Kongeskipet Skrevet 11. mai 2009 Del Skrevet 11. mai 2009 (endret) Har problemer i WinXP på Dell-laptopen min som ikke funger med linux. Tenkte derfor å installere Win7. Lastet ned ISO og åpnet i Brasero som jeg alltid har gjort. Første forsøk fikk jeg feilmelding kort tid etter den begynte. Andre gangen fikk jeg feilmelding da den var ferdig med å brenne og begynte kontrollere for feil (tror jeg, fulgte ikke med). Tredje gangen fikk jeg feilmelding når bare 3 MB var skrevet. Tror ikke det er hardware-relatert. DVD-brenneren har alltid fungert tidligere, men har ikke brent ut ISO siden jeg oppgraderte til ubuntu 9.04 Har selvfølgelig funnet ny DVD-plate for hver gang. Noen som kan tyde hva som er feilen? Kan det hjelpe å installere et annet brenneprogram? 2. forsøk Checking session consistency (brasero_burn_check_session_consistency burn.c:1905) BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_set_output_size_for_current_track BraseroBurnURI stopping BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_session_output_size BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_U5SSTU.bin toc = none BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_current_track BraseroBurnURI called brasero_job_get_input_type BraseroBurnURI no burn:// URI found BraseroBurnURI stopping BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim got varg: BraseroWodim deactivating BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_get_device BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_speed BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_input_type BraseroWodim called brasero_job_get_fd_in BraseroWodim called brasero_job_get_current_track BraseroWodim called brasero_job_set_current_action BraseroWodim got varg: wodim -v dev=/dev/sr0 speed=8 driveropts=burnfree -dao fs=16m -data -nopad /home/rune/ISO/7100.0.090421-1700_x86fre_client_en-us_retail_ultimate-grc1culfrer_en_dvd.iso BraseroWodim Launching command BraseroWodim called brasero_job_get_fd_out BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: devname: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: scsibus: -2 target: -2 lun: -2 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Linux sg driver version: 3.5.27 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Wodim version: 1.1.9 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: SCSI buffer size: 64512 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device BraseroWodim called brasero_job_get_flags BraseroWodim stderr: communication breaks or freezes immediately after that. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: TOC Type: 1 = CD-ROM BraseroWodim stderr: Speed set to 8467 KB/s BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Driveropts: 'burnfree' BraseroWodim stdout: Device type : Removable CD-ROM BraseroWodim stdout: Version : 5 BraseroWodim stdout: Response Format: 2 BraseroWodim stdout: Capabilities : BraseroWodim stdout: Vendor_info : '_NEC ' BraseroWodim stdout: Identification : 'DVD_RW ND-3500AG' BraseroWodim stdout: Revision : '2.86' BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW. BraseroWodim stdout: Current: 0x0011 (DVD-R sequential recording) BraseroWodim stdout: Profile: 0x002B (DVD+R/DL) BraseroWodim stdout: Profile: 0x001B (DVD+R) BraseroWodim stdout: Profile: 0x001A (DVD+RW) BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording) BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite) BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording) (current) BraseroWodim stdout: Profile: 0x0010 (DVD-ROM) BraseroWodim stdout: Profile: 0x000A (CD-RW) BraseroWodim stdout: Profile: 0x0009 (CD-R) BraseroWodim stdout: Profile: 0x0008 (CD-ROM) BraseroWodim stdout: Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). BraseroWodim stdout: Driver flags : SWABAUDIO BURNFREE BraseroWodim stdout: Supported modes: PACKET SAO BraseroWodim stdout: Drive buf size : 1769472 = 1728 KB BraseroWodim stdout: FIFO size : 16777216 = 16384 KB BraseroWodim stdout: Track 01: data 2413 MB BraseroWodim stdout: Total size: 2772 MB (274:37.70) = 1235828 sectors BraseroWodim stdout: Lout start: 2772 MB (274:39/53) = 1235828 sectors BraseroWodim stdout: Current Secsize: 2048 BraseroWodim stdout: HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. BraseroWodim stdout: Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1062668 BraseroWodim stdout: Starting to write CD/DVD at speed 6.0 in real SAO mode for single session. BraseroWodim stdout: Last chance to quit, starting real write in 4 seconds. BraseroWodim called brasero_job_set_dangerous BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 3 seconds. BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 2 seconds. BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 1 seconds. 