F@H Team "hardware.no" (lagnr: 37651)

[Bobby1]

Er serverene nede igjenn?

Får ivertfall ikkje sendt eller laste ned ny WU

Har vert sånn i heile natt

[-alias-]

Er serverene nede igjenn?

Nei, har ikke registrert noe hos meg, alt går normalt.

[ei57]

Noen som har lagt merke til noen merkelige navn i det siste?

 

Current Work Unit

-----------------

Name: Giving Russians Opium May Alter Current Situation

 

Er nok en spøk som forekommer med forskjellig tekst på p5781-5786. Tar en vekk alle de små bokstavene, ville logfilene sett slik ut:

 

Working on GROMACS (alle andre GPU WU'er "Protein")

 

5781: Working on Great Red Owns Many ACres of Sand

5782: Working on Giving Russians Opium May Alter Current Situation

5783: Working on GROwing Monsters And Cloning Shrimps

5784: Working on Gromacs Runs One Microsecond At Cannonball Speeds

5785: Samme som 5784

5786: Working on GRoups of Organic Molecules in ACtion for Science

[-alias-]

Om PSU og Watt generelt i folding-rigger.

Siste PSU jeg kjøpte (Chieftec Super Series CFT-850) fungerte perfekt i vel en uke før jeg fikk trøbbel med det ene av 2 skjermkort (9800GX2) med gjentatte EUE, og deretter feilet bigadv etter 25 timer. Regner med at det er PSU som feiler, men med et forbruk slik: (2 X 9800X2 = 394W + (i7 920 OC til 4GHz = 198W)) = 592W + 150W (som er resten av riggen) = totalt Watt = 742W skulle 850W være tilstrekkelig. I praksis leste jeg av 786W i toppene fra veggen så teoretisk Watt stemmer kanskje ikke helt i praksis. Burde nok hørt på den som ga rådet om 1000W PSU minimum til dette oppsettet. Løste det ved å la det ene 9800GX2 bytte plass med et GTS250 som bruker 47W mindre enn 9800GX2, og det ser ut til å fungere stabilt igjen. Det rare er at Chieftec Super Series CFT-850 aldri blir varm og heller ikke støyer spesielt.

 

Jeg har en annen rigg med Chieftec Super Series CFT-750 som betjener 4 stk. GTS250 (4x150W) + AMD PHENOM X4 9950 (140W) uten slike problemer. Her har jeg lest av 757 Watt fra veggen på det meste.

Og jeg har enda en rigg med Chieftec Super Series CFT-750 + Intel Core 2 Duo E6850 som nok drar sine 150W OC til 3.4GHz og 2 stk. 9800GX2 med 394W. Totalt blir det 394W + 150W + 150W (riggen) = 694W ved full load. Her leser jeg av max 620W i toppene, så det går begge veier mellom teori og praksis. Begge 750W riggene har vært 100% stabile i mer enn 6 måneder. Erfaringene er nok ganske subjektive for andre, men nøyaktige for meg som egen erfaring. Heretter vil jeg nok regne ut behovet og plusse på 200W før jeg kjøper inn ny PSU.

Endret 16. januar 2010 av -alias-

[Xell]

Husk at det er ikke bare det totale effektforbruket som spiller inn men hvor mye strøm som PSU klarer å gi på de individuelle spenningene. Så det kan hende at den riggen som er litt ustabil rett og slett mangler litt guffe på en spenning. I så måte er det lurt å legge på litt på totaleffekten. Enten det eller sette seg vledig godt inn i hva man trenger på forskjellige spenninger og være helt sikker på at det PSU man kjøper måter krevet.

[Theo343]

Komplett har tilbud på kraftige Chieftec PSUer denne helgen. Bla. 1000W.

 

-alias-

Hvor varmt er chipsettet ditt på X58 kortet? Legg gjerne en viftetermostat under kjølefinnen på den. I tillegg behøver det ikke være total watt som er problemet eller varme på chipsett men ustabil klokk på CPU når du presser systemet hardt.

 

 

Eget rede:

Personlig begynner jeg å bli noe lei bigadv og ustabilitet i hele leveransesystemet deres. Når slikt som dette skjer stadig vekk blir man lei.

 

[12:42:35] Completed 250000 out of 250000 steps  (100%)
[12:42:45] DynamicWrapper: Finished Work Unit: sleep=10000
[12:42:55] 
[12:42:55] Finished Work Unit:
[12:42:55] - Reading up to 52713120 from "work/wudata_00.trr": Read 52713120
[12:42:56] trr file hash check passed.
[12:42:56] - Reading up to 47065500 from "work/wudata_00.xtc": Read 47065500
[12:42:58] xtc file hash check passed.
[12:42:58] edr file hash check passed.
[12:42:58] logfile size: 200461
[12:42:58] Leaving Run
[12:42:58] - Writing 100143997 bytes of core data to disk...
[12:43:04] - Could not write to results file.
[12:43:04] - Error: Could not write out results to file
[12:43:04] - Shutting down core
[12:43:04] 
[12:43:04] Folding@home Core Shutdown: FILE_IO_ERROR
[12:46:20] CoreStatus = 64 (100)
[12:46:20] Unit 0 finished with 60 percent of time to deadline remaining.
[12:46:20] Updated performance fraction: 0.590904
[12:46:20] Sending work to server
[12:46:20] Project: 2681 (Run 11, Clone 16, Gen 49)


[12:46:20] + Attempting to send results [January 16 12:46:20 UTC]
[12:46:20] - Reading file work/wuresults_00.dat from core
[12:46:21]   (Read 98689024 bytes from disk)
[12:46:21] Connecting to http://171.67.108.22:8080/
[13:07:38] Posted data.
[13:07:38] Initial: 0000; - Uploaded at ~75 kB/s
[13:07:38] - Averaged speed for that direction ~65 kB/s
[13:07:38] - Server reports digital signature does not match.
[13:07:38]   (May be due to corruption during network transmission or a corrupted file.)
[13:07:38] - Error: Could not transmit unit 00 (completed January 16) to work server.
[13:07:38] - 1 failed uploads of this unit.
[13:07:38]   Keeping unit 00 in queue.
[13:07:38] Trying to send all finished work units
[13:07:38] Project: 2681 (Run 11, Clone 16, Gen 49)


[13:07:38] + Attempting to send results [January 16 13:07:38 UTC]
[13:07:38] - Reading file work/wuresults_00.dat from core
[13:07:38]   (Read 98689024 bytes from disk)
[13:07:38] Connecting to http://171.67.108.22:8080/
[13:28:50] Posted data.
[13:28:50] Initial: 0000; - Uploaded at ~75 kB/s
[13:28:50] - Averaged speed for that direction ~67 kB/s
[13:28:50] - Server reports digital signature does not match.
[13:28:50]   (May be due to corruption during network transmission or a corrupted file.)
[13:28:50] - Error: Could not transmit unit 00 (completed January 16) to work server.
[13:28:50] - 2 failed uploads of this unit.


[13:28:50] + Attempting to send results [January 16 13:28:50 UTC]
[13:28:50] - Reading file work/wuresults_00.dat from core
[13:28:50]   (Read 98689024 bytes from disk)
[13:28:50] Connecting to http://171.67.108.25:8080/
[13:50:03] Posted data.
[13:50:03] Initial: 0000; - Uploaded at ~75 kB/s
[13:50:03] - Averaged speed for that direction ~69 kB/s
[13:50:03] - Server reports digital signature does not match.
[13:50:03]   (May be due to corruption during network transmission or a corrupted file.)
[13:50:03]   Could not transmit unit 00 to Collection server; keeping in queue.
[13:50:03] Project: 2681 (Run 11, Clone 16, Gen 49)


[13:50:03] + Attempting to send results [January 16 13:50:03 UTC]
[13:50:03] - Reading file work/wuresults_00.dat from core
[13:50:03]   (Read 98689024 bytes from disk)
[13:50:03] Connecting to http://171.67.108.22:8080/
[14:11:09] Posted data.
[14:11:09] Initial: 0000; - Uploaded at ~76 kB/s
[14:11:09] - Averaged speed for that direction ~70 kB/s
[14:11:09] - Server reports digital signature does not match.
[14:11:09]   (May be due to corruption during network transmission or a corrupted file.)
[14:11:09] - Error: Could not transmit unit 00 (completed January 16) to work server.
[14:11:09] - 3 failed uploads of this unit.


[14:11:09] + Attempting to send results [January 16 14:11:09 UTC]
[14:11:09] - Reading file work/wuresults_00.dat from core
[14:11:09]   (Read 98689024 bytes from disk)
[14:11:09] Connecting to http://171.67.108.25:8080/
[14:11:10] - Couldn't send HTTP request to server
[14:11:10]   (Got status 503)
[14:11:10] + Could not connect to Work Server (results)
[14:11:10]	 (171.67.108.25:8080)
[14:11:10] + Retrying using alternative port
[14:11:10] Connecting to http://171.67.108.25:80/
[14:11:11] - Couldn't send HTTP request to server
[14:11:11]   (Got status 503)
[14:11:11] + Could not connect to Work Server (results)
[14:11:11]	 (171.67.108.25:80)
[14:11:11]   Could not transmit unit 00 to Collection server; keeping in queue.
[14:11:11] + Sent 0 of 2 completed units to the server
[14:11:11] - Preparing to get new work unit...
[14:11:11] Cleaning up work directory
[14:11:11] + Attempting to get work packet
[14:11:11] - Will indicate memory of 4540 MB
[14:11:11] - Connecting to assignment server
[14:11:11] Connecting to http://assign.stanford.edu:8080/
[14:11:12] Posted data.
[14:11:12] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:11:12] + News From Folding@Home: Welcome to Folding@Home
[14:11:12] Loaded queue successfully.
[14:11:12] Connecting to http://171.67.108.22:8080/
[14:11:51] Posted data.
[14:11:51] Initial: 0000; - Receiving payload (expected size: 30326708)
[14:12:15] - Downloaded at ~1233 kB/s
[14:12:15] - Averaged speed for that direction ~1201 kB/s
[14:12:15] + Received work.
[14:12:15] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[14:12:20] + Attempting to get work packet
[14:12:20] - Will indicate memory of 4540 MB
[14:12:20] - Connecting to assignment server
[14:12:20] Connecting to http://assign.stanford.edu:8080/
[14:12:21] Posted data.
[14:12:21] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:12:21] + News From Folding@Home: Welcome to Folding@Home
[14:12:21] Loaded queue successfully.
[14:12:21] Connecting to http://171.67.108.22:8080/
[14:12:59] Posted data.
[14:12:59] Initial: 0000; - Receiving payload (expected size: 30333231)
[14:13:25] - Downloaded at ~1139 kB/s
[14:13:25] - Averaged speed for that direction ~1189 kB/s
[14:13:25] + Received work.
[14:13:25] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[14:13:36] + Attempting to get work packet
[14:13:36] - Will indicate memory of 4540 MB
[14:13:36] - Connecting to assignment server
[14:13:36] Connecting to http://assign.stanford.edu:8080/
[14:13:57] - Couldn't send HTTP request to server
[14:13:57] + Could not connect to Assignment Server
[14:13:57] Connecting to http://assign2.stanford.edu:80/
[14:13:59] Posted data.
[14:13:59] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[14:13:59] + News From Folding@Home: Welcome to Folding@Home
[14:13:59] Loaded queue successfully.
[14:13:59] Connecting to http://171.64.65.56:80/
[14:14:05] Posted data.
[14:14:05] Initial: 0000; - Receiving payload (expected size: 4836742)
[14:14:11] - Downloaded at ~787 kB/s
[14:14:11] - Averaged speed for that direction ~1108 kB/s
[14:14:11] + Received work.
[14:14:11] Trying to send all finished work units
[14:14:11] Project: 2681 (Run 11, Clone 16, Gen 49)


