L4r5 Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 I følge forumet så skal siste driver fungere uten problemer The following versions of Catalyst are known to work with the GPU client: * 6.5 * 6.10 - 6.11 * 7.2 - 7.9 The GPU client will work with these drivers with a significant performance hit: * 6.6 * 6.7 The following drivers do not work at all with the GPU client: * 6.8 * 6.9 * 6.12 * 7.1 http://forum.folding-community.org/ftopic21079.html Lenke til kommentar
L4r5 Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 Tror jeg har løst mysteriet. Jeg burde slå av den ene av CPU-klientene slik at den ene kjernen kan avlaste GPU-klienten visstnok. Fant det ut ved å kikke inne på f@h-forumet. Skal prøve det når jeg kommer hjem og se om det blir noen forskjell da Lenke til kommentar
Xell Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 kan du gi litt mer info? hvilken versjon kjører du (grafisk eller konsoll)? OS? Er ting klokket? Sjekket du loggen? (det kan hende den raporterer lang beregningstid fordi den henger). Su hera sikkert sagt mye om dette før, men jeg gidder ikke å lese halve tråden på nytt Generelt sett er det fint om folk repeterer seg selv på disse punktene når de spør etter tips på noe som virker galt. Lenke til kommentar
Xell Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 arg... så ikke ny post. Tips; du trenger ikke slå den av, bare reduser den til 80% eller noe. Lenke til kommentar
Xell Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 Jeg vil anbefale alle å lese FAQene til de versjonene de velger å kjøre. Spesielt når man kjører beta er det greit å ha lest FAQen så man vet hva man kan forvente seg: Client looks like it is using lots of CPU time: Graphics drivers must poll the GPU to see if it is done. This will look like a lot of CPU time being used, but nothing is really being done, so one can run other relatively CPU heavy code at the same time. However, we do not recommend running multiple FAH clients, as this can significantly slow down the GPU client. A good rule of thumb: leave at least 25% of the CPU time available for the GPU client. Så løsningen kan være å redusere en av cpu kjernene til 70%, altså, i stede for å velge idle under oppsettet så velger man ... (andre alternativet... husker ikke hva det står der akkurat nå) og så 70% når man får spørsmål pm belastning. Det ser altså ut til at det kanskje ikke er så lurt å kjøre GPU og SMP samtidig. Eventuelt redusere SMP til 85% om man har 2-kjerne. Lenke til kommentar
madammim Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 (endret) Så løsningen kan være å redusere en av cpu kjernene til 70%, altså, i stede for å velge idle under oppsettet så velger man ... (andre alternativet... husker ikke hva det står der akkurat nå) og så 70% når man får spørsmål pm belastning. Det ser altså ut til at det kanskje ikke er så lurt å kjøre GPU og SMP samtidig. Eventuelt redusere SMP til 85% om man har 2-kjerne. 9491638[/snapback] Hei. Blir litt svett her. Har satt opp broderens nye q6600@3300MHz med 4 stk. 5.04 (vista 64bit). Dette som takk for hjelp da jeg bygde og klokket den . Reduserte alle til 80% da temp stiger over 60c ved 100%, men forandret ikke denne "idle"-saken... Må dette gjøres? Når jeg leser av belastning så ligger den på ca. 80% på hver kjerne. Han bor ca. 50 mil unna, så blir litt langt å kjøre for å ordne dette... Edit Forandret på ett tall. Endret 14. september 2007 av madammim Lenke til kommentar
Xell Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 (endret) ikke svett. Som sagt husker jeg ikke hva alle valgene er i oppsettet. Det er lenge mellom hver gang jeg går gjennom et oppsett og som regel går alt uten at jeg tenker så veldig mye da. Mente å huske at jeg måtte velge "ikke idle" for å få valget om belastning. Men jeg tar helt sikkert feil. Poenget var egentlig bare å sørge for at man ikke belaster CPU 100% når man skal kjøre GPU ved siden av. Eller når ting rett ot slett blir for varmt. Jeg vurderer faktsik å senke belastningen på mitt SMP oppsett. Det er uhensiktsmessig varmt i stua om dagen. edit: beklager at det kommer mye rart fra denne kanten i dag. har ikke klisterhjærne og siste forklaringen var litt på måfå. Søkte litt runst og ser at "CPU usage requested " er første spørsmål etter "Core Priority (idle/low)". Da Bør man la den stå på Idle og velge en cpu belastning som passer for det man ønsker å bidra med. Endret 14. september 2007 av Xell Lenke til kommentar
