Gå til innhold

smart "seek error rate" fra 0-7566 på 2 timer ny Barracuda


Rascal

Anbefalte innlegg

Videoannonse
Annonse

Første harddisken var Disk Model -9YN164 som kunne oppdateres til firmware versjon CC4H.

 

De andre harddiskene var Disk Model -1CH164, som firmware ikke kan oppdateres ifølge oversikten, men jeg prøvde allikevel. Vanskelig å ta skjermbilde i dos. Begge gangene var de koblet til SATA Port 1.

post-5300-0-26450400-1360602802_thumb.jpg

post-5300-0-01276700-1360602857_thumb.jpg

Lenke til kommentar

På min harddisk fra samsung er raw read error på 100 av 100, med data verdi 0, seek error rate er 253 av 253 og data verdi på 0.

 

På min seagate barracuda er raw read error på 118 av 100 med data verdi 197113768, og seek error rate er 100 av 253 og har data verdi 196204.

 

Hvordan kan min seagate baracuda være fin?

post-5300-0-29673000-1360690562_thumb.jpg

post-5300-0-87858300-1360690572_thumb.jpg

Lenke til kommentar

Her er min smart data:

 

 

[olav@tank01 ~]$ sudo smartctl -a /dev/da0

smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-STABLE amd64] (local build)

Copyright © 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===

Model Family: Seagate Barracuda Green (AF)

Device Model: ST2000DL003-9VT166

Serial Number: 5YD47D9A

LU WWN Device Id: 5 000c50 038f117b7

Firmware Version: CC32

User Capacity: 2,000,398,934,016 bytes [2.00 TB]

Sector Size: 512 bytes logical/physical

Rotation Rate: 5900 rpm

Device is: In smartctl database [for details use: -P show]

ATA Version is: ATA8-ACS T13/1699-D revision 4

SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)

Local Time is: Tue Feb 12 23:29:19 2013 CET

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

General SMART Values:

Offline data collection status: (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: ( 612) seconds.

Offline data collection

capabilities: (0x7b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 1) minutes.

Extended self-test routine

recommended polling time: ( 334) minutes.

Conveyance self-test routine

recommended polling time: ( 2) minutes.

SCT capabilities: (0x30b7) SCT Status supported.

SCT Feature Control supported.

SCT Data Table supported.

SMART Attributes Data Structure revision number: 10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 199454760

3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0

4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 28

5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0

7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 17645388

9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 11257

10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0

12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 28

183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0

184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0

187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0

188 Command_Timeout 0x0032 100 100 000 Old_age Always - 1

189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1

190 Airflow_Temperature_Cel 0x0022 073 060 045 Old_age Always - 27 (Min/Max 20/33)

191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0

192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 27

193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 28

194 Temperature_Celsius 0x0022 027 040 000 Old_age Always - 27 (0 20 0 0 0)

195 Hardware_ECC_Recovered 0x001a 027 004 000 Old_age Always - 199454760

197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0

198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0

199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0

240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 193234873625593

241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 104755350

242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 4133262670

SMART Error Log Version: 1

No Errors Logged

SMART Self-test log structure revision number 1

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

# 1 Short offline Completed without error 00% 0 -

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

[olav@tank01 ~]$ sudo smartctl -a /dev/da1

smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-STABLE amd64] (local build)

Copyright © 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===

Model Family: Seagate Barracuda Green (AF)

Device Model: ST2000DL003-9VT166

Serial Number: 5YD4TV2B

LU WWN Device Id: 5 000c50 03e1119da

Firmware Version: CC32

User Capacity: 2,000,398,934,016 bytes [2.00 TB]

Sector Size: 512 bytes logical/physical

Rotation Rate: 5900 rpm

Device is: In smartctl database [for details use: -P show]

ATA Version is: ATA8-ACS T13/1699-D revision 4

SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)

Local Time is: Tue Feb 12 23:29:35 2013 CET

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

General SMART Values:

Offline data collection status: (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: ( 623) seconds.