[14:14:11] + Attempting to send results [January 16 14:14:11 UTC]
[14:14:11] - Reading file work/wuresults_00.dat from core
[14:14:12]   (Read 98689024 bytes from disk)
[14:14:12] Connecting to http://171.67.108.22:8080/
[14:35:13] Posted data.
[14:35:14] Initial: 0000; - Uploaded at ~76 kB/s
[14:35:14] - Averaged speed for that direction ~71 kB/s
[14:35:14] - Server reports digital signature does not match.
[14:35:14]   (May be due to corruption during network transmission or a corrupted file.)
[14:35:14] - Error: Could not transmit unit 00 (completed January 16) to work server.
[14:35:14] - 4 failed uploads of this unit.


[14:35:14] + Attempting to send results [January 16 14:35:14 UTC]
[14:35:14] - Reading file work/wuresults_00.dat from core
[14:35:14]   (Read 98689024 bytes from disk)
[14:35:14] Connecting to http://171.67.108.25:8080/
[14:56:19] Posted data.
[14:56:19] Initial: 0000; - Uploaded at ~76 kB/s
[14:56:19] - Averaged speed for that direction ~72 kB/s
[14:56:19] - Server reports digital signature does not match.
[14:56:19]   (May be due to corruption during network transmission or a corrupted file.)
[14:56:19]   Could not transmit unit 00 to Collection server; keeping in queue.
[14:56:19] Project: 2681 (Run 11, Clone 16, Gen 49)


[14:56:19] + Attempting to send results [January 16 14:56:19 UTC]
[14:56:19] - Reading file work/wuresults_00.dat from core
[14:56:19]   (Read 98689024 bytes from disk)
[14:56:19] Connecting to http://171.67.108.22:8080/
[15:06:07] - Autosending finished units... [January 16 15:06:07 UTC]
[15:06:07] Trying to send all finished work units
[15:06:07] - Already sending work
[15:06:07] - Already sending work
[15:06:07] + Sent 0 of 2 completed units to the server
[15:06:07] - Autosend completed
[15:17:40] Posted data.
[15:17:40] Initial: 0000; - Uploaded at ~75 kB/s
[15:17:40] - Averaged speed for that direction ~73 kB/s
[15:17:40] - Server reports digital signature does not match.
[15:17:40]   (May be due to corruption during network transmission or a corrupted file.)
[15:17:40] - Error: Could not transmit unit 00 (completed January 16) to work server.
[15:17:40] - 5 failed uploads of this unit.


[15:17:40] + Attempting to send results [January 16 15:17:40 UTC]
[15:17:40] - Reading file work/wuresults_00.dat from core
[15:17:40]   (Read 98689024 bytes from disk)
[15:17:40] Connecting to http://171.67.108.25:8080/
[15:39:25] Posted data.
[15:39:25] Initial: 0000; - Uploaded at ~73 kB/s
[15:39:25] - Averaged speed for that direction ~73 kB/s
[15:39:25] - Server reports digital signature does not match.
[15:39:25]   (May be due to corruption during network transmission or a corrupted file.)
[15:39:25]   Could not transmit unit 00 to Collection server; keeping in queue.
[15:39:25] + Sent 0 of 2 completed units to the server
[15:39:25] + Closed connections
[15:39:25] 
[15:39:25] + Processing work unit
[15:39:25] Core required: FahCore_a2.exe
[15:39:25] Core found.
[15:39:25] Working on queue slot 01 [January 16 15:39:25 UTC]
[15:39:25] + Working ...
[15:39:25] - Calling './mpiexec -np 8 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -nice 19 -suffix 01 -checkpoint 27 -verbose -lifeline 1102 -version 624'

[15:39:26] 
[15:39:27] *------------------------------*
[15:39:27] Folding@Home Gromacs SMP Core
[15:39:27] Version 2.10 (Sun Aug 30 03:43:28 CEST 2009)
[15:39:27] 
[15:39:27] Preparing to commence simulation
[15:39:27] - Ensuring status. Please wait.
[15:39:27] Called DecompressByteArray: compressed_data_size=4836230 data_size=23977273, decompressed_data_size=23977273 diff=0
[15:39:28] - Digital signature verified
[15:39:28] 
[15:39:28] Project: 2669 (Run 2, Clone 100, Gen 122)
[15:39:28] 
[15:39:28] Error: Could not write local file.  Exiting.
[15:39:29] ing M.D.
[15:39:34] g down core
[15:39:34] After shutdown
[15:39:34] Non-master process ending
[15:39:42] CoreStatus = 75 (117)
[15:39:42] Error opening or reading from a file.
[15:39:42] Deleting current work unit & continuing...
[15:39:52] - Warning: Could not delete all work unit files (1): Core file absent
[15:39:52] Trying to send all finished work units
[15:39:52] Project: 2681 (Run 11, Clone 16, Gen 49)


[15:39:52] + Attempting to send results [January 16 15:39:52 UTC]
[15:39:52] - Reading file work/wuresults_00.dat from core
[15:39:52]   (Read 98689024 bytes from disk)
[15:39:52] Connecting to http://171.67.108.22:8080/
[16:01:23] Posted data.
[16:01:23] Initial: 0000; - Uploaded at ~74 kB/s
[16:01:23] - Averaged speed for that direction ~73 kB/s
[16:01:23] - Server reports digital signature does not match.
[16:01:23]   (May be due to corruption during network transmission or a corrupted file.)
[16:01:23] - Error: Could not transmit unit 00 (completed January 16) to work server.
[16:01:23] - 6 failed uploads of this unit.


[16:01:23] + Attempting to send results [January 16 16:01:23 UTC]
[16:01:23] - Reading file work/wuresults_00.dat from core
[16:01:23]   (Read 98689024 bytes from disk)
[16:01:23] Connecting to http://171.67.108.25:8080/
[16:22:33] Posted data.
[16:22:33] Initial: 0000; - Uploaded at ~75 kB/s
[16:22:33] - Averaged speed for that direction ~74 kB/s
[16:22:33] - Server reports digital signature does not match.
[16:22:33]   (May be due to corruption during network transmission or a corrupted file.)
[16:22:33]   Could not transmit unit 00 to Collection server; keeping in queue.
[16:22:33] Project: 2681 (Run 11, Clone 16, Gen 49)


[16:22:33] + Attempting to send results [January 16 16:22:33 UTC]
[16:22:33] - Reading file work/wuresults_00.dat from core
[16:22:33]   (Read 98689024 bytes from disk)
[16:22:33] Connecting to http://171.67.108.22:8080/
[16:43:47] Posted data.
[16:43:47] Initial: 0000; - Uploaded at ~75 kB/s
[16:43:47] - Averaged speed for that direction ~74 kB/s
[16:43:47] - Server reports digital signature does not match.
[16:43:47]   (May be due to corruption during network transmission or a corrupted file.)
[16:43:47] - Error: Could not transmit unit 00 (completed January 16) to work server.
[16:43:47] - 7 failed uploads of this unit.


[16:43:47] + Attempting to send results [January 16 16:43:47 UTC]
[16:43:47] - Reading file work/wuresults_00.dat from core
[16:43:48]   (Read 98689024 bytes from disk)
[16:43:48] Connecting to http://171.67.108.25:8080/
[17:05:35] Posted data.
[17:05:35] Initial: 0000; - Uploaded at ~73 kB/s
[17:05:35] - Averaged speed for that direction ~74 kB/s
[17:05:35] - Server reports digital signature does not match.
[17:05:35]   (May be due to corruption during network transmission or a corrupted file.)
[17:05:35]   Could not transmit unit 00 to Collection server; keeping in queue.
[17:05:35] + Sent 0 of 2 completed units to the server
[17:05:35] - Preparing to get new work unit...
[17:05:35] Cleaning up work directory
[17:05:35] + Attempting to get work packet
[17:05:35] - Will indicate memory of 4540 MB
[17:05:35] - Connecting to assignment server
[17:05:35] Connecting to http://assign.stanford.edu:8080/
[17:05:36] Posted data.
[17:05:36] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[17:05:36] + News From Folding@Home: Welcome to Folding@Home
[17:05:37] Loaded queue successfully.
[17:05:37] Connecting to http://171.67.108.22:8080/
[17:06:16] Posted data.
[17:06:16] Initial: 0000; - Receiving payload (expected size: 30232138)
[17:06:39] - Downloaded at ~1283 kB/s
[17:06:39] - Averaged speed for that direction ~1143 kB/s
[17:06:39] + Received work.
[17:06:39] + Closed connections
[17:06:44] 
[17:06:44] + Processing work unit
[17:06:44] Core required: FahCore_a2.exe
[17:06:44] Core found.
[17:06:44] Working on queue slot 02 [January 16 17:06:44 UTC]
[17:06:44] + Working ...
[17:06:44] - Calling './mpiexec -np 8 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -nice 19 -suffix 02 -checkpoint 27 -verbose -lifeline 1102 -version 624'