L4r5 Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 Etter at jeg satte maskina til å kjøre en cpu-klient og gpu-klienten så går hvert step på gpu-klienten unna på 8 min elns Lenke til kommentar
Xell Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 høres bra ut. Lenke til kommentar
brg Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 brg: henger den midt inni eller på 100%? Jeg har opplevd en del pakker som ikke starter å fortsette å beregne etter at klienten har skjekket om det er ferdige pakker å sende. Da hjelper det å bare stoppe og starte. Man mister altså ikke mer tid enn den tiden den har hengt. Men noen stopper på 100% og de må ofte slettes. Sjekk da om den henter ned og forsøker den samme pakken på nytt. gjør den det vil den mest sannsynlig henge igjenn, og dette vil den gjør 3 ganger. For å ungå at den henter samme pakke på nytt så pass på å slette queue.dat også. edit: dette gjelder bare hvis det er samme run/clone/generation. Man kan ha samme prosjektnummer uten at det er samme arbeidet. 9491175[/snapback] Den stopper mellom 19 og 30% og etter en stund får en Early Unit End. Og så starter den på nytt igjen, hvis jeg ikke avbruter den. Dette er vist nok et kjent problem med denne uniten. Har lest litt på F@H forumet. Lenke til kommentar
Fruktkake Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 Har ikke fått en eneste WU i gang mer enn 1% etter jeg har installert XP. Den ser ut til å gå i en loop. Hva kan være galt? Klikk for å se/fjerne innholdet nedenfor --- Opening Log file [september 14 22:25:23] # Windows Console Edition ##################################################### ############################################################################### Folding@Home Client Version 5.04beta http://folding.stanford.edu ############################################################################### ############################################################################### Launch directory: C:\Program Files (x86)\Folding@Home #1 Service: C:\Program Files (x86)\Folding@Home #1\FAH504-Console.exe Arguments: -svcstart Launched as a service. Entered C:\Program Files (x86)\Folding@Home #1 to do work. [22:25:23] - Ask before connecting: No [22:25:23] - User name: Fruktkake (Team 37651) [22:25:23] - User ID: 314E8A4100812A5D [22:25:23] - Machine ID: 1 [22:25:23] [22:25:23] Loaded queue successfully. [22:25:23] + Benchmarking ... [22:25:26] - Preparing to get new work unit... [22:25:26] + Attempting to get work packet [22:25:26] - Connecting to assignment server [22:25:28] - Successful: assigned to (171.64.122.72). [22:25:28] + News From Folding@Home: Welcome to Folding@Home [22:25:28] Loaded queue successfully. [22:25:37] + Closed connections [22:25:37] [22:25:37] + Processing work unit [22:25:37] Core required: FahCore_80.exe [22:25:37] Core found. [22:25:37] Working on Unit 04 [september 14 22:25:37] [22:25:37] + Working ... [22:25:37] [22:25:37] *------------------------------* [22:25:37] Folding@Home Gromacs SREM Core [22:25:37] Version 1.02 (Dec 15, 2006) [22:25:37] [22:25:37] Preparing to commence simulation [22:25:37] - Looking at optimizations... [22:25:37] - Created dyn [22:25:37] - Files status OK [22:25:38] - Expanded 422018 -> 1965936 (decompressed 465.8 percent) [22:25:38] - Starting from initial work packet [22:25:38] [22:25:38] Project: 3655 (Run 108, Clone 7, Gen 2) [22:25:38] [22:25:38] Assembly optimizations on if available. [22:25:38] Entering M.D. [22:25:44] Protein: p3655_Seq23_Amber03_Native [22:25:44] [22:25:44] Writing local files [22:26:33] Gromacs