kernel: ieee1394: sbp2: Logged into SBP-2 device

Nov 4 09:56:08 Oda ieee1394.agent[1564]: sbp2: already loaded

 

 

Så det er tydeligvis fortsatt et driverproblem. Sjekket at raw1394 virkelig var loada med lsmod, det var den. Brukte forøvrig samme disken på forrige Linux-system, Vidalinux, der mounta den fint på /dev/sda1 (hadde da ikke usb-pen på /dev/sda).

Endret 4. november 2004 av qemilo

[JBlack]

Så gjenstår å finne hvor den befinner seg, som desverre ikke scanbus kunne si meg, prøvde /dev/sdb1, men var ikke valid blockdevice. Noen som har råd?

fdisk -l som root

[qemilo]

Ingen reaksjon:

Oda:/home/ol# fdisk -l

Oda:/home/ol#

[JBlack]

Ingen reaksjon:

Oda:/home/ol# fdisk -l

Oda:/home/ol#

Veldig merkelig. Du burde få listet opp alle disker og partisjoner. Du kan prøve det samme med: sfdisk -l

[qemilo]

sfdisk ga samme minimale reaksjon. Så ikke vet jeg

[JBlack]

Nei, da veit ikke jeg heller.

 

Edit: /dev/sda1 og /dev/sda2 er ganske normalt. (Om du har extended partition så blir det /dev/sda5 eller høyere)

 

Om du har flere enheter vil de normalt bli /dev/sdb1, /dev/sdc osv.

 

Du må muligens modprobe noen andre moduler også, for eksempel ide-scsi.

Endret 4. november 2004 av JBlack

[qemilo]

Ja, går ut ifra at, når ting er i orden, skal partisjonene på fw-disken dukke opp på henholdsvis sdb1 og sdb2, siden sda er opptatt.

 

I håp om at noen kan se en løsning poster jeg lsmod og dmesg.

 

lsmod:

Module                  Size  Used by    Tainted: P  
snd-seq-midi            3968   0  (autoclean) (unused)
snd-seq-oss            31584   0  (autoclean) (unused)
snd-seq-midi-event      3680   0  (autoclean) [snd-seq-midi snd-seq-oss]
snd-seq                42192   5  (autoclean) [snd-seq-midi snd-seq-oss snd-seq-midi-event]
agpgart                39972   0  (autoclean)
af_packet              13896   1  (autoclean)
usb-storage            59488   0  (unused)
sbp2                   16308   0  (unused)
ehci-hcd               16172   0  (unused)
ohci1394               23024   0  (unused)
nvidia               4588300   6 
8139too                13896   1 
mii                     2096   0  [8139too]
crc32                   2864   0  [8139too]
usb-ohci               17320   0  (unused)
usbcore                56684   1  [usb-storage ehci-hcd usb-ohci]
snd-ice1712            46372   0 
snd-pcm-oss            39784   0  (unused)
snd-mixer-oss          14168   0  [snd-pcm-oss]
snd-pcm                65760   0  [snd-ice1712 snd-pcm-oss]
snd-timer              17092   0  [snd-seq snd-pcm]
snd-ac97-codec         57328   0  [snd-ice1712]
snd-ice17xx-ak4xxx      1520   0  [snd-ice1712]
snd-cs8427              6664   0  [snd-ice1712]
snd-i2c                 2732   0  [snd-ice1712 snd-cs8427]
snd-mpu401-uart         4096   0  [snd-ice1712]
snd-rawmidi            14880   0  [snd-seq-midi snd-mpu401-uart]
snd-seq-device          4340   0  [snd-seq-midi snd-seq-oss snd-seq snd-rawmidi]snd-ak4xxx-adda         3868   0  [snd-ice1712 snd-ice17xx-ak4xxx]
snd                    37284   0  [snd-seq-midi snd-seq-oss snd-seq-midi-event snd-seq snd-ice1712 snd-pcm-oss snd-mixer-oss snd-pcm snd-timer snd-ac97-codec snd-cs8427 snd-i2c snd-mpu401-uart snd-rawmidi snd-seq-device snd-ak4xxx-adda]
snd-page-alloc          5356   0  [snd-seq-oss snd-seq snd-mixer-oss snd-pcm snd-timer snd-i2c snd-rawmidi snd-seq-device snd]
soundcore               3876   8  [snd]
nls_cp437               4316   2  (autoclean)
raw1394                17944   0  (unused)
ieee1394              183556   0  [sbp2 ohci1394 raw1394]
ide-scsi                8656   0 
sd_mod                 10540   0  (unused)
scsi_mod               89312   4  [usb-storage sbp2 ide-scsi sd_mod]
reiserfs              158128   1  (autoclean)
vfat                    9196   1  (autoclean)
fat                    29208   0  (autoclean) [vfat]
isofs                  23480   0  (autoclean)
ext3                   71144   1  (autoclean)
jbd                    40312   1  (autoclean) [ext3]
ide-detect               288   0  (autoclean) (unused)
sis5513                 9968   1  (autoclean)
ide-disk               12704   4  (autoclean)
ide-core               98268   4  (autoclean) [usb-storage ide-scsi ide-detect sis5513 ide-disk]
unix                   16236  34  (autoclean)