[17:06:44] 
[17:06:44] *------------------------------*
[17:06:44] Folding@Home Gromacs SMP Core
[17:06:44] Version 2.10 (Sun Aug 30 03:43:28 CEST 2009)
[17:06:44] 
[17:06:44] Preparing to commence simulation
[17:06:44] - Ensuring status. Please wait.
[17:06:54] - Looking at optimizations...
[17:06:56] - Working with standard loops on this execution.
[17:06:58] - Files status OK
[17:07:08] - Expanded 30231626 -> 159270593 (decompressed 100.6 percent)
[17:07:14] Called DecompressByteArray: compressed_data_size=30231626 data_size=159270593, decompressed_data_size=159270593 diff=0
[17:07:15] - Digital signature verified
[17:07:15] 
[17:07:15] Project: 2683 (Run 2, Clone 14, Gen 33)
[17:07:15] 
[17:07:15] Error: Could not write local file.  Exiting.
[17:07:20] - Shutting down core
[17:07:20] After shutdown
[17:07:21] Non-master process ending
[17:07:29] CoreStatus = 75 (117)
[17:07:29] Error opening or reading from a file.
[17:07:29] Deleting current work unit & continuing...
[17:07:38] - Warning: Could not delete all work unit files (2): Core file absent
[17:07:38] Trying to send all finished work units
[17:07:38] Project: 2681 (Run 11, Clone 16, Gen 49)


[17:07:39] + Attempting to send results [January 16 17:07:39 UTC]
[17:07:39] - Reading file work/wuresults_00.dat from core
[17:07:39]   (Read 98689024 bytes from disk)
[17:07:39] Connecting to http://171.67.108.22:8080/
[17:28:57] Posted data.
[17:28:57] Initial: 0000; - Uploaded at ~75 kB/s
[17:28:57] - Averaged speed for that direction ~74 kB/s
[17:28:57] - Server reports digital signature does not match.
[17:28:57]   (May be due to corruption during network transmission or a corrupted file.)
[17:28:57] - Error: Could not transmit unit 00 (completed January 16) to work server.
[17:28:57] - 8 failed uploads of this unit.


[17:28:57] + Attempting to send results [January 16 17:28:57 UTC]
[17:28:57] - Reading file work/wuresults_00.dat from core
[17:28:57]   (Read 98689024 bytes from disk)
[17:28:57] Connecting to http://171.67.108.25:8080/
[17:50:18] Posted data.
[17:50:18] Initial: 0000; - Uploaded at ~75 kB/s
[17:50:18] - Averaged speed for that direction ~74 kB/s
[17:50:18] - Server reports digital signature does not match.
[17:50:18]   (May be due to corruption during network transmission or a corrupted file.)
[17:50:18]   Could not transmit unit 00 to Collection server; keeping in queue.
[17:50:18] Project: 2681 (Run 11, Clone 16, Gen 49)


[17:50:18] + Attempting to send results [January 16 17:50:18 UTC]
[17:50:18] - Reading file work/wuresults_00.dat from core
[17:50:18]   (Read 98689024 bytes from disk)
[17:50:18] Connecting to http://171.67.108.22:8080/
[18:11:30] Posted data.
[18:11:30] Initial: 0000; - Uploaded at ~75 kB/s
[18:11:30] - Averaged speed for that direction ~74 kB/s
[18:11:30] - Server reports digital signature does not match.
[18:11:30]   (May be due to corruption during network transmission or a corrupted file.)
[18:11:30] - Error: Could not transmit unit 00 (completed January 16) to work server.
[18:11:30] - 9 failed uploads of this unit.


[18:11:30] + Attempting to send results [January 16 18:11:30 UTC]
[18:11:30] - Reading file work/wuresults_00.dat from core
[18:11:30]   (Read 98689024 bytes from disk)
[18:11:30] Connecting to http://171.67.108.25:8080/
[18:32:58] Posted data.
[18:32:58] Initial: 0000; - Uploaded at ~74 kB/s
[18:32:58] - Averaged speed for that direction ~74 kB/s
[18:32:58] - Server reports digital signature does not match.
[18:32:58]   (May be due to corruption during network transmission or a corrupted file.)
[18:32:58]   Could not transmit unit 00 to Collection server; keeping in queue.
[18:32:58] + Sent 0 of 2 completed units to the server
[18:32:58] - Preparing to get new work unit...
[18:32:58] Cleaning up work directory
[18:32:59] + Attempting to get work packet
[18:32:59] - Will indicate memory of 4540 MB
[18:32:59] - Connecting to assignment server
[18:32:59] Connecting to http://assign.stanford.edu:8080/
[18:33:00] Posted data.
[18:33:00] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[18:33:00] + News From Folding@Home: Welcome to Folding@Home
[18:33:00] Loaded queue successfully.
[18:33:00] Connecting to http://171.67.108.22:8080/
[18:33:21] - Couldn't send HTTP request to server
[18:33:21] + Could not connect to Work Server
[18:33:21] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[18:33:31] + Attempting to get work packet
[18:33:31] - Will indicate memory of 4540 MB
[18:33:31] - Connecting to assignment server
[18:33:31] Connecting to http://assign.stanford.edu:8080/
[18:33:32] Posted data.
[18:33:32] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[18:33:32] + News From Folding@Home: Welcome to Folding@Home
[18:33:33] Loaded queue successfully.
[18:33:33] Connecting to http://171.67.108.22:8080/
[18:34:11] Posted data.
[18:34:11] Initial: 0000; - Receiving payload (expected size: 30236983)
[18:34:34] - Downloaded at ~1283 kB/s
[18:34:34] - Averaged speed for that direction ~1171 kB/s
[18:34:34] + Received work.
[18:34:34] + Closed connections
[18:34:39] 
[18:34:39] + Processing work unit
[18:34:39] Core required: FahCore_a2.exe
[18:34:39] Core found.
[18:34:39] Working on queue slot 03 [January 16 18:34:39 UTC]
[18:34:39] + Working ...
[18:34:39] - Calling './mpiexec -np 8 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -nice 19 -suffix 03 -checkpoint 27 -verbose -lifeline 1102 -version 624'

[18:34:40] 
[18:34:40] *------------------------------*
[18:34:40] Folding@Home Gromacs SMP Core
[18:34:40] Version 2.10 (Sun Aug 30 03:43:28 CEST 2009)
[18:34:40] 
[18:34:40] Preparing to commence simulation
[18:34:40] - Ensuring status. Please wait.
[18:34:49] - Looking at optimizations...
[18:34:53] - Working with standard loops on this execution.
[18:34:56] - Files status OK
[18:35:04] - Expanded 30236471 -> 159270593 (decompressed 100.6 percent)
[18:35:10] Called DecompressByteArray: compressed_data_size=30236471 data_size=159270593, decompressed_data_size=159270593 diff=0
[18:35:11] - Digital signature verified
[18:35:11] 
[18:35:11] Project: 2683 (Run 5, Clone 6, Gen 36)
[18:35:11] 
[18:35:11] Error: Could not write local file.  Exiting.
[18:35:16] - Shutting down core
[18:35:16] After shutdown
[18:35:16] Non-master process ending
[18:35:25] CoreStatus = 75 (117)
[18:35:25] Error opening or reading from a file.
[18:35:25] Deleting current work unit & continuing...
[18:35:35] - Warning: Could not delete all work unit files (3): Core file absent
[18:35:35] Trying to send all finished work units
[18:35:35] Project: 2681 (Run 11, Clone 16, Gen 49)


[18:35:35] + Attempting to send results [January 16 18:35:35 UTC]
[18:35:35] - Reading file work/wuresults_00.dat from core
[18:35:35]   (Read 98689024 bytes from disk)
[18:35:35] Connecting to http://171.67.108.22:8080/
[18:57:48] Posted data.
[18:57:48] Initial: 0000; - Uploaded at ~72 kB/s
[18:57:48] - Averaged speed for that direction ~74 kB/s
[18:57:48] - Server reports digital signature does not match.
[18:57:48]   (May be due to corruption during network transmission or a corrupted file.)
[18:57:48] - Error: Could not transmit unit 00 (completed January 16) to work server.
[18:57:48] - 10 failed uploads of this unit.


[18:57:48] + Attempting to send results [January 16 18:57:48 UTC]
[18:57:48] - Reading file work/wuresults_00.dat from core
[18:57:48]   (Read 98689024 bytes from disk)
[18:57:48] Connecting to http://171.67.108.25:8080/
[19:19:04] Posted data.
[19:19:04] Initial: 0000; - Uploaded at ~75 kB/s
[19:19:04] - Averaged speed for that direction ~74 kB/s
[19:19:04] - Server reports digital signature does not match.
[19:19:04]   (May be due to corruption during network transmission or a corrupted file.)
[19:19:04]   Could not transmit unit 00 to Collection server; keeping in queue.
[19:19:04] Project: 2681 (Run 11, Clone 16, Gen 49)


[19:19:04] + Attempting to send results [January 16 19:19:04 UTC]
[19:19:04] - Reading file work/wuresults_00.dat from core
[19:19:04]   (Read 98689024 bytes from disk)
[19:19:04] Connecting to http://171.67.108.22:8080/
[19:19:25] - Couldn't send HTTP request to server
[19:19:25] + Could not connect to Work Server (results)
[19:19:25]	 (171.67.108.22:8080)
[19:19:25] + Retrying using alternative port
[19:19:25] Connecting to http://171.67.108.22:80/
[19:19:25] - Couldn't send HTTP request to server
[19:19:25] + Could not connect to Work Server (results)
[19:19:25]	 (171.67.108.22:80)
[19:19:25] - Error: Could not transmit unit 00 (completed January 16) to work server.
[19:19:25] - 11 failed uploads of this unit.