error. [22:26:33] [22:26:33] Folding@home Core Shutdown: UNKNOWN_ERROR [22:26:36] CoreStatus = 79 (121) [22:26:36] Client-core communications error: ERROR 0x79 [22:26:36] Deleting current work unit & continuing... [22:26:56] - Preparing to get new work unit... [22:26:56] + Attempting to get work packet [22:26:56] - Connecting to assignment server [22:27:13] - Couldn't send HTTP request to server [22:27:13] + Could not connect to Assignment Server [22:27:17] - Successful: assigned to (171.64.122.136). [22:27:17] + News From Folding@Home: Welcome to Folding@Home [22:27:17] Loaded queue successfully. [22:27:25] + Closed connections [22:27:30] [22:27:30] + Processing work unit [22:27:30] Core required: FahCore_7a.exe [22:27:30] Core not found. [22:27:30] - Core is not present or corrupted. [22:27:30] - Attempting to download new core... [22:27:30] + Downloading new core: FahCore_7a.exe [22:27:32] + 10240 bytes downloaded [22:27:33] + 20480 bytes downloaded [22:27:33] + 30720 bytes downloaded [22:27:33] + 40960 bytes downloaded [22:27:34] + 51200 bytes downloaded [22:27:34] + 61440 bytes downloaded [22:27:34] + 71680 bytes downloaded [22:27:34] + 81920 bytes downloaded [22:27:34] + 92160 bytes downloaded [22:27:34] + 102400 bytes downloaded [22:27:34] + 112640 bytes downloaded [22:27:34] + 122880 bytes downloaded [22:27:34] + 133120 bytes downloaded [22:27:34] + 143360 bytes downloaded [22:27:34] + 153600 bytes downloaded [22:27:35] + 163840 bytes downloaded [22:27:35] + 174080 bytes downloaded [22:27:35] + 184320 bytes downloaded [22:27:35] + 194560 bytes downloaded [22:27:35] + 204800 bytes downloaded [22:27:35] + 215040 bytes downloaded [22:27:35] + 225280 bytes downloaded [22:27:35] + 235520 bytes downloaded [22:27:35] + 245760 bytes downloaded [22:27:35] + 256000 bytes downloaded [22:27:35] + 266240 bytes downloaded [22:27:35] + 276480 bytes downloaded [22:27:35] + 286720 bytes downloaded [22:27:35] + 296960 bytes downloaded [22:27:35] + 307200 bytes downloaded [22:27:36] + 317440 bytes downloaded [22:27:36] + 327680 bytes downloaded [22:27:36] + 337920 bytes downloaded [22:27:36] + 348160 bytes downloaded [22:27:36] + 358400 bytes downloaded [22:27:36] + 368640 bytes downloaded [22:27:36] + 378880 bytes downloaded [22:27:36] + 389120 bytes downloaded [22:27:36] + 399360 bytes downloaded [22:27:36] + 409600 bytes downloaded [22:27:36] + 419840 bytes downloaded [22:27:36] + 430080 bytes downloaded [22:27:36] + 440320 bytes downloaded [22:27:36] + 450560 bytes downloaded [22:27:36] + 460800 bytes downloaded [22:27:37] + 471040 bytes downloaded [22:27:37] + 481280 bytes downloaded [22:27:37] + 491520 bytes downloaded [22:27:37] + 501760 bytes downloaded [22:27:37] + 512000 bytes downloaded [22:27:37] + 522240 bytes downloaded [22:27:37] + 532480 bytes downloaded [22:27:37] + 542720 bytes downloaded [22:27:37] + 552960 bytes downloaded [22:27:37] + 563200 bytes downloaded [22:27:37] + 573440 bytes downloaded [22:27:37] + 583680 bytes downloaded [22:27:37] + 593920 bytes downloaded [22:27:38] + 604160 bytes downloaded [22:27:38] + 614400 bytes downloaded [22:27:38] + 624640 bytes downloaded [22:27:38] + 634880 bytes downloaded [22:27:38] + 645120 bytes downloaded [22:27:38] + 655360 bytes downloaded [22:27:38] + 665600 bytes downloaded [22:27:38] + 675840 bytes downloaded [22:27:38] + 686080 bytes downloaded [22:27:38] + 696320 bytes downloaded [22:27:38] + 706560 bytes downloaded [22:27:38] + 716800 bytes downloaded [22:27:38] + 727040 bytes downloaded [22:27:38] + 737280 bytes downloaded [22:27:38] + 747520 bytes downloaded [22:27:39] + 757760 bytes downloaded [22:27:39] + 768000 bytes downloaded [22:27:39] + 778240 bytes downloaded [22:27:39] + 788480 bytes downloaded [22:27:39] + 798720 bytes downloaded [22:27:39] + 808960 bytes downloaded [22:27:39] + 819200 bytes downloaded [22:27:39] + 829440 bytes downloaded [22:27:39] + 839680 bytes downloaded [22:27:39] + 849920 bytes downloaded [22:27:39] + 853452 bytes downloaded [22:27:39] Verifying core