[Løst] Ubuntu 9.10(AMD64) + Asus M4A78T-E = Finner ingen sensor

[hnnashikama]

Oppsett:

RAM: Kingston ValueRam 2x2GB

GPU: XFX Radeon HD4870 1GB

CPU: AMD Athlon 2 X4 620

HovedKort: Asus M4A78T-E

Power Supply: Corsair VX550W

OS: Ubuntu 9.10(AMD64)

 

Først vil jeg bare si at jeg er ganske fersk når det gjelder GNU/Linux, har fikla litt med det, men ikke forvent altfor mye av meg.

 

Jeg har lyst å overvåke temperaturen på systemet mitt, men jeg finner ingen sensorer.

 

Har installert Computer Temperature Monitor, men den finner heller ingen sensore.

 

Har testet lm-sensors med denne metoden. Vet at den er gamme, men den burde fungere.

 

Har sett at noen med et ulikt hk har brukt noe "modprobe" greier, men aner ikke hvordan jeg skal gå fram for å finne ut av det.

 

Har også testet å putte "GRUB_CMDLINE_LINUX="acpi_enforce_resources=lac" i "/etc/default/grub" uten hell.

 

Hittil har jeg ikke kommet noen vei.

 

Setter pris på all input dere måtte komme med.

Endret 25. november 2009 av hnnashikama

[flyndrefjes]

Finner du temperaturen på CPU-en under /proc/acpi/thermal_zone/THRM ?

 

cat /proc/acpi/thermal_zone/THRM/temperature

 

edit: jeg ser i etterkant at det kan være forskjellige navn på disse sensorene (selvfølgelig). Men sensorene ser ut til å befinne seg under mappen /proc/acpi/thermal_zone/

Endret 26. november 2009 av flyndrefjes

[hnnashikama]

Finner du temperaturen på CPU-en under /proc/acpi/thermal_zone/THRM ?

 

cat /proc/acpi/thermal_zone/THRM/temperature

 

edit: jeg ser i etterkant at det kan være forskjellige navn på disse sensorene (selvfølgelig). Men sensorene ser ut til å befinne seg under mappen /proc/acpi/thermal_zone/

 

Det finnes ingen undermapper under "/proc/acpi/thermal_zone/" mappen er tom med andre ord.

 

Andre forslag ?

[oj88]

Kjør "sudo sensors-detect" og paste output du får på slutten.

[hnnashikama]

Kjør "sudo sensors-detect" og paste output du får på slutten.

daniel@downsideup:~/Desktop$ sudo sensers-detect

[sudo] password for daniel:

sudo: sensers-detect: command not found

daniel@downsideup:~/Desktop$ sudo sensors-detect

# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)

 

This program will help you determine which kernel modules you need

to load to use lm_sensors most effectively. It is generally safe

and recommended to accept the default answers to all questions,

unless you know what you're doing.

 

We can start with probing for (PCI) I2C or SMBus adapters.

Do you want to probe now? (YES/no): y

Probing for PCI bus adapters...

Use driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600 SMBus

 

We will now try to load each adapter module in turn.

Module `i2c-piix4' already loaded.

If you have undetectable or unsupported I2C/SMBus adapters, you can have

them scanned by manually loading the modules before running this script.

 

To continue, we need module `i2c-dev' to be loaded.

Do you want to load `i2c-dev' now? (YES/no): y

Module loaded successfully.

 

We are now going to do the I2C/SMBus adapter probings. Some chips may

be double detected; we choose the one with the highest confidence

value in that case.

If you found that the adapter hung after probing a certain address,

you can specify that address to remain unprobed.

 

Next adapter: SMBus PIIX4 adapter at 0b00 (i2c-0)

Do you want to scan it? (YES/no/selectively): y

yClient found at address 0x50

Probing for `Analog Devices ADM1033'... No

Probing for `Analog Devices ADM1034'... No

Probing for `SPD EEPROM'... No

Probing for `EDID EEPROM'... No

Client found at address 0x51

Probing for `Analog Devices ADM1033'... No

Probing for `Analog Devices ADM1034'... No

Probing for `SPD EEPROM'... No

Probing for `EDID EEPROM'... No

 

Some chips are also accessible through the ISA I/O ports. We have to

write to arbitrary I/O ports to probe them. This is usually safe though.

Yes, you do have ISA I/O ports even if you do not have any ISA slots!

Do you want to scan the ISA I/O ports? (YES/no): y

Probing for `National Semiconductor LM78' at 0x290... No

Probing for `National Semiconductor LM78-J' at 0x290... No

Probing for `National Semiconductor LM79' at 0x290... No

Probing for `Winbond W83781D' at 0x290... No

Probing for `Winbond W83782D' at 0x290... No

Probing for `IPMI BMC KCS' at 0xca0... No

Probing for `IPMI BMC SMIC' at 0xca8... No

 

Some Super I/O chips may also contain sensors. We have to write to

standard I/O ports to probe them. This is usually safe.

Do you want to scan for Super I/O sensors? (YES/no): y

Probing for Super-I/O at 0x2e/0x2f

Trying family `National Semiconductor'... No

Trying family `SMSC'... No

Trying family `VIA/Winbond/Fintek'... No

Trying family `ITE'... Yes

Found unknown chip with ID 0x8720

(logical device 4 has address 0x290, could be sensors)

Probing for Super-I/O at 0x4e/0x4f

Trying family `National Semiconductor'... No

Trying family `SMSC'... No

Trying family `VIA/Winbond/Fintek'... No

Trying family `ITE'... No

 

Some south bridges, CPUs or memory controllers may also contain

embedded sensors. Do you want to scan for them? (YES/no): y

Silicon Integrated Systems SIS5595... No

VIA VT82C686 Integrated Sensors... No

VIA VT8231 Integrated Sensors... No

AMD K8 thermal sensors... No

AMD K10 thermal sensors... Success!

(driver `to-be-written')

Intel Core family thermal sensor... No

Intel AMB FB-DIMM thermal sensor... No

 

Now follows a summary of the probes I have just done.

Just press ENTER to continue:

 

Driver `to-be-written' (should be inserted):

Detects correctly:

* Chip `AMD K10 thermal sensors' (confidence: 9)

 

I will now generate the commands needed to load the required modules.

Just press ENTER to continue:

 

To load everything that is needed, add this to /etc/modules:

 

#----cut here----

# Chip drivers

# no driver for AMD K10 thermal sensors yet

#----cut here----

 

Do you want to add these lines automatically? (yes/NO)n

[hnnashikama]

http://blog.morrigan.ch/?p=9&cpage=1#comment-1451