har scriptet, vet ikke språket

[aklla]

jeg trenger litt hjelp her

jeg har fått funnet ett script, men jeg vet ikke åssen språk det er i, kan noen si hvilke språk det scriptet under er?

 

 

[Unattended]
Filesystem = "ConvertNTFS"
TargetPath = "Winnt"
UnattendMode = "FullUnattended"
[GuiUnattended]
AdminPassword = "Password"
AutoLogon = "YES"
AutoLogonCount = "1"
TimeZone = "004"
[UserData]
ComputerName = "COMPUTER_NAME"
FullName = "Your User Name"
OrgName = "Your Organization Name"
[Display]
VRefresh = "75"
BitsPerPel = "8"
XResolution = "800"
YResolution = "600"
[Networking]
[Identification]
DomainAdmin = "Accountname"
DomainAdminPassword = "Password"
JoinDomain = "Domainname"
[NetAdapters]
; In this example, there are two network adapters, Adapter01 
; and Adapter02. Note that the adapter specified here as 01 is not 
; always local area network (LAN) connection 1 in the user interface.
Adapter01 = "params.Adapter01"
Adapter02 = "params.Adapter02"
[params.Adapter01]
; Specifies which adapter is number one. Note that the InfID key
; must match a valid PNP ID in the system. For example, a valid
; PNP ID might look like the following: InfID = "pci\ven_0e11&dev_ae32"
InfID = "Your_PNP_ID_for_Adapter01"
; If you have two cards with the same PnP ID, you can specify the MAC 
; address of each network adapter with the NetCardAddress value.
[params.Adapter02]
; Specifies which adapter is number two. Note that the InfID key;must
; match a valid PNP ID in the system. For example, a valid PNP ID 
; might look as follows: InfID = "pci\ven_8086&dev_1229&subsys_00018086"
InfID = "Your_PNP_ID_for_Adapter02"
[NetProtocols]
; Installs only the TCP/IP protocol.
MS_TCPIP = "params.MS_TCPIP"
[params.MS_TCPIP]
; This section configures the TCP/IP properties.
AdapterSections = "params.MS_TCPIP.Adapter01, params.MS_TCPIP.Adapter02"
[params.MS_TCPIP.Adapter01]
; Adapter01 uses DHCP server information.
SpecificTo = "Adapter01"
DHCP = "YES"
WINS = "YES"
[params.MS_TCPIP.Adapter02]
; Adapter02 uses static TCP/IP configuration.
SpecificTo = "Adapter02"
IPAddress = "1.1.1.1"
SubnetMask = "255.255.248.0"
DefaultGateway = "2.2.2.2"
DHCP = "NO"
WINS = "NO"
[NetClients]
; Installs the Client for Microsoft Networks.
MS_MSClient = "params.MS_MSClient"
[params.MS_MSClient]
[NetServices]
; Install File and Print services.
MS_Server = "params.MS_Server"
[Data]
; These keys are required when initiating an unattended installation
; from the CD-ROM 
AutoPartition = "1"
MsDosInitiated = "0"
UnattendedInstall = "YES"

[ViperGTS]

Syntes dette ser mer ut som en config fil jeg

[abcd423417984]

Syntes dette ser mer ut som en config fil jeg

enig. det der er bare en opplisting av egenskaper, og utfører ingenting selv slik jeg ser det.

[diskvask]

Jeg tror det er en scriptfil til "unattended"/ubemannet installasjon av win2000 (?)

[aklla]

det er en "ubemannet" installasjon av w2k ja..

[diskvask]

Det er "svar" på de spørsmålene som kommer opp under installasjonsveiviseren.

 

Ler mer her http://www.mcmcse.com/win2k/guides/unattend.shtml (første treff i google... )

[GeirGrusom]

Den bare gir parameter til et annet program (installasjonsprogram)

Det er ikke et script da det bare definerer verdier for et minne området.