Core_7a.fah... [22:27:39] Signature is VALID [22:27:39] [22:27:39] Trying to unzip core FahCore_7a.exe [22:27:40] Decompressed FahCore_7a.exe (2514944 bytes) successfully [22:27:40] + Core successfully engaged [22:27:45] [22:27:45] + Processing work unit [22:27:45] Core required: FahCore_7a.exe [22:27:45] Core found. [22:27:45] Working on Unit 05 [september 14 22:27:45] [22:27:45] + Working ... [22:27:45] [22:27:45] *------------------------------* [22:27:45] Folding@Home GB Gromacs Core [22:27:45] Version 1.94 (March 9, 2007) [22:27:45] [22:27:45] Preparing to commence simulation [22:27:45] - Looking at optimizations... [22:27:45] - Created dyn [22:27:45] - Files status OK [22:27:46] - Expanded 163643 -> 826760 (decompressed 505.2 percent) [22:27:46] - Starting from initial work packet [22:27:46] [22:27:46] Project: 2080 (Run 60, Clone 24, Gen 57) [22:27:46] [22:27:46] Assembly optimizations on if available. [22:27:46] Entering M.D. [22:27:52] Protein: p2080_Abeta_4mer [22:27:52] [22:27:52] Writing local files [22:27:53] Extra SSE boost OK. [22:27:55] Writing local files [22:27:55] Completed 0 out of 500000 steps (0) [22:28:45] Quit 101 - Fatal error: [22:28:45] Step 157, time 0.314 (ps) LINCS WARNING [22:28:45] relative constraint deviation after LINCS: [22:28:45] max 44.853611 (between atoms 2293 and 2294) rms 1.028447 [22:28:45] [22:28:45] Simulation instability has been encountered. The run has entered a [22:28:45] state from which no further progress can be made. [22:28:45] This may be the correct result of the simulation, however if you [22:28:45] often see other project units terminating early like this [22:28:45] too, you may wish to check the stability of your computer (issues [22:28:45] such as high temperature, overclocking, etc.). [22:28:45] Going to send back what have done. [22:28:45] logfile size: 25484 [22:28:45] - Writing 26164 bytes of core data to disk... [22:28:45] ... Done. [22:28:45] [22:28:45] Folding@home Core Shutdown: EARLY_UNIT_END [22:28:47] CoreStatus = 72 (114) [22:28:47] Sending work to server [22:28:47] + Attempting to send results [22:29:06] + Results successfully sent [22:29:06] Thank you for your contribution to Folding@Home. [22:29:10] - Preparing to get new work unit... [22:29:10] + Attempting to get work packet [22:29:10] - Connecting to assignment server [22:29:11] - Successful: assigned to (171.64.122.72). [22:29:11] + News From Folding@Home: Welcome to Folding@Home [22:29:12] Loaded queue successfully. [22:29:20] + Closed connections [22:29:25] [22:29:25] + Processing work unit [22:29:25] Core required: FahCore_80.exe [22:29:25] Core found. [22:29:25] Working on Unit 06 [september 14 22:29:25] [22:29:25] + Working ... [22:29:25] [22:29:25] *------------------------------* [22:29:25] Folding@Home Gromacs SREM Core [22:29:25] Version 1.02 (Dec 15, 2006) [22:29:25] [22:29:25] Preparing to commence simulation [22:29:25] - Looking at optimizations... [22:29:25] - Created dyn [22:29:25] - Files status OK [22:29:26] - Expanded 422018 -> 1965936 (decompressed 465.8 percent) [22:29:26] - Starting from initial work packet [22:29:26] [22:29:26] Project: 3655 (Run 108, Clone 7, Gen 2) [22:29:26] [22:29:26] Assembly optimizations on if available. [22:29:26] Entering M.D. [22:29:32] Protein: p3655_Seq23_Amber03_Native [22:29:32] [22:29:32] Writing local files [22:30:17] Gromacs error. [22:30:17] [22:30:17] Folding@home Core Shutdown: UNKNOWN_ERROR [22:30:21] CoreStatus = 79 (121) [22:30:21] Client-core communications error: ERROR 0x79 [22:30:21] Deleting current work unit & continuing... [22:30:41] - Preparing to get new work unit... [22:30:41] + Attempting to get work packet [22:30:41] - Connecting to assignment server [22:30:43] - Successful: assigned to (171.64.122.72). [22:30:43] + News From Folding@Home: Welcome to Folding@Home [22:30:43] Loaded queue successfully. [22:30:59] + Closed connections [22:31:04] [22:31:04] + Processing work unit [22:31:04] Core required: FahCore_80.exe [22:31:04] Core found. [22:31:04] Working on