[19:19:25] + Attempting to send results [January 16 19:19:25 UTC]
[19:19:25] - Reading file work/wuresults_00.dat from core
[19:19:25]   (Read 98689024 bytes from disk)
[19:19:25] Connecting to http://171.67.108.25:8080/
[19:41:05] Posted data.
[19:41:05] Initial: 0000; - Uploaded at ~74 kB/s
[19:41:05] - Averaged speed for that direction ~74 kB/s
[19:41:05] - Server reports digital signature does not match.
[19:41:05]   (May be due to corruption during network transmission or a corrupted file.)
[19:41:05]   Could not transmit unit 00 to Collection server; keeping in queue.
[19:41:05] + Sent 0 of 2 completed units to the server
[19:41:05] - Preparing to get new work unit...
[19:41:05] Cleaning up work directory
[19:41:05] + Attempting to get work packet
[19:41:05] - Will indicate memory of 4540 MB
[19:41:05] - Connecting to assignment server
[19:41:05] Connecting to http://assign.stanford.edu:8080/
[19:41:07] Posted data.
[19:41:07] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[19:41:07] + News From Folding@Home: Welcome to Folding@Home
[19:41:07] Loaded queue successfully.
[19:41:07] Connecting to http://171.67.108.22:8080/
[19:41:46] Posted data.
[19:41:46] Initial: 0000; - Receiving payload (expected size: 30227024)
[19:42:10] - Downloaded at ~1229 kB/s
[19:42:10] - Averaged speed for that direction ~1183 kB/s
[19:42:10] + Received work.
[19:42:10] + Closed connections
[19:42:15] 
[19:42:15] + Processing work unit
[19:42:15] Core required: FahCore_a2.exe
[19:42:15] Core found.
[19:42:15] Working on queue slot 04 [January 16 19:42:15 UTC]
[19:42:15] + Working ...
[19:42:15] - Calling './mpiexec -np 8 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -nice 19 -suffix 04 -checkpoint 27 -verbose -lifeline 1102 -version 624'

[19:42:15] 
[19:42:15] *------------------------------*
[19:42:15] Folding@Home Gromacs SMP Core
[19:42:15] Version 2.10 (Sun Aug 30 03:43:28 CEST 2009)
[19:42:15] 
[19:42:15] Preparing to commence simulation
[19:42:15] - Ensuring status. Please wait.
[19:42:25] - Looking at optimizations...
[19:42:28] - Working with standard loops on this execution.
[19:42:28] - Files status OK
[19:42:39] - Expanded 30226512 -> 159270593 (decompressed 100.6 percent)
[19:42:44] Called DecompressByteArray: compressed_data_size=30226512 data_size=159270593, decompressed_data_size=159270593 diff=0
[19:42:45] - Digital signature verified
[19:42:45] 
[19:42:45] Project: 2683 (Run 11, Clone 7, Gen 27)
[19:42:45] 
[19:42:45] Error: Could not write local file.  Exiting.
[19:42:50] - Shutting down core
[19:42:50] After shutdown
[19:42:50] Non-master process ending
[19:42:59] CoreStatus = 75 (117)
[19:42:59] Error opening or reading from a file.
[19:42:59] Deleting current work unit & continuing...
[19:43:10] - Warning: Could not delete all work unit files (4): Core file absent
[19:43:10] Trying to send all finished work units
[19:43:10] Project: 2681 (Run 11, Clone 16, Gen 49)


[19:43:10] + Attempting to send results [January 16 19:43:10 UTC]
[19:43:10] - Reading file work/wuresults_00.dat from core
[19:43:10]   (Read 98689024 bytes from disk)
[19:43:10] Connecting to http://171.67.108.22:8080/
[20:04:32] Posted data.
[20:04:32] Initial: 0000; - Uploaded at ~75 kB/s
[20:04:32] - Averaged speed for that direction ~74 kB/s
[20:04:32] - Server reports digital signature does not match.
[20:04:32]   (May be due to corruption during network transmission or a corrupted file.)
[20:04:32] - Error: Could not transmit unit 00 (completed January 16) to work server.
[20:04:32] - 12 failed uploads of this unit.


[20:04:32] + Attempting to send results [January 16 20:04:32 UTC]
[20:04:32] - Reading file work/wuresults_00.dat from core
[20:04:32]   (Read 98689024 bytes from disk)
[20:04:32] Connecting to http://171.67.108.25:8080/
[20:26:06] Posted data.
[20:26:06] Initial: 0000; - Uploaded at ~74 kB/s
[20:26:06] - Averaged speed for that direction ~74 kB/s
[20:26:06] - Server reports digital signature does not match.
[20:26:06]   (May be due to corruption during network transmission or a corrupted file.)
[20:26:06]   Could not transmit unit 00 to Collection server; keeping in queue.
[20:26:06] Project: 2681 (Run 11, Clone 16, Gen 49)


[20:26:06] + Attempting to send results [January 16 20:26:06 UTC]
[20:26:06] - Reading file work/wuresults_00.dat from core
[20:26:07]   (Read 98689024 bytes from disk)
[20:26:07] Connecting to http://171.67.108.22:8080/
[20:47:43] Posted data.
[20:47:43] Initial: 0000; - Uploaded at ~74 kB/s
[20:47:43] - Averaged speed for that direction ~74 kB/s
[20:47:43] - Server reports digital signature does not match.
[20:47:43]   (May be due to corruption during network transmission or a corrupted file.)
[20:47:43] - Error: Could not transmit unit 00 (completed January 16) to work server.
[20:47:43] - 13 failed uploads of this unit.


[20:47:43] + Attempting to send results [January 16 20:47:43 UTC]
[20:47:43] - Reading file work/wuresults_00.dat from core
[20:47:43]   (Read 98689024 bytes from disk)
[20:47:43] Connecting to http://171.67.108.25:8080/
[21:06:07] - Autosending finished units... [January 16 21:06:07 UTC]
[21:06:07] Trying to send all finished work units
[21:06:07] - Already sending work
[21:06:07] - Already sending work
[21:06:07] + Sent 0 of 2 completed units to the server
[21:06:07] - Autosend completed
[21:09:33] Posted data.
[21:09:33] Initial: 0000; - Uploaded at ~73 kB/s
[21:09:33] - Averaged speed for that direction ~74 kB/s
[21:09:33] - Server reports digital signature does not match.
[21:09:33]   (May be due to corruption during network transmission or a corrupted file.)
[21:09:33]   Could not transmit unit 00 to Collection server; keeping in queue.
[21:09:33] + Sent 0 of 2 completed units to the server
[21:09:33] - Preparing to get new work unit...
[21:09:33] Cleaning up work directory
[21:09:34] + Attempting to get work packet
[21:09:34] - Will indicate memory of 4540 MB
[21:09:34] - Connecting to assignment server
[21:09:34] Connecting to http://assign.stanford.edu:8080/
[21:09:35] Posted data.
[21:09:35] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[21:09:35] + News From Folding@Home: Welcome to Folding@Home
[21:09:35] Loaded queue successfully.
[21:09:35] Connecting to http://171.67.108.22:8080/
[21:10:16] Posted data.
[21:10:16] Initial: 0000; - Receiving payload (expected size: 30331643)
[21:10:40] - Downloaded at ~1234 kB/s
[21:10:40] - Averaged speed for that direction ~1193 kB/s
[21:10:40] + Received work.
[21:10:40] + Closed connections
[21:10:45] 
[21:10:45] + Processing work unit
[21:10:45] Core required: FahCore_a2.exe
[21:10:45] Core found.
[21:10:45] Working on queue slot 05 [January 16 21:10:45 UTC]
[21:10:45] + Working ...
[21:10:45] - Calling './mpiexec -np 8 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -nice 19 -suffix 05 -checkpoint 27 -verbose -lifeline 1102 -version 624'

[21:10:45] 
[21:10:45] *------------------------------*
[21:10:45] Folding@Home Gromacs SMP Core
[21:10:45] Version 2.10 (Sun Aug 30 03:43:28 CEST 2009)
[21:10:45] 
[21:10:45] Preparing to commence simulation
[21:10:45] - Ensuring status. Please wait.
[21:10:55] - Looking at optimizations...
[21:10:59] - Working with standard loops on this execution.
[21:11:01] - Files status OK
[21:11:10] - Expanded 30331131 -> 159726549 (decompressed 101.8 percent)
[21:11:15] Called DecompressByteArray: compressed_data_size=30331131 data_size=159726549, decompressed_data_size=159726549 diff=0
[21:11:16] - Digital signature verified
[21:11:16] 
[21:11:16] Project: 2681 (Run 8, Clone 16, Gen 55)
[21:11:16] 
[21:11:17] Error: Could not write local file.  Exiting.
[21:11:22] - Shutting down core
[21:11:22] After shutdown
[21:11:22] Non-master process ending
[21:11:30] CoreStatus = 75 (117)
[21:11:30] Error opening or reading from a file.
[21:11:30] Deleting current work unit & continuing...
[21:11:41] - Warning: Could not delete all work unit files (5): Core file absent
[21:11:41] Trying to send all finished work units
[21:11:41] Project: 2681 (Run 11, Clone 16, Gen 49)


[21:11:41] + Attempting to send results [January 16 21:11:41 UTC]
[21:11:41] - Reading file work/wuresults_00.dat from core
[21:11:42]   (Read 98689024 bytes from disk)
[21:11:42] Connecting to http://171.67.108.22:8080/
[21:33:11] Posted data.
[21:33:11] Initial: 0000; - Uploaded at ~74 kB/s
[21:33:11] - Averaged speed for that direction ~74 kB/s
[21:33:11] - Server reports digital signature does not match.
[21:33:11]   (May be due to corruption during network transmission or a corrupted file.)
[21:33:11] - Error: Could not transmit unit 00 (completed January 16) to work server.
[21:33:11] - 14 failed uploads of this unit.


[21:33:11] + Attempting to send results [January 16 21:33:11 UTC]
[21:33:11] - Reading file work/wuresults_00.dat from core
[21:33:11]   (Read 98689024 bytes from disk)
[21:33:11] Connecting to http://171.67.108.25:8080/
[21:55:07] Posted data.
[21:55:07] Initial: 0000; - Uploaded at ~73 kB/s
[21:55:07] - Averaged speed for that direction ~74 kB/s
[21:55:07] - Server reports digital signature does not match.
[21:55:07]   (May be due to corruption during network transmission or a corrupted file.)
[21:55:07]   Could not transmit unit 00 to Collection server; keeping in queue.
[21:55:07] Project: 2681 (Run 11, Clone 16, Gen 49)


[21:55:07] + Attempting to send results [January 16 21:55:07 UTC]
[21:55:07] - Reading file work/wuresults_00.dat from core
[21:55:07]   (Read 98689024 bytes from disk)
[21:55:07] Connecting to http://171.67.108.22:8080/
[22:16:56] Posted data.
[22:16:56] Initial: 0000; - Uploaded at ~73 kB/s
[22:16:56] - Averaged speed for that direction ~74 kB/s
[22:16:56] - Server reports digital signature does not match.
[22:16:56]   (May be due to corruption during network transmission or a corrupted file.)
[22:16:56] - Error: Could not transmit unit 00 (completed January 16) to work server.
[22:16:56] - 15 failed uploads of this unit.