Offline data collection

capabilities: (0x7b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 1) minutes.

Extended self-test routine

recommended polling time: ( 331) minutes.

Conveyance self-test routine

recommended polling time: ( 2) minutes.

SCT capabilities: (0x30b7) SCT Status supported.

SCT Feature Control supported.

SCT Data Table supported.

SMART Attributes Data Structure revision number: 10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 103 099 006 Pre-fail Always - 6147504

3 Spin_Up_Time 0x0003 070 070 000 Pre-fail Always - 0

4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 18

5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0

7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 17771586

9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 11248

10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0

12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 18

183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0

184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0

187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0

188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0

189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0

190 Airflow_Temperature_Cel 0x0022 069 055 045 Old_age Always - 31 (Min/Max 24/37)

191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0

192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 17

193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 18

194 Temperature_Celsius 0x0022 031 045 000 Old_age Always - 31 (0 23 0 0 0)

195 Hardware_ECC_Recovered 0x001a 013 004 000 Old_age Always - 6147504

197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0

198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0

199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0

240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 19632295521264

241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2915064369

242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1645760924

SMART Error Log Version: 1

No Errors Logged

SMART Self-test log structure revision number 1

No self-tests have been logged. [To run self-tests, use: smartctl -t]

 

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

[olav@tank01 ~]$ sudo smartctl -a /dev/da2

smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-STABLE amd64] (local build)

Copyright © 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===

Model Family: Seagate Barracuda Green (AF)

Device Model: ST2000DL003-9VT166

Serial Number: 5YD31BZ3

LU WWN Device Id: 5 000c50 03677fc7d

Firmware Version: CC32

User Capacity: 2,000,398,934,016 bytes [2.00 TB]

Sector Size: 512 bytes logical/physical

Rotation Rate: 5900 rpm

Device is: In smartctl database [for details use: -P show]

ATA Version is: ATA8-ACS T13/1699-D revision 4

SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)

Local Time is: Tue Feb 12 23:29:38 2013 CET

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

General SMART Values:

Offline data collection status: (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: ( 623) seconds.

Offline data collection

capabilities: (0x7b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 1) minutes.

Extended self-test routine

recommended polling time: ( 356) minutes.

Conveyance self-test routine

recommended polling time: ( 2) minutes.

SCT capabilities: (0x30b7) SCT Status supported.

SCT Feature Control supported.

SCT Data Table supported.

SMART Attributes Data Structure revision number: 10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 198308472

3 Spin_Up_Time 0x0003 073 073 000 Pre-fail Always - 0

4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 28

5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0

7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 17539661

9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 11313

10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0

12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 28

183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0

184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0

187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0

188 Command_Timeout 0x0032 100 100 000 Old_age Always - 1

189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0

190 Airflow_Temperature_Cel 0x0022 069 054 045 Old_age Always - 31 (Min/Max 24/37)

191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0

192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 27

193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 28

194 Temperature_Celsius 0x0022 031 046 000 Old_age Always - 31 (0 20 0 0 0)

195 Hardware_ECC_Recovered 0x001a 026 003 000 Old_age Always - 198308472

197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0

198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0

199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0

240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 83567178689584

241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3044087808

242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2552317594

SMART Error Log Version: 1

No Errors Logged

SMART Self-test log structure revision number 1

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

# 1 Short offline Completed without error 00% 65 -

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

 

 

Endret av Hårek
Lang liste, lagt i spoiler.
Lenke til kommentar

Opprett en konto eller logg inn for å kommentere

Du må være et medlem for å kunne skrive en kommentar

Opprett konto

Det er enkelt å melde seg inn for å starte en ny konto!

Start en konto

Logg inn

Har du allerede en konto? Logg inn her.

Logg inn nå
  • Hvem er aktive   0 medlemmer

    • Ingen innloggede medlemmer aktive
×
×
  • Opprett ny...