0 seconds. Operation starts. BraseroWodim stdout: Waiting for reader process to fill input buffer ... input buffer ready. BraseroWodim stdout: Performing OPC... BraseroWodim stdout: Sending CUE sheet... BraseroWodim called brasero_job_get_input_type BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Starting new track at sector: 0 BraseroWodim stdout: BraseroWodim stdout: Track 01: 0 of 2413 MB written. BraseroWodim stdout: Track 01: 1 of 2413 MB written (fifo 100%) [buf 60%] 0.0x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 2 of 2413 MB written (fifo 99%) [buf 97%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 3 of 2413 MB written (fifo 99%) [buf 97%] 4.4x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 4 of 2413 MB written (fifo 99%) [buf 97%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 5 of 2413 MB written (fifo 99%) [buf 21%] 1.4x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 6 of 2413 MB written (fifo 98%) [buf 79%] 1.4x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 7 of 2413 MB written (fifo 99%) [buf 97%] 6.5x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 8 of 2413 MB written (fifo 99%) [buf 97%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 9 of 2413 MB written (fifo 99%) [buf 97%] 4.3x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 10 of 2413 MB written (fifo 99%) [buf 97%] 4.3x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 11 of 2413 MB written (fifo 100%) [buf 97%] 4.4x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 12 of 2413 MB written (fifo 100%) [buf 97%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 13 of 2413 MB written (fifo 100%) [buf 97%] 4.4x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 14 of 2413 MB written (fifo 99%) [buf 97%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 15 of 2413 MB written (fifo 99%) [buf 97%] 4.3x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 16 of 2413 MB written (fifo 99%) [buf 97%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 17 of 2413 MB written (fifo 100%) [buf 97%] 4.3x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 18 of 2413 MB written (fifo 100%) [buf 96%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 19 of 2413 MB written (fifo 100%) [buf 96%] 4.3x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 20 of 2413 MB written (fifo 100%) [buf 96%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 21 of 2413 MB written (fifo 100%) [buf 95%] 4.3x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 22 of 2413 MB written (fifo 99%) [buf 96%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 23 of 2413 MB written (fifo 100%) [buf 96%] 4.3x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 24 of 2413 MB written (fifo 100%) [buf 96%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 25 of 2413 MB written (fifo 99%) [buf 96%] 4.3x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 26 of 2413 MB written (fifo 100%) [buf 96%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 27 of 2413 MB written (fifo 100%) [buf 94%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 28 of 2413 MB written (fifo 99%) [buf 96%] 4.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 29 of 2413 MB written (fifo 100%) [buf 96%] 4.3x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 30 of 2413 MB written (fifo 99%) [buf 96%] 4.1x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 31 of 2413 MB written (fifo 100%) [buf 96%] 4.3x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 32 of 2413 MB written (fifo 99%) [buf 96%] 4.1x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 33 of 2413 MB written (fifo 99%) [buf 97%] 4.4x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stderr: Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error BraseroWodim called brasero_job_get_flags BraseroWodim stderr: CDB: 2A 00 00 00 44 A9 00 00 1F 00 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: status: 0x2 (CHECK CONDITION) BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Bytes: 72 0B 47 00 00 00 00 0E 09 0C 00 00 00 00 00 00 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Key: 0x7 Data Protect, Segment 11 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense flags: Blk 0 (not valid) end of medium BraseroWodim called brasero_job_get_flags BraseroWodim stderr: cmd finished after 5.955s timeout 200s BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: A write error occured. BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: Please properly read the error message above. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Track 01: 34 of 2413 MB written (fifo 100%) [buf 97%] 4.4x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: write track data: error after 35997696 bytes BraseroWodim stdout: Writing time: 54.520s BraseroWodim stdout: Average write speed 49.8x. BraseroWodim stdout: Min drive buffer fill was 21% BraseroWodim stdout: Fixating... BraseroWodim called brasero_job_set_current_action BraseroWodim stderr: Errno: 5 (Input/output error), flush cache scsi sendcmd: no error BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Trouble flushing the cache BraseroWodim stderr: CDB: 35 00 00 00 00 00 00 00 00 00 BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Fixating time: 210.851s BraseroWodim stderr: status: 0x2 (CHECK CONDITION) BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Key: 0x0 No Additional Sense, Segment 11 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense flags: Blk 0 (not valid) BraseroWodim called brasero_job_get_flags BraseroWodim stderr: cmd finished after 210.851s timeout 200s BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: Cannot fixate disk. BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_error BraseroWodim finished with an error BraseroWodim asked to stop because of an error error = 12 message = "An error occured while writing to disc" BraseroWodim stopping BraseroWodim got killed Session error : An error occured while writing to disc (brasero_burn_record burn.c:2599) 3. forsøk Checking session consistency (brasero_burn_check_session_consistency burn.c:1905) BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_set_output_size_for_current_track BraseroBurnURI stopping BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_session_output_size BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_NJ3GTU.bin toc = none BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_current_track BraseroBurnURI called brasero_job_get_input_type BraseroBurnURI no burn:// URI found BraseroBurnURI stopping BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim got varg: BraseroWodim deactivating BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_get_device BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_speed BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_input_type BraseroWodim called brasero_job_get_fd_in BraseroWodim called brasero_job_get_current_track BraseroWodim called brasero_job_set_current_action BraseroWodim got varg: wodim -v dev=/dev/sr0 -dummy speed=2 driveropts=burnfree -dao fs=16m -data -nopad /home/rune/ISO/7100.0.090421-1700_x86fre_client_en-us_retail_ultimate-grc1culfrer_en_dvd.iso BraseroWodim Launching command BraseroWodim called brasero_job_get_fd_out BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: devname: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: scsibus: -2 target: -2 lun: -2 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Linux sg driver version: 3.5.27 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Wodim version: 1.1.9 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: SCSI buffer size: 64512 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device BraseroWodim called brasero_job_get_flags BraseroWodim stderr: communication breaks or freezes immediately after that. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: TOC Type: 1 = CD-ROM BraseroWodim stdout: Driveropts: 'burnfree' BraseroWodim stdout: Device type : Removable CD-ROM BraseroWodim stdout: Version : 5 BraseroWodim stdout: Response Format: 2 BraseroWodim stdout: Capabilities : BraseroWodim stdout: Vendor_info : '_NEC ' BraseroWodim stdout: Identification : 'DVD_RW ND-3500AG' BraseroWodim stdout: Revision : '2.86' BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW. BraseroWodim stdout: Current: 0x0011 (DVD-R sequential recording) BraseroWodim stdout: Profile: 0x002B (DVD+R/DL) BraseroWodim stdout: Profile: 0x001B (DVD+R) BraseroWodim stdout: Profile: 0x001A (DVD+RW) BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording) BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite) BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording) (current) BraseroWodim stdout: Profile: 0x0010 (DVD-ROM) BraseroWodim stdout: Profile: 0x000A (CD-RW) BraseroWodim stdout: Profile: 0x0009 (CD-R) BraseroWodim stdout: Profile: 0x0008 (CD-ROM) BraseroWodim stdout: Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). BraseroWodim stdout: Driver flags : SWABAUDIO BURNFREE BraseroWodim stdout: Supported modes: PACKET SAO BraseroWodim stdout: Drive buf size : 1769472 = 1728 KB BraseroWodim stdout: FIFO size : 16777216 = 16384 KB BraseroWodim stderr: Speed set to 2822 KB/s BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Track 01: data 2413 MB BraseroWodim stdout: Total size: 2772 MB (274:37.70) = 1235828 sectors BraseroWodim stdout: Lout start: 2772 MB (274:39/53) = 1235828 sectors BraseroWodim stdout: Current Secsize: 2048 BraseroWodim stdout: HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. BraseroWodim stdout: Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1062668 BraseroWodim stdout: Starting to write CD/DVD at speed 2.0 in dummy SAO mode for single session. BraseroWodim stdout: Last chance to quit, starting dummy write in 4 seconds. BraseroWodim called brasero_job_set_dangerous BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 3 seconds. BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 2 seconds. BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 1 seconds. 0 seconds. Operation starts. BraseroWodim stdout: Waiting for reader process to fill input buffer ... input buffer ready. BraseroWodim stdout: Sending CUE sheet... BraseroWodim called brasero_job_get_input_type BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Starting new track at sector: 0 BraseroWodim stdout: BraseroWodim stdout: Track 01: 0 of 2413 MB written. BraseroWodim stdout: Track 01: 1 of 2413 MB written (fifo 98%) [buf 60%] 0.0x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 2 of 2413 MB written (fifo 100%) [buf 97%] 2.6x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 01: 3 of 2413 MB written (fifo 99%) [buf 97%] 2.2x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stderr: Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error BraseroWodim called brasero_job_get_flags BraseroWodim stderr: CDB: 2A 00 00 00 09 72 00 00 1F 00 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: status: 0x2 (CHECK CONDITION) BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Bytes: 72 0B 47 00 00 00 00 0E 09 0C 00 00 00 00 00 00 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Key: 0x7 Data Protect, Segment 11 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense flags: Blk 0 (not valid) end of medium BraseroWodim called brasero_job_get_flags BraseroWodim stderr: cmd finished after 11.685s timeout 200s BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: A write error occured. BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: Please properly read the error message above. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Track 01: 4 of 2413 MB written (fifo 100%) [buf 97%] 2.1x. BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: write track data: error after 4952064 bytes BraseroWodim stdout: Writing time: 55.591s BraseroWodim stdout: Average write speed 33.0x. BraseroWodim stdout: Min drive buffer fill was 97% BraseroWodim stdout: Fixating... BraseroWodim called brasero_job_set_current_action BraseroWodim stderr: Errno: 5 (Input/output error), flush cache scsi sendcmd: no error BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Trouble flushing the cache BraseroWodim stderr: CDB: 35 00 00 00 00 00 00 00 00 00 BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Fixating time: 210.943s BraseroWodim stderr: status: 0x2 (CHECK CONDITION) BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Key: 0x0 No Additional Sense, Segment 11 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense flags: Blk 0 (not valid) BraseroWodim called brasero_job_get_flags BraseroWodim stderr: cmd finished after 210.943s timeout 200s BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: fifo had 333 puts and 79 gets. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: HUP BraseroWodim stderr: wodim: fifo was 0 times empty and 51 times full, min fill was 95%. BraseroWodim called brasero_job_get_flags BraseroWodim stderr: HUP BraseroWodim process finished with status 254 BraseroWodim called brasero_job_error BraseroWodim finished with an error BraseroWodim asked to stop because of an error error = 0 message = "no message" BraseroWodim stopping BraseroWodim got killed Session error : unknown (brasero_burn_record burn.c:2602) Tar gjerne imot forklaring på hvordan jeg kan lage spoilertekst Edit: Endret tittelen siden det gjelder brenning av ISO generelt. Endret 12. mai 2009 av -TuX- Lagt til spoiler :) Lenke til kommentar
cmyrland Skrevet 11. mai 2009 Del Skrevet 11. mai 2009 Litt simpel sjekkliste kanskje, men kan være verdt det: -Har du sjekket launchpad for bugreports? -Har du sjekka at ikke win7-isoen er ødelagt? md5 checksum? -Har du prøvd å brenne en annen iso-fil? -Står maskina på nettstrøm, dersom det er en laptop? Om ja på alle; -Prøv å slepe ned K3B og brenn der. Fremdeles error - saksøk DVD-romen din, hvis ikke error - post bugreport Lenke til kommentar
Kongeskipet Skrevet 11. mai 2009 Forfatter Del Skrevet 11. mai 2009 -Har du sjekket launchpad for bugreports? fant denne: https://bugs.launchpad.net/ubuntu/+bug/369192 ser ut som det er problem med driver. -Har du sjekka at ikke win7-isoen er ødelagt? md5 checksum?Sjekker ikke brenneprogrammet md5 checksum automatisk? -Har du prøvd å brenne en annen iso-fil?Samme feilen kom da jeg forsøkte å brenne puppy ut på cd. (si ifra om du vill se den lange feilmeldinga) -Står maskina på nettstrøm, dersom det er en laptop?Stasjonær. -Prøv å slepe ned K3B og brenn der. Fremdeles errorFeilmelding der også Fremdeles error - saksøk DVD-romen din.Kan nok ikke det, fikk den brukt. Det rare er at den har fungert absolutt ALLE gangene før jeg oppdaterte til 9.04. Har bent ut vanlig DVD et par ganger og det funket fint. Takk for den nyttige listen. Lenke til kommentar
Sokkalf™ Skrevet 12. mai 2009 Del Skrevet 12. mai 2009 Sjekker ikke brenneprogrammet md5 checksum automatisk? Godt mulig den beregner en md5sum, men brenneprogrammet vet jo ikke hvilken som er riktig. Sammenlign den med den riktige. Lenke til kommentar
jonnor Skrevet 12. mai 2009 Del Skrevet 12. mai 2009 Det rare er at den har fungert absolutt ALLE gangene før jeg oppdaterte til 9.04. Har bent ut vanlig DVD et par ganger og det funket fint. Takk for den nyttige listen. Regresjoner skjer. Bekreft buggen på Launchpad er du snill, og legg ved logger samt info om hardware der. Lenke til kommentar
Kongeskipet Skrevet 12. mai 2009 Forfatter Del Skrevet 12. mai 2009 (endret) Prøvde å boote mint linux fra live-cd, som er basert på Ubuntu 8.10 der det fungerte tidligere. Før den begynte å brenne fikk jeg en melding med denne md5 checksum-en 8867c13330f56a93944bcd46dcd73590, Hvor kan jeg sjekke om md5 checksum er riktig? Litt etter den begynte å brenne fikk jeg denne feilmeldingen There was an error writing to the disc: Unhandled error, aborting Edit: La inn det jeg ikke fant på amerikansk tastaturoppsett. Endret 12. mai 2009 av -TuX- Lenke til kommentar
Sokkalf™ Skrevet 12. mai 2009 Del Skrevet 12. mai 2009 Google forteller meg at md5sum'en du har er riktig, så da er det ikke noe galt med ISOen din. Lenke til kommentar
Kongeskipet Skrevet 12. mai 2009 Forfatter Del Skrevet 12. mai 2009 (endret) Erklærer denne tråden for løst. Det ikke var linux-relatert, men hardware-relatert. Fant ut at sist gang det fungerte var før jeg satte inn en ekstra DVD-spiller som slave (DVD-brenneren har alltid vært master). Da jeg satte DVD-brenneren i en annen data som også kjører Ubuntu 9.04, og brente ut den samme ISO-filen (ved fildeling) fungerte det på første forsøk Synes da det er rart at ikke M$ har lagt inn støtte for å formatere ext3 til deres filsystem, brukte Mint Linux live-cd til den jobben. Og ja, jeg har selvfølgelig satt av en partisjon til linux Edit: Innlegg nummer 50 Endret 12. mai 2009 av -TuX- Lenke til kommentar
Anbefalte innlegg
Opprett en konto eller logg inn for å kommentere
Du må være et medlem for å kunne skrive en kommentar
Opprett konto
Det er enkelt å melde seg inn for å starte en ny konto!
Start en kontoLogg inn
Har du allerede en konto? Logg inn her.
Logg inn nå