[22:16:56] + Attempting to send results [January 16 22:16:56 UTC]
[22:16:56] - Reading file work/wuresults_00.dat from core
[22:16:56]   (Read 98689024 bytes from disk)
[22:16:56] Connecting to http://171.67.108.25:8080/
[22:38:57] Posted data.
[22:38:57] Initial: 0000; - Uploaded at ~72 kB/s
[22:38:57] - Averaged speed for that direction ~73 kB/s
[22:38:57] - Server reports digital signature does not match.
[22:38:57]   (May be due to corruption during network transmission or a corrupted file.)
[22:38:57]   Could not transmit unit 00 to Collection server; keeping in queue.
[22:38:57] + Sent 0 of 2 completed units to the server
[22:38:57] - Preparing to get new work unit...
[22:38:57] Cleaning up work directory
[22:38:57] + Attempting to get work packet
[22:38:57] - Will indicate memory of 4540 MB
[22:38:57] - Connecting to assignment server
[22:38:57] Connecting to http://assign.stanford.edu:8080/
[22:38:59] Posted data.
[22:38:59] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[22:38:59] + News From Folding@Home: Welcome to Folding@Home
[22:38:59] Loaded queue successfully.
[22:38:59] Connecting to http://171.67.108.22:8080/
[22:39:37] Posted data.
[22:39:37] Initial: 0000; - Receiving payload (expected size: 30329123)
[22:40:02] - Downloaded at ~1184 kB/s
[22:40:02] - Averaged speed for that direction ~1191 kB/s
[22:40:02] + Received work.
[22:40:02] + Closed connections
[22:40:07] 
[22:40:07] + Processing work unit
[22:40:07] Core required: FahCore_a2.exe
[22:40:07] Core found.
[22:40:07] Working on queue slot 06 [January 16 22:40:07 UTC]
[22:40:07] + Working ...
[22:40:07] - Calling './mpiexec -np 8 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -nice 19 -suffix 06 -checkpoint 27 -verbose -lifeline 1102 -version 624'

[22:40:07] 
[22:40:07] *------------------------------*
[22:40:07] Folding@Home Gromacs SMP Core
[22:40:07] Version 2.10 (Sun Aug 30 03:43:28 CEST 2009)
[22:40:07] 
[22:40:07] Preparing to commence simulation
[22:40:07] - Ensuring status. Please wait.
[22:40:16] - Looking at optimizations...
[22:40:19] - Working with standard loops on this execution.
[22:40:21] - Files status OK
[22:40:32] - Expanded 30328611 -> 159726549 (decompressed 101.8 percent)
[22:40:38] Called DecompressByteArray: compressed_data_size=30328611 data_size=159726549, decompressed_data_size=159726549 diff=0
[22:40:40] - Digital signature verified
[22:40:40] 
[22:40:40] Project: 2681 (Run 9, Clone 0, Gen 53)
[22:40:40] 
[22:40:41] Error: Could not write local file.  Exiting.
[22:40:44] - Shutting down core
[22:40:44] After shutdown
[22:40:45] Non-master process ending
[22:40:53] CoreStatus = 75 (117)
[22:40:53] Error opening or reading from a file.
[22:40:53] Deleting current work unit & continuing...
[22:41:05] - Warning: Could not delete all work unit files (6): Core file absent
[22:41:05] Trying to send all finished work units
[22:41:05] Project: 2681 (Run 11, Clone 16, Gen 49)


[22:41:05] + Attempting to send results [January 16 22:41:05 UTC]
[22:41:05] - Reading file work/wuresults_00.dat from core
[22:41:05]   (Read 98689024 bytes from disk)
[22:41:05] Connecting to http://171.67.108.22:8080/
[23:02:52] Posted data.
[23:02:52] Initial: 0000; - Uploaded at ~73 kB/s
[23:02:52] - Averaged speed for that direction ~73 kB/s
[23:02:52] - Server reports digital signature does not match.
[23:02:52]   (May be due to corruption during network transmission or a corrupted file.)
[23:02:52] - Error: Could not transmit unit 00 (completed January 16) to work server.
[23:02:52] - 16 failed uploads of this unit.


[23:02:52] + Attempting to send results [January 16 23:02:52 UTC]
[23:02:52] - Reading file work/wuresults_00.dat from core
[23:02:52]   (Read 98689024 bytes from disk)
[23:02:52] Connecting to http://171.67.108.25:8080/
[23:27:55] Posted data.
[23:27:55] Initial: 0000; - Uploaded at ~64 kB/s
[23:27:55] - Averaged speed for that direction ~71 kB/s
[23:27:55] - Server reports digital signature does not match.
[23:27:55]   (May be due to corruption during network transmission or a corrupted file.)
[23:27:55]   Could not transmit unit 00 to Collection server; keeping in queue.
[23:27:55] Project: 2681 (Run 11, Clone 16, Gen 49)


[23:27:55] + Attempting to send results [January 16 23:27:55 UTC]
[23:27:55] - Reading file work/wuresults_00.dat from core
[23:27:55]   (Read 98689024 bytes from disk)
[23:27:55] Connecting to http://171.67.108.22:8080/
[23:51:14] Posted data.
[23:51:14] Initial: 0000; - Uploaded at ~68 kB/s
[23:51:14] - Averaged speed for that direction ~71 kB/s
[23:51:14] - Server reports digital signature does not match.
[23:51:14]   (May be due to corruption during network transmission or a corrupted file.)
[23:51:14] - Error: Could not transmit unit 00 (completed January 16) to work server.
[23:51:14] - 17 failed uploads of this unit.


[23:51:14] + Attempting to send results [January 16 23:51:14 UTC]
[23:51:14] - Reading file work/wuresults_00.dat from core
[23:51:14]   (Read 98689024 bytes from disk)
[23:51:14] Connecting to http://171.67.108.25:8080/
[00:12:40] Posted data.
[00:12:40] Initial: 0000; - Uploaded at ~74 kB/s
[00:12:40] - Averaged speed for that direction ~72 kB/s
[00:12:40] - Server reports digital signature does not match.
[00:12:40]   (May be due to corruption during network transmission or a corrupted file.)
[00:12:40]   Could not transmit unit 00 to Collection server; keeping in queue.
[00:12:40] + Sent 0 of 2 completed units to the server
[00:12:40] - Preparing to get new work unit...
[00:12:40] Cleaning up work directory
[00:12:40] + Attempting to get work packet
[00:12:40] - Will indicate memory of 4540 MB
[00:12:40] - Connecting to assignment server
[00:12:40] Connecting to http://assign.stanford.edu:8080/
[00:13:02] - Couldn't send HTTP request to server
[00:13:02] + Could not connect to Assignment Server
[00:13:02] Connecting to http://assign2.stanford.edu:80/
[00:13:03] Posted data.
[00:13:03] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[00:13:03] + News From Folding@Home: Welcome to Folding@Home
[00:13:03] Loaded queue successfully.
[00:13:03] Connecting to http://171.64.65.56:80/
[00:13:11] Posted data.
[00:13:11] Initial: 0000; - Receiving payload (expected size: 4836742)
[00:13:17] - Downloaded at ~787 kB/s
[00:13:17] - Averaged speed for that direction ~1110 kB/s
[00:13:17] + Received work.
[00:13:17] + Closed connections
[00:13:22] 
[00:13:22] + Processing work unit
[00:13:22] Core required: FahCore_a2.exe
[00:13:22] Core found.
[00:13:22] Working on queue slot 07 [January 17 00:13:22 UTC]
[00:13:22] + Working ...
[00:13:22] - Calling './mpiexec -np 8 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -nice 19 -suffix 07 -checkpoint 27 -verbose -lifeline 1102 -version 624'

[00:13:22] 
[00:13:22] *------------------------------*
[00:13:22] Folding@Home Gromacs SMP Core
[00:13:22] Version 2.10 (Sun Aug 30 03:43:28 CEST 2009)
[00:13:22] 
[00:13:22] Preparing to commence simulation
[00:13:22] - Ensuring status. Please wait.
[00:13:32] - Looking at optimizations...
[00:13:33] - Working with standard loops on this execution.
[00:13:33] - Files status OK
[00:13:34] - Expanded 4836230 -> 23977273 (decompressed 495.7 percent)
[00:13:34] Called DecompressByteArray: compressed_data_size=4836230 data_size=23977273, decompressed_data_size=23977273 diff=0
[00:13:35] - Digital signature verified
[00:13:35] 
[00:13:35] Project: 2669 (Run 2, Clone 100, Gen 122)
[00:13:35] 
[00:13:35] Entering M.D.
[00:13:47] Completed 0 out of 250000 steps  (0%)
[00:17:07] Completed 2500 out of 250000 steps  (1%)
[00:20:27] Completed 5000 out of 250000 steps  (2%)
[00:23:46] Completed 7500 out of 250000 steps  (3%)
[00:27:15] Completed 10000 out of 250000 steps  (4%)
[00:30:33] Completed 12500 out of 250000 steps  (5%)
[00:33:53] Completed 15000 out of 250000 steps  (6%)
[00:37:13] Completed 17500 out of 250000 steps  (7%)
[00:40:32] Completed 20000 out of 250000 steps  (8%)
[00:43:53] Completed 22500 out of 250000 steps  (9%)
[00:47:14] Completed 25000 out of 250000 steps  (10%)
[00:50:33] Completed 27500 out of 250000 steps  (11%)
[00:53:53] Completed 30000 out of 250000 steps  (12%)
[00:57:22] Completed 32500 out of 250000 steps  (13%)
[01:00:42] Completed 35000 out of 250000 steps  (14%)
[01:04:02] Completed 37500 out of 250000 steps  (15%)
[01:07:21] Completed 40000 out of 250000 steps  (16%)
[01:10:41] Completed 42500 out of 250000 steps  (17%)
[01:14:03] Completed 45000 out of 250000 steps  (18%)
[01:17:23] Completed 47500 out of 250000 steps  (19%)
[01:20:42] Completed 50000 out of 250000 steps  (20%)
[01:24:03] Completed 52500 out of 250000 steps  (21%)
[01:27:27] Completed 55000 out of 250000 steps  (22%)
[01:30:48] Completed 57500 out of 250000 steps  (23%)
[01:34:09] Completed 60000 out of 250000 steps  (24%)
[01:37:29] Completed 62500 out of 250000 steps  (25%)
[01:40:49] Completed 65000 out of 250000 steps  (26%)
[01:44:16] Completed 67500 out of 250000 steps  (27%)
[01:47:36] Completed 70000 out of 250000 steps  (28%)
[01:50:58] Completed 72500 out of 250000 steps  (29%)
[01:54:18] Completed 75000 out of 250000 steps  (30%)
[01:57:38] Completed 77500 out of 250000 steps  (31%)
[02:01:00] Completed 80000 out of 250000 steps  (32%)
[02:04:23] Completed 82500 out of 250000 steps  (33%)
[02:07:43] Completed 85000 out of 250000 steps  (34%)
[02:11:04] Completed 87500 out of 250000 steps  (35%)
[02:14:34] Completed 90000 out of 250000 steps  (36%)
[02:17:54] Completed 92500 out of 250000 steps  (37%)
[02:21:09] Completed 95000 out of 250000 steps  (38%)
[02:24:23] Completed 97500 out of 250000 steps  (39%)
[02:27:45] Completed 100000 out of 250000 steps  (40%)
[02:30:58] Completed 102500 out of 250000 steps  (41%)
[02:34:11] Completed 105000 out of 250000 steps  (42%)
[02:37:24] Completed 107500 out of 250000 steps  (43%)
[02:40:37] Completed 110000 out of 250000 steps  (44%)
[02:43:59] Completed 112500 out of 250000 steps  (45%)
[02:47:12] Completed 115000 out of 250000 steps  (46%)
[02:50:24] Completed 117500 out of 250000 steps  (47%)
[02:53:37] Completed 120000 out of 250000 steps  (48%)
[02:56:51] Completed 122500 out of 250000 steps  (49%)
[03:00:09] Completed 125000 out of 250000 steps  (50%)
[03:03:24] Completed 127500 out of 250000 steps  (51%)
[03:06:07] - Autosending finished units... [January 17 03:06:07 UTC]
[03:06:07] Trying to send all finished work units
[03:06:07] Project: 2681 (Run 11, Clone 16, Gen 49)


