RAM til Gigabyte X58A-UD3R/konfigurering/tweaking

[kjelle392]

Hei

 

Jeg har en mistanke om at alt ikke er på stell når det gjelder RAM-konfigurasjonen på maskina mi.

 

Iht. Sandra er minneoppsettet slik:

 

< Logical/Chipset Memory Banks >

Bank 0: 2GB DIMM DDR3 8-8-8-20 4-28-9-5 1T

Bank 3: 2GB DIMM DDR3 8-8-8-20 4-28-9-5 1T

Bank 6: 2GB DIMM DDR3 8-8-8-20 4-28-9-5 1T

Maximum Installable Memory: 48GB

Supported Memory Types: DIMM DDR3 Scrubbing

Channels: 3

Memory Bus Speed: 2x 540MHz (1.08GHz)

Maximum Memory Speed: 2x 533MHz (1GHz)

Multiplier: 4x

Width: 64-bit

Integrated in Processor: Yes

Power Save Mode: No

Fixed Hole Present: No

Maximum Memory Bus Bandwidth: 25.31GB/s

< APIC 1 >

Model: Intel Trusted Execution Technology Registers

Revision: B4

Version: 2.00

Multiplier: 1/2x

Maximum Interrupts: 24

IRQ Handler Engaged: Yes

Enhanced Support: Yes

< Memory Module >

Manufacturer: Corsair

Model: CMX6GX3M3A1333C9

Type: 2GB DIMM DDR3

Technology: 8x(2048Mx8)

Speed: PC3-10700U DDR3-1334

Standard Timings: 9-9-9-24 5-34-10-5

Version: 1.00

Memory DC Line: 1.500V

Timing @ 667MHz: 9-9-9-24 5-34-10-5

Timing @ 593MHz: 8-8-8-21 4-30-9-4

Timing @ 519MHz: 7-7-7-19 4-26-8-4

Timing @ 444MHz: 6-6-6-16 3-23-7-3

< Memory Module >

Manufacturer: Corsair

Model: CMX6GX3M3A1333C9

Type: 2GB DIMM DDR3

Technology: 8x(2048Mx8)

Speed: PC3-10700U DDR3-1334

Standard Timings: 9-9-9-24 5-34-10-5

Version: 1.00

Memory DC Line: 1.500V

Timing @ 667MHz: 9-9-9-24 5-34-10-5

Timing @ 593MHz: 8-8-8-21 4-30-9-4

Timing @ 519MHz: 7-7-7-19 4-26-8-4

Timing @ 444MHz: 6-6-6-16 3-23-7-3

< Memory Module >

Manufacturer: Corsair

Model: CMX6GX3M3A1333C9

Type: 2GB DIMM DDR3

Technology: 8x(2048Mx8)

Speed: PC3-10700U DDR3-1334

Standard Timings: 9-9-9-24 5-34-10-5

Version: 1.00

Memory DC Line: 1.500V

Timing @ 667MHz: 9-9-9-24 5-34-10-5

Timing @ 593MHz: 8-8-8-21 4-30-9-4

Timing @ 519MHz: 7-7-7-19 4-26-8-4

Timing @ 444MHz: 6-6-6-16 3-23-7-3

 

 

Det er ingen tvil om at 6Gb i dag er temmelig lite (maskina brukes til 3D-modellering, bildebehandling og andre tunge ting). Så da er mitt spørsmål: Finnes det "bedre" minnebrikker, tweaks i BIOS etc. som kan gjøre konfigurasjonen bedre?

[kjelle392]

Ja her var det overveldende respons....

[ei57]

Det er vel slik at minnehastighet er en funksjon av BCLK og memory divider. Det SiSoft Sandra lister opp, blir svada i denne sammenheng. Kanskje derav liten respons.