multi-kortleser

[kyrsjo]

Har en USB kotleser som støtter en rekke formater (deriblant SmartMedia, som jeg bruker). Desverre får jeg ikke denne til å fungere. Dmesg gir dette nåt jeg plugger inn:

hub.c: new USB device 00:1d.1-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x3538/0x15) is not claimed by any active driver.SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
 Vendor: GENERIC   Model: Card Reader   CF  Rev: v26F
 Type:   Direct-Access                      ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
sda: Unit Not Ready, sense:
Info fld=0x0, Current 00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Info fld=0x0, Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
sda: Unit Not Ready, sense:
Info fld=0x0, Current 00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Info fld=0x0, Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
sda: Unit Not Ready, sense:
Info fld=0x0, Current 00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Info fld=0x0, Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
sda: Unit Not Ready, sense:
Info fld=0x0, Current 00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Info fld=0x0, Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
sda: Unit Not Ready, sense:
Info fld=0x0, Current 00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Info fld=0x0, Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
sda: Unit Not Ready, sense:
Info fld=0x0, Current 00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Info fld=0x0, Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
I/O error: dev 08:00, sector 0

 

Jeg har prøvd utallige ganger før å få dette til å fungere, men aldri fått det til. Ja, det står i et smart-media kort.

 

fdisk -l gir dette:

[root@kyrre-laptop root]# fdisk -l

Disk /dev/hda: 20.0 GB, 20003880960 bytes
240 heads, 63 sectors/track, 2584 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes

  Device Boot    Start       End    Blocks   Id  System
/dev/hda1   *      1907      2584   5125680    7  HPFS/NTFS
/dev/hda2             1        14    105808+  83  Linux
/dev/hda3            15      1837  13781880   83  Linux
/dev/hda4          1838      1906    521640    f  Win95 Ext'd (LBA)
/dev/hda5          1838      1906    521608+  82  Linux swap

Partition table entries are not in disk order
[root@kyrre-laptop root]#

 

Jeg får lest alle andre USB Mass Storage ting som kameraet mit som bruker Smart Media, og minneplugger uten problemer

[Cronius]

Hvilken modell/merke er det? Et søk på google på dette +linux kanskje hjelper..?

 

Det er i hvert fall det jeg har gjort når jeg har hatt problemer med spesifikk hardware, man kan banne på at det alltid er en eller annen som har hatt samme problem før deg.

 

Edit: skriveleif

Endret 25. februar 2004 av Cronius

[Velmont]

Min er SanDisk 6in1 SD86 eller noe i den duren og funker superb (så vet du om en som funker iallfall )

[kyrsjo]

hva gjør du for å mounte den? dukker den opp som flere devicer a la sda sdb osv...?

[kyrsjo]

Hmm... Søkte litt. En hel haug som klaget over at den ikke virket, men ingen løsning. Spesiellt interessant var at en på en tysk mailingliste (så vidt jeg kunne forstå men mine heller tvilsomme tyskkunskaper), sa at den virket med 2.4.19 kernel men ikke 2.4.20?!?

 

Mitt søk:

http://www.google.com/search?hl=en&lr=&ie=...G=Google+Search