[03:06:07] + Attempting to send results [January 17 03:06:07 UTC]
[03:06:07] - Reading file work/wuresults_00.dat from core
[03:06:09]   (Read 98689024 bytes from disk)
[03:06:09] Connecting to http://171.67.108.22:8080/
[03:06:39] Completed 130000 out of 250000 steps  (52%)
[03:09:52] Completed 132500 out of 250000 steps  (53%)
[03:13:15] Completed 135000 out of 250000 steps  (54%)
[03:16:28] Completed 137500 out of 250000 steps  (55%)
[03:19:42] Completed 140000 out of 250000 steps  (56%)
[03:22:56] Completed 142500 out of 250000 steps  (57%)
[03:26:10] Completed 145000 out of 250000 steps  (58%)
[03:28:11] Posted data.
[03:28:11] Initial: 0000; - Uploaded at ~72 kB/s
[03:28:11] - Averaged speed for that direction ~72 kB/s
[03:28:11] - Server reports digital signature does not match.
[03:28:11]   (May be due to corruption during network transmission or a corrupted file.)
[03:28:11] - Error: Could not transmit unit 00 (completed January 16) to work server.
[03:28:11] - 18 failed uploads of this unit.


[03:28:11] + Attempting to send results [January 17 03:28:11 UTC]
[03:28:11] - Reading file work/wuresults_00.dat from core
[03:28:12]   (Read 98689024 bytes from disk)
[03:28:12] Connecting to http://171.67.108.25:8080/
[03:29:32] Completed 147500 out of 250000 steps  (59%)
[03:32:45] Completed 150000 out of 250000 steps  (60%)
[03:36:01] Completed 152500 out of 250000 steps  (61%)
[03:39:14] Completed 155000 out of 250000 steps  (62%)
[03:42:28] Completed 157500 out of 250000 steps  (63%)
[03:45:42] Completed 160000 out of 250000 steps  (64%)
[03:48:57] Completed 162500 out of 250000 steps  (65%)
[03:50:49] Posted data.
[03:50:50] Initial: 0000; - Uploaded at ~70 kB/s
[03:50:50] - Averaged speed for that direction ~71 kB/s
[03:50:50] - Server reports digital signature does not match.
[03:50:50]   (May be due to corruption during network transmission or a corrupted file.)
[03:50:50]   Could not transmit unit 00 to Collection server; keeping in queue.
[03:50:50] Project: 2681 (Run 11, Clone 16, Gen 49)


[03:50:50] + Attempting to send results [January 17 03:50:50 UTC]
[03:50:50] - Reading file work/wuresults_00.dat from core
[03:50:50]   (Read 98689024 bytes from disk)
[03:50:50] Connecting to http://171.67.108.22:8080/
[03:52:18] Completed 165000 out of 250000 steps  (66%)
[03:55:40] Completed 167500 out of 250000 steps  (67%)
[03:59:02] Completed 170000 out of 250000 steps  (68%)
[04:02:24] Completed 172500 out of 250000 steps  (69%)
[04:05:47] Completed 175000 out of 250000 steps  (70%)
[04:09:08] Completed 177500 out of 250000 steps  (71%)
[04:12:29] Completed 180000 out of 250000 steps  (72%)
[04:14:04] Posted data.
[04:14:05] Initial: 0000; - Uploaded at ~69 kB/s
[04:14:05] - Averaged speed for that direction ~71 kB/s
[04:14:05] - Server reports digital signature does not match.
[04:14:05]   (May be due to corruption during network transmission or a corrupted file.)
[04:14:05] - Error: Could not transmit unit 00 (completed January 16) to work server.
[04:14:05] - 19 failed uploads of this unit.


[04:14:05] + Attempting to send results [January 17 04:14:05 UTC]
[04:14:05] - Reading file work/wuresults_00.dat from core
[04:14:05]   (Read 98689024 bytes from disk)
[04:14:05] Connecting to http://171.67.108.25:8080/
[04:15:51] Completed 182500 out of 250000 steps  (73%)
[04:19:15] Completed 185000 out of 250000 steps  (74%)
[04:22:36] Completed 187500 out of 250000 steps  (75%)
[04:25:59] Completed 190000 out of 250000 steps  (76%)
[04:29:31] Completed 192500 out of 250000 steps  (77%)
[04:32:54] Completed 195000 out of 250000 steps  (78%)
[04:36:16] Completed 197500 out of 250000 steps  (79%)
[04:36:41] Posted data.
[04:36:42] Initial: 0000; - Uploaded at ~71 kB/s
[04:36:42] - Averaged speed for that direction ~71 kB/s
[04:36:42] - Server reports digital signature does not match.
[04:36:42]   (May be due to corruption during network transmission or a corrupted file.)
[04:36:42]   Could not transmit unit 00 to Collection server; keeping in queue.
[04:36:42] + Sent 0 of 2 completed units to the server
[04:36:42] - Autosend completed
[04:39:38] Completed 200000 out of 250000 steps  (80%)
[04:43:01] Completed 202500 out of 250000 steps  (81%)
[04:46:23] Completed 205000 out of 250000 steps  (82%)
[04:49:44] Completed 207500 out of 250000 steps  (83%)
[04:53:06] Completed 210000 out of 250000 steps  (84%)
[04:56:29] Completed 212500 out of 250000 steps  (85%)
[04:59:52] Completed 215000 out of 250000 steps  (86%)
[05:03:14] Completed 217500 out of 250000 steps  (87%)
[05:06:37] Completed 220000 out of 250000 steps  (88%)
[05:09:58] Completed 222500 out of 250000 steps  (89%)
[05:13:22] Completed 225000 out of 250000 steps  (90%)
[05:16:44] Completed 227500 out of 250000 steps  (91%)
[05:20:07] Completed 230000 out of 250000 steps  (92%)
[05:23:29] Completed 232500 out of 250000 steps  (93%)
[05:26:58] Completed 235000 out of 250000 steps  (94%)
[05:30:28] Completed 237500 out of 250000 steps  (95%)
[05:33:52] Completed 240000 out of 250000 steps  (96%)
[05:37:11] Completed 242500 out of 250000 steps  (97%)
[05:40:33] Completed 245000 out of 250000 steps  (98%)
[05:43:55] Completed 247500 out of 250000 steps  (99%)
[05:47:16] Completed 250000 out of 250000 steps  (100%)
[05:47:17] DynamicWrapper: Finished Work Unit: sleep=10000
[05:47:27] 
[05:47:27] Finished Work Unit:
[05:47:27] - Reading up to 21124224 from "work/wudata_07.trr": Read 21124224
[05:47:27] trr file hash check passed.
[05:47:27] - Reading up to 4500812 from "work/wudata_07.xtc": Read 4500812
[05:47:27] xtc file hash check passed.
[05:47:27] edr file hash check passed.
[05:47:27] logfile size: 183882
[05:47:27] Leaving Run
[05:47:31] - Writing 25958702 bytes of core data to disk...
[05:47:32]   ... Done.
[05:47:37] - Shutting down core
[05:47:37] 
[05:47:37] Folding@home Core Shutdown: FINISHED_UNIT
[05:50:51] CoreStatus = 64 (100)
[05:50:51] Unit 7 finished with 92 percent of time to deadline remaining.
[05:50:51] Updated performance fraction: 0.657095
[05:50:51] Sending work to server
[05:50:51] Project: 2669 (Run 2, Clone 100, Gen 122)


[05:50:52] + Attempting to send results [January 17 05:50:52 UTC]
[05:50:52] - Reading file work/wuresults_07.dat from core
[05:50:52]   (Read 25958702 bytes from disk)
[05:50:52] Connecting to http://171.64.65.56:80/
[05:57:09] Posted data.
[05:57:09] Initial: 0000; - Uploaded at ~65 kB/s
[05:57:19] - Averaged speed for that direction ~70 kB/s
[05:57:19] + Results successfully sent
[05:57:19] Thank you for your contribution to Folding@Home.
[05:57:20] + Number of Units Completed: 94

[05:57:20] - Warning: Could not delete all work unit files (7): Core file absent
[05:57:20] Trying to send all finished work units
[05:57:20] Project: 2681 (Run 11, Clone 16, Gen 49)


[05:57:20] + Attempting to send results [January 17 05:57:20 UTC]
[05:57:20] - Reading file work/wuresults_00.dat from core
[05:57:24]   (Read 98689024 bytes from disk)
[05:57:24] Connecting to http://171.67.108.22:8080/
[06:11:50] Posted data.
[06:11:50] Initial: 683C; + Could not connect to Work Server (results)
[06:11:50]	 (171.67.108.22:8080)
[06:11:50] + Retrying using alternative port
[06:11:50] Connecting to http://171.67.108.22:80/
[06:11:50] - Couldn't send HTTP request to server
[06:11:50] + Could not connect to Work Server (results)
[06:11:50]	 (171.67.108.22:80)
[06:11:50] - Error: Could not transmit unit 00 (completed January 16) to work server.
[06:11:50] - 20 failed uploads of this unit.