Unit 07 [september 14 22:31:04] [22:31:04] + Working ... [22:31:04] [22:31:04] *------------------------------* [22:31:04] Folding@Home Gromacs SREM Core [22:31:04] Version 1.02 (Dec 15, 2006) [22:31:04] [22:31:04] Preparing to commence simulation [22:31:04] - Looking at optimizations... [22:31:04] - Created dyn [22:31:04] - Files status OK [22:31:05] - Expanded 422018 -> 1965936 (decompressed 465.8 percent) [22:31:05] - Starting from initial work packet [22:31:05] [22:31:05] Project: 3655 (Run 108, Clone 7, Gen 2) [22:31:05] [22:31:05] Assembly optimizations on if available. [22:31:05] Entering M.D. [22:31:11] Protein: p3655_Seq23_Amber03_Native [22:31:11] [22:31:11] Writing local files [22:31:56] Gromacs error. [22:31:56] [22:31:56] Folding@home Core Shutdown: UNKNOWN_ERROR [22:31:58] CoreStatus = 79 (121) [22:31:58] Client-core communications error: ERROR 0x79 [22:31:58] Deleting current work unit & continuing... [22:32:18] - Preparing to get new work unit... [22:32:18] + Attempting to get work packet [22:32:18] - Connecting to assignment server [22:32:23] - Successful: assigned to (171.64.122.72). [22:32:23] + News From Folding@Home: Welcome to Folding@Home [22:32:23] Loaded queue successfully. [22:32:30] + Closed connections [22:32:35] [22:32:35] + Processing work unit [22:32:35] Core required: FahCore_80.exe [22:32:35] Core found. [22:32:35] Working on Unit 08 [september 14 22:32:35] [22:32:35] + Working ... [22:32:35] [22:32:35] *------------------------------* [22:32:35] Folding@Home Gromacs SREM Core [22:32:35] Version 1.02 (Dec 15, 2006) [22:32:35] [22:32:35] Preparing to commence simulation [22:32:35] - Looking at optimizations... [22:32:35] - Created dyn [22:32:35] - Files status OK [22:32:35] - Expanded 422018 -> 1965936 (decompressed 465.8 percent) [22:32:35] - Starting from initial work packet [22:32:35] [22:32:35] Project: 3655 (Run 108, Clone 7, Gen 2) [22:32:35] [22:32:35] Assembly optimizations on if available. [22:32:35] Entering M.D. [22:32:42] Protein: p3655_Seq23_Amber03_Native [22:32:42] [22:32:42] Writing local files [22:33:28] Gromacs error. [22:33:28] [22:33:28] Folding@home Core Shutdown: UNKNOWN_ERROR [22:33:31] CoreStatus = 79 (121) [22:33:31] Client-core communications error: ERROR 0x79 [22:33:31] - Attempting to download new core... [22:33:31] + Downloading new core: FahCore_80.exe [22:33:37] + 10240 bytes downloaded [22:33:37] + 20480 bytes downloaded [22:33:37] + 30720 bytes downloaded [22:33:38] + 40960 bytes downloaded [22:33:38] + 51200 bytes downloaded [22:33:38] + 61440 bytes downloaded [22:33:38] + 71680 bytes downloaded [22:33:38] + 81920 bytes downloaded [22:33:38] + 92160 bytes downloaded [22:33:38] + 102400 bytes downloaded [22:33:39] + 112640 bytes downloaded [22:33:39] + 122880 bytes downloaded [22:33:39] + 133120 bytes downloaded [22:33:39] + 143360 bytes downloaded [22:33:39] + 153600 bytes downloaded [22:33:39] + 163840 bytes downloaded [22:33:39] + 174080 bytes downloaded [22:33:39] + 184320 bytes downloaded [22:33:39] + 194560 bytes downloaded [22:33:39] + 204800 bytes downloaded [22:33:39] + 215040 bytes downloaded [22:33:39] + 225280 bytes downloaded [22:33:40] + 235520 bytes downloaded [22:33:40] + 245760 bytes downloaded [22:33:40] + 256000 bytes downloaded [22:33:40] + 266240 bytes downloaded [22:33:40] + 276480 bytes downloaded [22:33:40] + 286720 bytes downloaded [22:33:40] + 296960 bytes downloaded [22:33:40] + 307200 bytes downloaded [22:33:40] + 317440 bytes downloaded [22:33:40] + 327680 bytes downloaded [22:33:40] + 337920 bytes downloaded [22:33:40] + 348160 bytes downloaded [22:33:40] + 358400 bytes downloaded [22:33:40] + 368640 bytes downloaded [22:33:40] + 378880 bytes downloaded [22:33:40] + 389120 bytes downloaded [22:33:40] + 399360 bytes downloaded [22:33:41] + 409600 bytes downloaded [22:33:41] + 419840 bytes downloaded [22:33:41] + 430080 bytes downloaded [22:33:41] + 440320 bytes downloaded [22:33:41] + 450560 bytes downloaded [22:33:41] + 460800 bytes downloaded [22:33:41] + 