Hvilket BIOS innstilingere bør jeg ha? Har 9700np

[hwlars]

Hvilket BIOS innstilinger bør jeg ha når jeg har Abit NF7-S og Sapphire 9700np med de nyeste Omega driverene

 

Takker for svar

[hwlars]

Jeg ville hat nøtte av et svar! Ingen som vet?

[Spragleknas]

LET! Du har jo vært på omeg?

 

PERFORMANCE BIOS SETTINGS

 

 

Use this settings in your BIOS along with the OMEGA drivers to get the best performance possible out of your video card (this settings are not avaiable in all motherboards, use only the ones that fit your BIOS):

 

Fast Gate A20 Option : ENABLED

Video BIOS shadowing : DISABLED

Video BIOS cacheable : DISABLED

xxxxx - xxxxx Shadow : ALL DISABLED

IDE prefetch mode : ENABLED

Init Display First : AGP or PCI (SELECT YOUR CARD TYPE)

IDE HDD Block Mode : ENABLED

IDE 32-bit transfer mode : ENABLED

Assign IRQ for USB : DISABLED (UNLESS YOU USE USB DEVICES)

Assign IRQ for VGA : ENABLED

PCI/VGA palette snoop : DISABLED

PNP OS Installed : ENABLED (UNLESS YOU WANT TO MANUALLY ASSIGN IRQ's)

Resource Controlled By : AUTO (UNLESS YOU WANT TO MANUALLY ASSIGN IRQs AND DMAs)

AGP aperture size : 128

AGP master 1 WS write : ENABLED***

AGP master 1 WS read : ENABLED***

Bank 0/1, 2/3 DRAM timing : TURBO***

CPU to PCI write buffer : ENABLED

Delayed Transaction : ENABLED

DRAM speculative leadoff : ENABLED***

DRAM Data Integrity Mode : NON-ECC (UNLESS YOU HAVE ECC MEMORY)

Delay DRAM read latch : (THE LOWER, THE FASTER)***

Fast writes : DISABLED

Memory parity/ECC check : DISABLED***

Passive Release : ENABLED

PCI Concurrency : ENABLED

PCI master 0 WS write : ENABLED***

RAS active time : (THE LOWER, THE FASTER)***

RAS to CAS delay : (THE LOWER, THE FASTER)**

Read around write : ENABLED

SDRAM Bank Interleave : 4-bank/way

SDRAM CAS Latency Time : 2**

SDRAM cycle length : 2**

SDRAM Precharge control : ENABLED

Spread spectrum (modulation): DISABLED

System BIOS cacheable : DISABLED

Video RAM cacheable : DISABLED

8 bit I/O Recovery Time : 1

16 bit I/O Recovery Time : 1

Turbo frequency : ENABLED

 

** = ONLY IF YOUR MEMORY SUPPORT IT, OTHERWISE USE THE NEXT

HIGHER VALUE

 

*** = WILL IMPROVE SPEED BUT DECREASES STABILITY, IF YOU HAVE

PROBLEMS CHANGE IT

 

Well, that's all for the BIOS.

This settings should increase you framerates with your video card, if you want do a benchmark before and after the changes, it will give you a good idea of the gain obtained.

 

Good Luck!

 

[hwlars]

bør jeg andre noe fra de siden jeg har Abit NF7-S

[Spragleknas]

Bare les du!

this settings are not avaiable in all motherboards, use only the ones that fit your BIOS

 

EDIT: I rest my case (eller: nå svarer jeg ikke mer. Vær fonøyd, alt står jo der... noe til og med to ganger ...)