 

 

dmesg:

VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 100k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
   ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
   ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST380023A, ATA DISK drive
blk: queue e08273a0, I/O limit 4095Mb (mask 0xffffffff)
hdc: MSI CD-RW MS-8348, ATAPI CD/DVD-ROM drive
hdd: ATAPI DVD-ROM 16XMax, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [9729/255/63] p1 p2 p3 p4
Journalled Block Device driver loaded
VFS: Can't find ext3 filesystem on dev ide0(3,2).
VFS: Can't find ext2 filesystem on dev ide0(3,2).
Unable to identify CD-ROM format.
FAT: bogus logical sector size 0
VFS: Can't find a valid FAT filesystem on dev 03:02.
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,2)) ...
for (ide0(3,2))
ide0(3,2):Using r5 hash to sort names
VFS: Can't find ext3 filesystem on dev ide0(3,2).
VFS: Can't find ext2 filesystem on dev ide0(3,2).
Unable to identify CD-ROM format.
FAT: bogus logical sector size 0
VFS: Can't find a valid FAT filesystem on dev 03:02.
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,2)) ...
for (ide0(3,2))
ide0(3,2):Using r5 hash to sort names
Adding Swap: 979916k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
 Vendor: MSI       Model: CD-RW MS-8348     Rev: 150D
 Type:   CD-ROM                             ANSI SCSI revision: 02
 Vendor: ATAPI     Model: DVD-ROM 16XMax    Rev: 1.00
 Type:   CD-ROM                             ANSI SCSI revision: 02
raw1394: /dev/raw1394 device initialized
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Consumer PCM code does not work well at the moment --jk
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xe0a9f000, IRQ 9
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xe0aa1000, IRQ 9
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xe0aa3000, IRQ 9
usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0x8000, 00:10:a7:13:10:b5, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139C'
hub.c: new USB device 00:03.1-1, assigned address 2
usb.c: USB device 2 (vend/prod 0xd7d/0x100) is not claimed by any active driver.NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-6111  Tue Jul 27 07:55:38 PDT 2004
8139cp: 10/100 PCI Ethernet driver v1.1 (Aug 30, 2003)
ohci1394: $Rev: 1045 $ Ben Collins <[email protected]>
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[e3800000-e38007ff]  Max Packet=[2048]
ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 00:03.3: irq 9, pci mem e0f1e000
usb.c: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 00:03.3
ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
ieee1394: Node added: ID:BUS[0-00:1023]  GUID[0010b920008a1625]
ieee1394: Host added: ID:BUS[0-01:1023]  GUID[00004c0107003661]
usb.c: USB disconnect on device 00:03.1-1 address 2
sbp2: $Rev: 1074 $ Ben Collins <[email protected]>
scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices
hub.c: new USB device 00:03.1-1, assigned address 3
usb.c: USB device 3 (vend/prod 0xd7d/0x100) is not claimed by any active driver.ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi2 : SCSI emulation for USB Mass Storage devices
 Vendor:           Model: USB DISK          Rev: 2.08
 Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
SCSI device sda: 128000 512-byte hdwr sectors (66 MB)
sda: Write Protect is on
/dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 p4
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected SiS 648 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
NVRM: AGPGART: unable to set MTRR write-combining
NVRM: not using NVAGP, AGPGART is loaded!!
NVRM: AGPGART: unable to set MTRR write-combining
NVRM: not using NVAGP, AGPGART is loaded!!

[qemilo]

Det som er kjempe irriterende/oppløftende er jo at gscanbus tydelig finner den da. Forøvrig en Maxtor disk på ca 200 GB.

[objorkum]

Kjørte du "fdisk -l" som root da?

 

"cfdisk" er jo en kommando å teste...

[qemilo]

Ja. Cfdisk finner heller ikke noe på de vanlige stedene; sdb, sdd feks. Har ikke funnet noen tilsvarende "fdisk -l" i cfdisk.