471040 bytes downloaded [22:33:41] + 481280 bytes downloaded [22:33:41] + 491520 bytes downloaded [22:33:41] + 501760 bytes downloaded [22:33:41] + 512000 bytes downloaded [22:33:41] + 522240 bytes downloaded [22:33:41] + 532480 bytes downloaded [22:33:41] + 542720 bytes downloaded [22:33:41] + 552960 bytes downloaded [22:33:42] + 563200 bytes downloaded [22:33:42] + 573440 bytes downloaded [22:33:42] + 583680 bytes downloaded [22:33:42] + 593920 bytes downloaded [22:33:42] + 604160 bytes downloaded [22:33:42] + 614400 bytes downloaded [22:33:42] + 624640 bytes downloaded [22:33:42] + 634880 bytes downloaded [22:33:42] + 645120 bytes downloaded [22:33:42] + 655360 bytes downloaded [22:33:42] + 665600 bytes downloaded [22:33:42] + 675840 bytes downloaded [22:33:42] + 686080 bytes downloaded [22:33:42] + 696320 bytes downloaded [22:33:42] + 706560 bytes downloaded [22:33:43] + 716800 bytes downloaded [22:33:43] + 727040 bytes downloaded [22:33:43] + 737280 bytes downloaded [22:33:43] + 747520 bytes downloaded [22:33:43] + 757760 bytes downloaded [22:33:43] + 768000 bytes downloaded [22:33:43] + 778240 bytes downloaded [22:33:43] + 788480 bytes downloaded [22:33:43] + 798720 bytes downloaded [22:33:43] + 808960 bytes downloaded [22:33:43] + 819200 bytes downloaded [22:33:43] + 825683 bytes downloaded [22:33:43] Verifying core Core_80.fah... [22:33:43] Signature is VALID [22:33:43] [22:33:43] Trying to unzip core FahCore_80.exe [22:33:44] Decompressed FahCore_80.exe (2392064 bytes) successfully [22:33:44] + Core successfully engaged [22:33:44] Deleting current work unit & continuing... [22:34:04] - Preparing to get new work unit... [22:34:04] + Attempting to get work packet [22:34:04] - Connecting to assignment server [22:34:18] - Successful: assigned to (171.64.122.72). [22:34:18] + News From Folding@Home: Welcome to Folding@Home [22:34:18] Loaded queue successfully. [22:34:25] + Closed connections [22:34:30] [22:34:30] + Processing work unit [22:34:30] Core required: FahCore_80.exe [22:34:30] Core found. [22:34:30] Working on Unit 09 [september 14 22:34:30] [22:34:30] + Working ... [22:34:30] [22:34:30] *------------------------------* [22:34:30] Folding@Home Gromacs SREM Core [22:34:30] Version 1.02 (Dec 15, 2006) [22:34:30] [22:34:30] Preparing to commence simulation [22:34:30] - Looking at optimizations... [22:34:30] - Created dyn [22:34:30] - Files status OK [22:34:30] - Expanded 422018 -> 1965936 (decompressed 465.8 percent) [22:34:30] - Starting from initial work packet [22:34:30] [22:34:30] Project: 3655 (Run 108, Clone 7, Gen 2) [22:34:30] [22:34:30] Assembly optimizations on if available. [22:34:30] Entering M.D. [22:34:37] Protein: p3655_Seq23_Amber03_Native [22:34:37] [22:34:37] Writing local files [22:35:22] Gromacs error. [22:35:22] [22:35:22] Folding@home Core Shutdown: UNKNOWN_ERROR [22:35:24] CoreStatus = 79 (121) [22:35:24] Client-core communications error: ERROR 0x79 [22:35:24] Deleting current work unit & continuing... [22:35:44] - Preparing to get new work unit... [22:35:44] + Attempting to get work packet [22:35:44] - Connecting to assignment server [22:35:46] - Successful: assigned to (171.64.122.72). [22:35:46] + News From Folding@Home: Welcome to Folding@Home [22:35:46] Loaded queue successfully. [22:35:56] + Closed connections [22:36:01] [22:36:01] + Processing work unit [22:36:01] Core required: FahCore_80.exe [22:36:01] Core found. [22:36:01] Working on Unit 00 [september 14 22:36:01] [22:36:01] + Working ... [22:36:01] [22:36:01] *------------------------------* [22:36:01] Folding@Home Gromacs SREM Core [22:36:01] Version 1.02 (Dec 15, 2006) [22:36:01] [22:36:01] Preparing to commence simulation [22:36:01] - Looking at optimizations... [22:36:01] - Created dyn [22:36:01] - Files status OK [22:36:02] - Expanded 422018 -> 1965936 (decompressed 465.8 percent) [22:36:02] - Starting from initial work packet [22:36:02] [22:36:02] Project: 3655 (Run 108, Clone 7, Gen 2) [22:36:02] [22:36:02] Assembly optimizations on if