[06:11:50] + Attempting to send results [January 17 06:11:50 UTC]
[06:11:50] - Reading file work/wuresults_00.dat from core
[06:11:51]   (Read 98689024 bytes from disk)
[06:11:51] Connecting to http://171.67.108.25:8080/
[06:20:20] - Couldn't send HTTP request to server
[06:20:20] + Could not connect to Work Server (results)
[06:20:20]	 (171.67.108.25:8080)
[06:20:20] + Retrying using alternative port
[06:20:20] Connecting to http://171.67.108.25:80/
[06:42:24] Posted data.
[06:42:24] Initial: 0000; - Server reports digital signature does not match.
[06:42:24]   (May be due to corruption during network transmission or a corrupted file.)
[06:42:24]   Could not transmit unit 00 to Collection server; keeping in queue.
[06:42:24] Project: 2681 (Run 11, Clone 16, Gen 49)


[06:42:24] + Attempting to send results [January 17 06:42:24 UTC]
[06:42:24] - Reading file work/wuresults_00.dat from core
[06:42:26]   (Read 98689024 bytes from disk)
[06:42:26] Connecting to http://171.67.108.22:8080/
[07:04:19] Posted data.
[07:04:19] Initial: 0000; - Uploaded at ~73 kB/s
[07:04:20] - Averaged speed for that direction ~70 kB/s
[07:04:20] - Server reports digital signature does not match.
[07:04:20]   (May be due to corruption during network transmission or a corrupted file.)
[07:04:20] - Error: Could not transmit unit 00 (completed January 16) to work server.
[07:04:20] - 21 failed uploads of this unit.


[07:04:20] + Attempting to send results [January 17 07:04:20 UTC]
[07:04:20] - Reading file work/wuresults_00.dat from core
[07:04:21]   (Read 98689024 bytes from disk)
[07:04:21] Connecting to http://171.67.108.25:8080/
[07:26:53] Posted data.
[07:26:54] Initial: 0000; - Uploaded at ~71 kB/s
[07:26:54] - Averaged speed for that direction ~70 kB/s
[07:26:54] - Server reports digital signature does not match.
[07:26:54]   (May be due to corruption during network transmission or a corrupted file.)
[07:26:54]   Could not transmit unit 00 to Collection server; keeping in queue.
[07:26:54] + Sent 0 of 2 completed units to the server
[07:26:54] - Preparing to get new work unit...
[07:26:54] Cleaning up work directory
[07:26:54] + Attempting to get work packet
[07:26:54] - Will indicate memory of 4540 MB
[07:26:54] - Connecting to assignment server
[07:26:54] Connecting to http://assign.stanford.edu:8080/
[07:26:56] Posted data.
[07:26:56] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[07:26:56] + News From Folding@Home: Welcome to Folding@Home
[07:26:56] Loaded queue successfully.
[07:26:56] Connecting to http://171.67.108.22:8080/
[07:27:33] Posted data.
[07:27:33] Initial: 0000; - Receiving payload (expected size: 30323089)
[07:27:58] - Downloaded at ~1233 kB/s
[07:27:58] - Averaged speed for that direction ~1135 kB/s
[07:27:58] + Received work.
[07:27:58] Trying to send all finished work units
[07:27:58] Project: 2681 (Run 11, Clone 16, Gen 49)


[07:27:58] + Attempting to send results [January 17 07:27:58 UTC]
[07:27:58] - Reading file work/wuresults_00.dat from core
[07:28:00]   (Read 98689024 bytes from disk)
[07:28:00] Connecting to http://171.67.108.22:8080/
[07:51:11] Posted data.
[07:51:12] Initial: 0000; - Uploaded at ~69 kB/s
[07:51:12] - Averaged speed for that direction ~70 kB/s
[07:51:12] - Server reports digital signature does not match.
[07:51:12]   (May be due to corruption during network transmission or a corrupted file.)
[07:51:12] - Error: Could not transmit unit 00 (completed January 16) to work server.
[07:51:12] - 22 failed uploads of this unit.


[07:51:12] + Attempting to send results [January 17 07:51:12 UTC]
[07:51:12] - Reading file work/wuresults_00.dat from core
[07:51:13]   (Read 98689024 bytes from disk)
[07:51:13] Connecting to http://171.67.108.25:8080/
[08:13:50] Posted data.
[08:13:51] Initial: 0000; - Uploaded at ~70 kB/s
[08:13:51] - Averaged speed for that direction ~70 kB/s
[08:13:51] - Server reports digital signature does not match.
[08:13:51]   (May be due to corruption during network transmission or a corrupted file.)
[08:13:51]   Could not transmit unit 00 to Collection server; keeping in queue.
[08:13:51] Project: 2681 (Run 11, Clone 16, Gen 49)


[08:13:51] + Attempting to send results [January 17 08:13:51 UTC]
[08:13:51] - Reading file work/wuresults_00.dat from core
[08:13:52]   (Read 98689024 bytes from disk)
[08:13:52] Connecting to http://171.67.108.22:8080/
[08:35:42] Posted data.
[08:35:43] Initial: 0000; - Uploaded at ~73 kB/s
[08:35:43] - Averaged speed for that direction ~71 kB/s
[08:35:43] - Server reports digital signature does not match.
[08:35:43]   (May be due to corruption during network transmission or a corrupted file.)
[08:35:43] - Error: Could not transmit unit 00 (completed January 16) to work server.
[08:35:43] - 23 failed uploads of this unit.


[08:35:43] + Attempting to send results [January 17 08:35:43 UTC]
[08:35:43] - Reading file work/wuresults_00.dat from core
[08:35:44]   (Read 98689024 bytes from disk)
[08:35:44] Connecting to http://171.67.108.25:8080/
[08:59:38] Posted data.
[08:59:38] Initial: 0000; - Uploaded at ~67 kB/s
[08:59:38] - Averaged speed for that direction ~70 kB/s
[08:59:38] - Server reports digital signature does not match.
[08:59:38]   (May be due to corruption during network transmission or a corrupted file.)
[08:59:38]   Could not transmit unit 00 to Collection server; keeping in queue.
[08:59:38] + Sent 0 of 2 completed units to the server
[08:59:38] + Closed connections
[08:59:38] 
[08:59:38] + Processing work unit
[08:59:38] Core required: FahCore_a2.exe
[08:59:38] Core found.
[08:59:38] Working on queue slot 08 [January 17 08:59:38 UTC]
[08:59:38] + Working ...
[08:59:38] - Calling './mpiexec -np 8 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -nice 19 -suffix 08 -checkpoint 27 -verbose -lifeline 1102 -version 624'

[08:59:38] 
[08:59:39] *------------------------------*
[08:59:39] Folding@Home Gromacs SMP Core
[08:59:39] Version 2.10 (Sun Aug 30 03:43:28 CEST 2009)
[08:59:39] 
[08:59:39] Preparing to commence simulation
[08:59:39] - Ensuring status. Please wait- Files status OK
[08:59:47] - Expanded 30322577 -> 159726549 (decompressed 101.8 percent)
[08:59:48] 
[08:59:54] - Files status OK
[08:59:56] teArray: compressed_data_size=30322577 data_size=159726549, decompressed_data_size=159726549 diff=0
[08:59:57] - Digital signature verified
[08:59:58] 
[08:59:58] Project: 2681 (Run 16, Clone 5, Gen 26)
[08:59:59] 
[09:00:06] 49 diff=0
[09:00:07] ptimizations on if available.
[09:00:07] Entering M.D.
[09:00:08] (Run 16, Clone 5, Gen 26)
[09:00:08] 
[09:00:08] Entering M.D.
[09:00:38] Completed 0 out of 250000 steps  (0%)
[09:00:48] CoreStatus = FF (255)
[09:00:48] Sending work to server
[09:00:48] Project: 2681 (Run 16, Clone 5, Gen 26)
[09:00:48] - Error: Could not get length of results file work/wuresults_08.dat
[09:00:48] - Error: Could not read unit 08 file. Removing from queue.
[09:00:48] Trying to send all finished work units
[09:00:48] Project: 2681 (Run 11, Clone 16, Gen 49)


[09:00:48] + Attempting to send results [January 17 09:00:48 UTC]
[09:00:48] - Reading file work/wuresults_00.dat from core
[09:00:48]   (Read 98689024 bytes from disk)
[09:00:48] Connecting to http://171.67.108.22:8080/

 

 

Edit:

Jeg har annonsert på foldingforum at jeg er møkka lei og slutter med bigadv.

 

Edit2:

Generelt skaper også folding@home så mye unødvendig frustrasjon, arbeid og tidstyveri at jeg vurderer sterkere enn noensinne å bruke energien på helt andre ting. Ikke la mitt frafall la andre miste motet, men om noen melder seg frivillig til å ta over førstepost får jeg wheelman til å fikse den biten.

 

Det var i grunn godt å komme til denne konklusjonen før jeg begynte å legge ennå mer krefter i de planlagte foldingriggene.

Endret 17. januar 2010 av Theo343

[Kjetil Lura]

Theo343:

Håper du ikke slutter med GPU foldingen. Kjør smp og gpu. Det er ikke mye arbeid. Tok en omstart på maskinene mine i dag, de hadde da en oppe tid på 23dager(Winup)

Det er og derfor jeg ikke kjører smp + gpu. Kjører kun gpu. Mye varme, mye problemer?

[Lidskjalv]

Keep it simple. Jeg har kun ett kort i drift, og min bror ett. Og vi gleder oss kostelig hver gang vi greier å slå vår egen PPD en sjelden gang

[-alias-]

Det var i grunn godt å komme til denne konklusjonen før jeg begynte å legge ennå mer krefter i de planlagte foldingriggene.

Du må ikke slutte helt, trappe ned litt ja, men ikke slutte. Og du gjør du en fantastisk jobb med førsteposten som er blitt helt unik. Dessuten innehar du en kompetanse på folding som ikke mange har, nei du må ikke slutte her.

