Flashe BIOS Hjelp? fant ikke noen andre poster..

[Per_le]

Flashe BIOS Hjelp? fant ikke noen andre poster..

Jeg har en Epox EP-8rda+ som jeg skal flashe nå..
Hva gjør jeg?
Skal jeg bare laste ned biosen og legge på en disket og restarte pc'en å trykke alt-f2 så gjør pc'en resten eller?? er det noe spesielt med å kkopiere ....bin til floppy eller?

eller kan jeg bruke [url="http://www.epox.com/usa/article.asp?ID=1715&showsupportlinks=YES"]MAGIC BIOS![/url]

Jeg flasha min 9800pro til xt lett.. fulgte etter en guide her på ok..

[_tHokA_]

ALDRI bruk diskket da du skal flashe biosen!

[Moltrez]

Jeg brukte MagicBIOS når jeg flashet min BIOS. Har EpoX hovedkort selv. Funka fint.

[Per_le]

ALDRI bruk diskket da du skal flashe biosen!

hva skjer da??

 

jeg fant en sånn read this på bios greia mi..

 

der sto det..

 

!!!WARNING!!!

Never attempt to Flash your BIOS from a hard disk, DOS Window, DOS

shell, or in Windows NT. If your system is working without problems

or conflicts, then it is not recommended that you flash your BIOS.

Improper flashing procedures may result in a dead system! Follow the

these instructions carefully.

 

The ALT+F2 Method

 

1. Download the required BIOS image file from the EPoX website.

 

2. Copy or extract the BIOS image file (named xxxxxxxx.bin) to a blank

floppy disk with no bad sectors on it.

 

3. Restart the machine with the floppy disk in the floppy drive

When prompted at machine initialization, press ALT+F2 to begin

performing the flashing of the BIOS.

 

4. The BIOS will automatically flash and reboot the machine.

 

5. After this, press DEL to enter the BIOS setup and select to "LOAD

OPTIMIZED DEFAULTS". After doing this select to "SAVE & EXIT."

 

6. Please note that this does not create a backup of the BIOS binary file.

 

7. This does not require you to have a bootable floppy disk.

 

 

Skal flashe nå snart..!!!

[Frodehf]

ALDRI bruk diskket da du skal flashe biosen!

hva skjer da??

 

jeg fant en sånn read this på bios greia mi..

 

der sto det..

 

!!!WARNING!!!

Never attempt to Flash your BIOS from a hard disk, DOS Window, DOS

shell, or in Windows NT. If your system is working without problems

or conflicts, then it is not recommended that you flash your BIOS.

Improper flashing procedures may result in a dead system! Follow the

these instructions carefully.

 

The ALT+F2 Method

 

1. Download the required BIOS image file from the EPoX website.

 

2. Copy or extract the BIOS image file (named xxxxxxxx.bin) to a blank

floppy disk with no bad sectors on it.

 

3. Restart the machine with the floppy disk in the floppy drive

When prompted at machine initialization, press ALT+F2 to begin

performing the flashing of the BIOS.

 

4. The BIOS will automatically flash and reboot the machine.

 

5. After this, press DEL to enter the BIOS setup and select to "LOAD

OPTIMIZED DEFAULTS". After doing this select to "SAVE & EXIT."

 

6. Please note that this does not create a backup of the BIOS binary file.

 

7. This does not require you to have a bootable floppy disk.

 

 

Skal flashe nå snart..!!!

Såg den warningen eg og, flasha biosen med alt-F2 metoden. Funka heilt fint, pc en gjorde alt for meg. Skulle flasha biosen med magic programmet, trur ikkje eg gjorde det rett. Men men, funker ihvertfall fint med alt-F2 metoden.

[Per_le]

Jeg går for magic bios.. orker ikke å sette på disketstasjonen.. krysser fingrene

[Per_le]

Jipppiiiiii funka... lett som bare det.. MAGIC BIOS ruler så hardt!!!