available. [22:36:02] Entering M.D. [22:36:08] Protein: p3655_Seq23_Amber03_Native [22:36:08] [22:36:08] Writing local files [22:36:56] Gromacs error. [22:36:56] [22:36:56] Folding@home Core Shutdown: UNKNOWN_ERROR [22:36:59] CoreStatus = 79 (121) [22:36:59] Client-core communications error: ERROR 0x79 [22:36:59] Deleting current work unit & continuing... [22:37:19] - Preparing to get new work unit... [22:37:19] + Attempting to get work packet [22:37:19] - Connecting to assignment server [22:37:21] - Successful: assigned to (171.64.122.72). [22:37:21] + News From Folding@Home: Welcome to Folding@Home [22:37:22] Loaded queue successfully. [22:37:23] - Error: Attempt #1 to get work failed, and no other work to do. Waiting before retry. [22:37:32] + Attempting to get work packet [22:37:32] - Connecting to assignment server [22:37:33] - Successful: assigned to (171.64.122.72). [22:37:33] + News From Folding@Home: Welcome to Folding@Home [22:37:33] Loaded queue successfully. [22:37:41] + Closed connections [22:37:46] [22:37:46] + Processing work unit [22:37:46] Core required: FahCore_80.exe [22:37:46] Core found. [22:37:46] Working on Unit 01 [september 14 22:37:46] [22:37:46] + Working ... [22:37:47] [22:37:47] *------------------------------* [22:37:47] Folding@Home Gromacs SREM Core [22:37:47] Version 1.02 (Dec 15, 2006) [22:37:47] [22:37:47] Preparing to commence simulation [22:37:47] - Looking at optimizations... [22:37:47] - Created dyn [22:37:47] - Files status OK [22:37:47] - Expanded 420225 -> 1966344 (decompressed 467.9 percent) [22:37:47] - Starting from initial work packet [22:37:47] [22:37:47] Project: 3696 (Run 22, Clone 1, Gen 2) [22:37:47] [22:37:47] Assembly optimizations on if available. [22:37:47] Entering M.D. [22:37:54] Protein: p3696_Seq15_Amber03_Extended [22:37:54] [22:37:54] Writing local files [22:38:37] Extra SSE boost OK. [22:38:37] Writing local files [22:38:37] Completed 0 out of 1500000 steps (0) [22:38:50] Quit 101 - Fatal error: [22:38:50] Step 57, time 0.114 (ps) LINCS WARNING [22:38:50] relative constraint deviation after LINCS: [22:38:50] max 0.000000 (between atoms 1 and 2) rms 1.#QNAN0 [22:38:50] [22:38:50] Simulation instability has been encountered. The run has entered a [22:38:50] state from which no further progress can be made. [22:38:50] This may be the correct result of the simulation, however if you [22:38:50] often see other project units terminating early like this [22:38:50] too, you may wish to check the stability of your computer (issues [22:38:50] such as high temperature, overclocking, etc.). [22:38:50] Going to send back what have done. [22:38:51] logfile size: 35008 [22:38:51] - Writing 35680 bytes of core data to disk... [22:38:51] Done: 35168 -> 3277 (compressed to 9.3 percent) [22:38:51] ... Done. [22:38:51] [22:38:51] Folding@home Core Shutdown: EARLY_UNIT_END [22:38:53] CoreStatus = 72 (114) [22:38:53] Sending work to server [22:38:53] + Attempting to send results [22:38:53] - Error: Could not read results file work/wuresults_01.dat from disk [22:38:53] - Error: Could not read unit 01 file. Removing from queue. [22:38:53] - Preparing to get new work unit... [22:38:53] + Attempting to get work packet [22:38:53] - Connecting to assignment server [22:38:58] - Successful: assigned to (171.64.122.72). [22:38:58] + News From Folding@Home: Welcome to Folding@Home [22:38:58] Loaded queue successfully. [22:39:08] + Closed connections [22:39:13] [22:39:13] + Processing work unit [22:39:13] Core required: FahCore_80.exe [22:39:13] Core found. [22:39:13] Working on Unit 02 [september 14 22:39:13] [22:39:13] + Working ... [22:39:14] [22:39:14] *------------------------------* [22:39:14] Folding@Home Gromacs SREM Core [22:39:14] Version 1.02 (Dec 15, 2006) [22:39:14] [22:39:14] Preparing to commence simulation [22:39:14] - Looking at optimizations... [22:39:14] - Created dyn [22:39:14] - Files status OK [22:39:14] - Expanded 420225 -> 1966344 (decompressed 467.9 percent) [22:39:14] - Starting from initial work packet [22:39:14] [22:39:14] Project: 3696 (Run 22, Clone 1, Gen 2) [22:39:14] [22:39:14] Assembly optimizations on if available. [22:39:14] Entering M.D. [22:39:21] Protein: p3696_Seq15_Amber03_Extended [22:39:21] [22:39:21] Writing local files Lenke til kommentar