 

Jeg hadde også et brudd i bigadvèn i dag, men fikk startet den igjen. I går hadde jeg 2 brudd, så det bør ikke komme flere hvis den skal bli ferdig innen fristen. Tror det kan ha sammenheng med at CPU OC til 4GHz under full load trekker mer strøm enn +5V linja kan gi. Bør kanskje klokke den ned en par hundre MHz slik at den får nok strøm. Bruker utregningen (130W / 2667) * 4000 = 195W for å komme fram til strømforbruket på CPU. Hva annet i maskinen trekker strøm over +3.3V og +5V linja som samlet er på 200W max? 1000W fra Chieftec er nøyaktig lik på den linja så det vil ikke hjelpe å bytte PSU heller. http://www.chieftec.eu/index.php?option=co...&Itemid=558

Endret 17. januar 2010 av -alias-

[Theo343]

Neida, ok, slutter nok ikke helt og takk for dytten hehe.

 

Du må regne hvertfall 200W eller mer på CPUen din. Husk at folding gi mer last enn vanlig hard CPU benching som mange review sites bruker. Det jeg leser mange skriver er rundt 258W for 4GHz på full load med HT enabled (8 tråder).

http://forums.extremeoverclocking.com/show...ad.php?t=317916

Endret 17. januar 2010 av Theo343

[-alias-]

Det jeg leser mange skriver om er rundt 258W for 4GHz på full load.

Jeg begynner å frykte for det, og da er det få PSUer som holder i lengden til dette råkjøret. Etter siste brudd har jeg stoppet GPU-folding på denne riggen som nå drar 430W fra veggen med bare folding på bigadv. I tillegg tok jeg ut ett skjermkort slik det nå bare står det ene igjen i maskinen for å se om jeg klarer å berge denne WUen. Jeg må tenke litt på hva det blir til videre, har jo lite lyst til å ødelegge den nye maskinen på grunn av bigadv-foldingen.

[Theo343]

jeg fant en bedre graf:

http://www.tomshardware.com/reviews/overcl...i7,2268-10.html

Hva den trekker på idle er vanskelig å si, men den går da på speedstep og 12x.

 

Samt litt annet:

The i7 utilizes more than just the 12v for the cpu now. The vtt and cpu pll are run from the 3.3 volt line and dram is run from the 5 volt line and all of them traverse the cpu, even the vdimm affects the cpu from what I have read. While not a ton it can amount to another 40+ watts at stock that wont show up by monitoring your 12v lines.

 

Mer dekning finner man her:

http://www.lostcircuits.com/mambo//index.p...mp;limitstart=0

Endret 17. januar 2010 av Theo343

[Xell]

Theo; hvis du slutter, så må jeg ærlig inrømme at jeg blir litt sur. Jeg har alltid vært ivrig promotør av "bidra med det du gidder/har/ønsker". Hvis du synes det tar for mye tid å være "edge-folder" så er det da vel bare å la være å være det. Hvis det er for mye styr med bigad, hvorfor ikke bare gå tilbake til vanlig SMP. FaH er et flott "installer og glem det"-program. Man trenger ikke følge det opp flere timer om dagen. Man trenger ikke å være med på betanivå. Jeg har hatt perioder hvor det eneste jeg har foldet på er en 4 år gammel laptop som fikk lov til å gå på 80% på det meste. Personlig synes jeg det er bedre å la noe rusle å gå i sen egen verden uten tilsyn, enn å kutte helt ut.

 

Hvor aktiv du ønsker å være i tråden er selvsagt helt opp til deg, men jeg håper virkelig at du ikke forsvinner ut helt.

[-alias-]

Theo; hvis du slutter, så må jeg ærlig inrømme at jeg blir litt sur.

Theo slutter nok ikke, håper jeg. Har også hatt perioder hvor feil, krasj og uforklarlig havarert hardware har tæret hardt på humøret (og lommeboka), men etter å ha sovet på det så er man i gang igjen. Det samme tror jeg flere opplever, men slik er det nå. Vi står sammen og folder videre for en god sak.

[War]

Jeg har ikke hatt en fail på 1 uke nå, og jeg hadde fail hver dag før.

 

 

Koden <script language="JavaScript"Send Theo Failnr:404# type="text/javascript">

Fungerte visst.

[Theo343]

Theo; hvis du slutter, så må jeg ærlig inrømme at jeg blir litt sur. Jeg har alltid vært ivrig promotør av "bidra med det du gidder/har/ønsker". Hvis du synes det tar for mye tid å være "edge-folder" så er det da vel bare å la være å være det. Hvis det er for mye styr med bigad, hvorfor ikke bare gå tilbake til vanlig SMP. FaH er et flott "installer og glem det"-program. Man trenger ikke følge det opp flere timer om dagen. Man trenger ikke å være med på betanivå. Jeg har hatt perioder hvor det eneste jeg har foldet på er en 4 år gammel laptop som fikk lov til å gå på 80% på det meste. Personlig synes jeg det er bedre å la noe rusle å gå i sen egen verden uten tilsyn, enn å kutte helt ut.

 

Hvor aktiv du ønsker å være i tråden er selvsagt helt opp til deg, men jeg håper virkelig at du ikke forsvinner ut helt.

Jeg er helt enig, derfor ombestemte jeg meg fort på det å kutte helt ut som du ser i et av innleggene i går. Jeg er nok litt en av de som har vanskelig for å begrense meg og vil være med i front, og da er det lettere å bli utsatt for litt for mange skuffelser hehe.

 

Men jeg gjør som du sier, jeg trekker meg ikke men trekker meg litt tilbake fra fronten (igjen *ler*). Jeg må generellt begrense PC tid pga helse og FAH har vært et av områdene jeg ikke helt har tatt det hensynet.

 

Men så har også dette vært et område man lettere brenner for da det ikke er et rent egoistisk prosjekt om man føler man spiller en viktigere rolle i noe større enn bare å dille med maskiner for egen skyld.

 

Ellers har jeg også tenkt litt på det -alias- sa, bigadv sliter noe fryktelig på maskinvaren, den presser hele hovedkortet og alle railer rimelig bra så jeg kommer heller til å kjøre en litt laid-back SMP på systemet. De feiler sjelden og det svir ikke så mye når en ferdig WU feiler i overføringen til Stanford og blir korrupt (Og det 2 på rad, utrolig). Hadde jeg hatt dedikerte bigadv rigger som eks. Ei57 ville jeg kanskje fortsatt med det eventyret også .

 

Når det gjelder GPU2 så har jeg vært så gal å kjøpe meg 2x5870 til en sum penger som Koner i dette landet hadde gitt "sove på sofaen i 12 uker" for. Dermed skylder jeg nesten prosjektet å bruke GTX 285 og 8800GT som jeg har slengende til GPU2, så får det heller slite på maskinvaren siden vi har gode RMA ordninger i Norge og jeg ikke er avhengig av kortene til spill. Jeg hadde en tanke om å bruke ett av kortene som dedikert PhysX kort sammen med ATI i CF men det er ganske buggy så jeg tviler jeg gidder det.

 

Så neida Xell, en dump i humøret men gir ikke opp laget som viser ekstrem stå på vilje.

 

Og som jeg sa så håper jeg ikke et slikt "stemningsuttrykk" ødelegger for laget. Jeg skal også være ivrig engasjert i førsteposten og har en del ting jeg skulle oppdatert der som jeg ikke har fått helt gjort ennå. Så latterlig den enn må høres ut for mange så er dette et prosjekt som bidrar i potten "følelsen av å ha gjort noe for felleskapet".

 

 

War:

Ha ha ha

 

 

EDIT:

Dette om ikke annet viser jo hva for en ekstrem innsats de på top10 bidrar med. All honnør til dem og ikke minst til folk som Xell som holder orden i rekkene.

 

Og igjen, dette viser også for meg at bigadv er for de store gutta og jentene hehe.

Endret 18. januar 2010 av Theo343

[knopflerbruce]

Er det mulig å finne ut hvilken GPU som står som "-gpu 2"? Tre av disse G92'ene mine kjører 700mhz core finfint, men så er det et som gir EUE avogtil. Hadde vært kjekt å finne ut av dette uten å måtte klokke ned et og et kort...

[Theo343]

Den enkle måten er å starte en og en klient og se hvilket kort som blir varmere.

[ei57]

Har holdt et lite øye med tråden de siste dagene, men avstått fra å kommentere. Skjønner godt Theo's frustrasjon, da alle mine GPU og SMP klienter på et eller annet tidspunkt den siste uka, har vært uvirksomme over lengre tid (pust ut). Selv bigadv hadde sine problemer, men der kan jeg med sikkerhet frikjenne PG. Det hender av og til at Ubuntu-boksen mister nettet og må restartes før den klarer å koble til igjen. Bigadv har forøvrig kjørt eksemplarisk etter en liten innkjøring, der BCLK ble redusert litt i forhold til standard SMP.

 

Kun for SMP er jeg sikker på at serverproblemer hos PG var årsaken. Når det gjelder flere avbrudd på opptil mange timer på GPU'ene, er jeg fortsatt i villrede. De fikk ganske enkelt ikke nye WU'er, men det virket som et problem kun hos meg, da jeg ikke registrerte noe skrik på foldingforumet, ei heller dropp på andre på laget. Det kan selvfølgelig skyldes problemer hos nettleverandøren, da visse sider ikke var tilgjengelig, f.eks. stanford.edu. Det er i slike stunder at en tenker hvorfor gidder jeg dette.

 

Ser at Alias har kommet i mål med bigadv'en sin og det er bare å bøye seg i støvet - 78.660 poeng i en javs, og det er bare 28.75% av lagets bidrag! Kan kanskje være en ide å klokke ned 100 MHz. Dersom det går uten avbrudd, vil du sannsynligvis spare tid på det.

[-alias-]

Ser at Alias har kommet i mål med bigadv'en

Har klokket ned 200MHz til 3.8GHz så får vi se om jeg klarer det innen fristen. Med 4GHz var det ikke noe problem, bigadv gikk unna på 52 timer og ga ca. 59K poeng alene eller 27K PPD. Jeg var nødt til å klokke ned siden PSU får problemer med å gi strøm nok til CPU, og det går ut over stabiliteten for begge skjermkortene som endte opp i gjentatte EUE. Måtte derfor rigge om og sette inn andre kort som bruker mindre strøm. Begge 9800GX2 som sto der flyttet jeg over i en Q6600 rigg og der er nå et totalt forbruk på bare 550W mot 750W i i7-riggen. Så det er hevet over tvil at i7 OC til 4GHz bruker vanvittig med strøm, ca. 250 - 260W med bigadv. Regner med det skal gå bedre nå med 3.8GHz. Hva mente du med at jeg vil spare tid med å klokke ned 100MHz? Bigadv vil jo nødvendigvis ta lengre tid å gjøre ferdig nå enn ved 4GHz.

Endret 18. januar 2010 av -alias-