del_diablo Skrevet 5. juli 2009 Del Skrevet 5. juli 2009 delly@delly-laptop:~$ sudo startx --verbose=yes [sudo] password for delly: X: warning; process set to priority -1 instead of requested priority 0 X.Org X Server 1.6.0 Release Date: 2009-2-25 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-23-server i686 Ubuntu Current Operating System: Linux delly-laptop 2.6.28-13-generic #45-Ubuntu SMP Tue Jun 30 19:49:51 UTC 2009 i686 Build Date: 09 April 2009 02:10:02AM xorg-server 2:1.6.0-0ubuntu14 ([email protected]) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 5 19:59:11 2009 (==) Using config file: "/etc/X11/xorg.conf" (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM [dri] Disabling DRI. XRANDR name: LVDS Connector: LVDS LCD1: INTERNAL_KLDSCP_LVTMA DDC reg: 0x7e40 XRANDR name: VGA-0 Connector: VGA CRT1: INTERNAL_KLDSCP_DAC1 DDC reg: 0x7e60 XRANDR name: HDMI-0 Connector: HDMI-B DFP1: INTERNAL_UNIPHY DDC reg: 0x7e20 finished output detect: 0 Dac detection success finished output detect: 1 invalid output device for dac detection finished output detect: 2 finished all detect before xf86InitialConfiguration Dac detection success invalid output device for dac detection after xf86InitialConfiguration Output DIG dpms success Blank CRTC 0 success Disable CRTC 0 success Disable CRTC memreq 0 success Blank CRTC 1 success Disable CRTC 1 success Disable CRTC memreq 1 success mc fb loc is 00df00c0 (EE) RADEON(0): Acceleration initialization failed Output DIG dpms success Output CRT1 disable success Output DIG dpms success Blank CRTC 0 success Disable CRTC 0 success Disable CRTC memreq 0 success Blank CRTC 1 success Disable CRTC 1 success Disable CRTC memreq 1 success Output DIG dpms success Blank CRTC 0 success Disable CRTC 0 success Disable CRTC memreq 0 success Mode 1280x800 - 1408 816 10 freq: 68900000 best_freq: 68900000 best_feedback_div: 689 best_ref_div: 18 best_post_div: 15 Set CRTC 0 PLL success Set CRTC Timing success Set CRTC 0 Overscan success Not using RMX scaler 0 setup success Set CRTC 0 Source success crtc 0 YUV disable setup success Output DIG2 encoder setup success Output DIG0 transmitter setup success Output DIG dpms success Enable CRTC memreq 0 success Enable CRTC 0 success Unblank CRTC 0 success Output CRT1 disable success Output DIG dpms success Blank CRTC 1 success Disable CRTC 1 success Disable CRTC memreq 1 success /usr/bin/X11/X: symbol lookup error: /usr/lib/xorg/modules/extensions//libdri.so: undefined symbol: atiddxAbiDixLookupPrivate giving up. xinit: Connection refused (errno 111): unable to connect to X server xinit: No such process (errno 3): Server error. delly@delly-laptop:~$ Ved starting av xorg(som sett ovenfra) går det til helvete. Hal går ned, input og output på PC'n dør ut. Men ssh fungerer fortsatt. På denne blackboxen: delly@delly-laptop:~$ lspci00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller 02:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series 02:00.1 Audio device: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series] 08:00.0 Network controller: RaLink RT2860 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 0a:00.0 FireWire (IEEE 1394): JMicron Technologies, Inc. IEEE 1394 Host Controller 0a:00.1 System peripheral: JMicron Technologies, Inc. SD/MMC Host Controller 0a:00.2 SD Host controller: JMicron Technologies, Inc. Standard SD Host Controller 0a:00.3 System peripheral: JMicron Technologies, Inc. MS Host Controller 0a:00.4 System peripheral: JMicron Technologies, Inc. xD Host Controller 2 stk GPU, den ene skal liksom ikke bruke strøm mens den andre er en hd 3460. Laptop. Lenke til kommentar
Del Skrevet 5. juli 2009 Del Skrevet 5. juli 2009 Den klager på skjermkortdriver. Hvilken driver bruker du? Sjekk i xorg: grep Driver /etc/X11/xorg.conf Lenke til kommentar
jonnor Skrevet 5. juli 2009 Del Skrevet 5. juli 2009 (endret) /usr/bin/X11/X: symbol lookup error: /usr/lib/xorg/modules/extensions//libdri.so: undefined symbol: atiddxAbiDixLookupPrivate giving up. Ser ut som du har feil driver eller en bug. Endret 5. juli 2009 av jonnor Lenke til kommentar
del_diablo Skrevet 6. juli 2009 Forfatter Del Skrevet 6. juli 2009 Ok, fant ut av det. Reinstallerte driverne via synaptic, etter å ha purga dem. Halve problemet er at "aticonfig --inital" eller noen som helst form for config ikke ble dratt i gang ved install, noe som etterlot en ødelagt config til xorg(fant også ut at xfix dreper configs). Takk for hjelpen Lenke til kommentar
Anbefalte innlegg
Opprett en konto eller logg inn for å kommentere
Du må være et medlem for å kunne skrive en kommentar
Opprett konto
Det er enkelt å melde seg inn for å starte en ny konto!
Start en kontoLogg inn
Har du allerede en konto? Logg inn her.
Logg inn nå