Xell Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 (endret) [22:28:45] Simulation instability has been encountered. The run has entered a[22:28:45] state from which no further progress can be made. [22:28:45] This may be the correct result of the simulation, however if you [22:28:45] often see other project units terminating early like this [22:28:45] too, you may wish to check the stability of your computer (issues [22:28:45] such as high temperature, overclocking, etc.). Synes vel egentlig det der var ganske klar melding. er det varmt? Har du klokket? edit: ser også at du har flere core error 79 i loggen. rask google på denne gav følgende resultat: This error also can be caused by memory errors which may be related to overclocking or wrong voltages or simply by bad RAM. If this error occurs when the core is just starting, there's a reasonable chance that it was an "unable to allocate" issue such as running out of space in the paging file or a memory fragmentation issue. This error also can be caused by a WU which is corrupted during downloading. Endret 14. september 2007 av Xell Lenke til kommentar
Fruktkake Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 Har aldri overkokket noen deler, eller hatt temperaturproblemer. Kan det ha noe med AMD game optimiser (eller hva den het) å gjøre? Lenke til kommentar
Xell Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 (endret) kan du liste opp systemspeks? alt i fra prosessor til minemende og chipset på hovedkortet? Man vet aldri hva som kan være nyttig informasjon. edit: hvis du mener AMD Dual Core Optimizer så skal den ikke ødelegge noe i følge FaH forumet. edit2: kjører du som service eller manuelt? hvis service; har du kjørt som manuelt først? edit3: uten å vite akkurat hva som er problemet kan du prøve følgende; 1: stop klienten (metode avheger av service eller ikke). 2: slett work-katalogen og queue.dat. 3: start klienten igjenn. uavhengig av hva som er feil er det værste som kan skje etter dette at du fortsatt har samme feil. I beste tilfelle løser det problemet. Endret 14. september 2007 av Xell Lenke til kommentar
Fruktkake Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 Kjører som service. Installerte, kjørte så begge opp, konfigurerte de og restartet. Har kjørt service fint i Vista før dette. AMD Athlon 64 X2 4200+ (939) PC3200 RAM fra Geil, 400mhz, 2x 1GB Asus A8N SLI Deluxe Point of View 7800GT Windows XP Professional x64 Resten er vel ikke relevant. Lenke til kommentar
Xell Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 tillegssptørsmål: er feilen i begge kjernene? har du gjennomført noen WUer siden install eller har alle vært slik? Lenke til kommentar
Fruktkake Skrevet 14. september 2007 Rapporter Del Skrevet 14. september 2007 Alle har vært slik, har ikke kommet over 1% på noen av kjernene. Lenke til kommentar
Xell Skrevet 15. september 2007 Rapporter Del Skrevet 15. september 2007 har du prøvd å slette? Lenke til kommentar
Gaervern Skrevet 15. september 2007 Rapporter Del Skrevet 15. september 2007 Det er nesten alltid vært litt oppstartsproblemer når jeg har installert SMP i windows. Det har løst seg ved å kjøre -config noen ganger eller ved å avinstallere, slette alt og installere på nytt. Man må bare ikke gi seg! Lenke til kommentar
Xell Skrevet 15. september 2007 Rapporter Del Skrevet 15. september 2007 tror ikke han kjører smp men to seperate standardklienter. Tolket det i hvertfall dithen når han sier "startet begge" Lenke til kommentar
Anbefalte innlegg
Opprett en konto eller logg inn for å kommentere
Du må være et medlem for å kunne skrive en kommentar
Opprett konto
Det er enkelt å melde seg inn for å starte en ny konto!
Start en kontoLogg inn
Har du allerede en konto? Logg inn her.
Logg inn nå