Bsod stop 124

[Fritz_hansen]

Heisann!!

 

Har en maskin som har vert lite samarbeidsvillig i d siste, opplever stadig Bsod og dette flere ganger daglig. Noen ganger får jeg bsod andre ganger blir bare bildet svart og maskinen restarter. Dette kan skje når som helt, mens jeg booter,mens jeg spiller/surfer på nettet, til og med mens maskinen står på uten å være i bruk. Har nettopp formatert maskinen uten at d hjalp noe.Dette er en maskin som har fungert helt perfekt i over et år til nå nylig. Skermkortet er nytt så d er d heller ikke. Noen som har noen innspill om hvor feilen kan ligge?

 

får denne feilmelding

 

Problemsignatur:

Navn på problemhendelse: BlueScreen

OS-versjon: 6.0.6001.2.1.0.768.3

ID for nasjonal innstilling: 1044

 

Tilleggsinformasjon om problemet:

BCCode: 124

BCP1: 00000000

BCP2: 84058028

BCP3: F2000040

BCP4: 00000800

OS Version: 6_0_6001

Service Pack: 1_0

Product: 768_1

[Torsph]

et søk på google....

 

http://forums.techarena.in/vista-help/723724.htm

 

Vet ikke om det løser problemet, men kan hjelpe.

Endret 14. desember 2008 av NeXz

[Spirre]

er maskina overklokka?

 

hvis ja, prøv å reset bios til standard innstillinger.

 

sjekk også vifter og kjølere for støv, dersom den blir for varm så kan du fort få de problemene du nevner.

[snippsat]

C:\windows\minidump\ <--- dmp-filer,last opp filer her Rapidshare

Post link,så skal jeg se på dem i debugger.

Endret 14. desember 2008 av SNIPPSAT

[Fritz_hansen]

her har du noen dumpfiler

 

http://rapidshare.com/files/173426878/Mini121308-02.dmp.html

http://rapidshare.com/files/173426930/Mini121308-03.dmp.html

http://rapidshare.com/files/173426988/Mini121308-04.dmp.html

http://rapidshare.com/files/173427031/Mini121308-05.dmp.html

http://rapidshare.com/files/173427092/Mini121308-06.dmp.html

 

er utrolig takknemelig for all hjelp.

[snippsat]

Det ser ut som feilen kommer fra cpu.

 

Hele debugging.

 

 

 

Microsoft ® Windows Debugger Version 6.9.0003.113 X86

Copyright © Microsoft Corporation. All rights reserved.

 

 

Loading Dump File [C:\Documents and Settings\Tom\Skrivebord\fritz\Mini121308-02.dmp]

Mini Kernel Dump File: Only registers and stack trace are available

 

Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/downloads/symbols

Executable search path is: srv*c:\symbols*http://msdl.microsoft.com/downloads/symbols

Windows Vista Kernel Version 6000 MP (4 procs) Free x86 compatible

Product: WinNt, suite: TerminalServer SingleUserTS Personal

Built by: 6000.16754.x86fre.vista_gdr.080917-1612

Kernel base = 0x81c00000 PsLoadedModuleList = 0x81d08ad0

Debug session time: Sat Dec 13 00:39:20.234 2008 (GMT+1)

System Uptime: 0 days 0:00:25.937

Loading Kernel Symbols

..........................................................................................

................

Loading User Symbols

Loading unloaded module list

.

*******************************************************************************

* *

* Bugcheck Analysis *

* *

*******************************************************************************

 

Use !analyze -v to get detailed debugging information.

 

BugCheck 9C, {0, 84857bf0, b2000040, 800}

 

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

 

Followup: MachineOwner

---------

 

1: kd> !analyze -v

*******************************************************************************

* *

* Bugcheck Analysis *

* *

*******************************************************************************

 

MACHINE_CHECK_EXCEPTION (9c)

A fatal Machine Check Exception has occurred.

KeBugCheckEx parameters;

x86 Processors

If the processor has ONLY MCE feature available (For example Intel

Pentium), the parameters are:

1 - Low 32 bits of P5_MC_TYPE MSR

2 - Address of MCA_EXCEPTION structure

3 - High 32 bits of P5_MC_ADDR MSR

4 - Low 32 bits of P5_MC_ADDR MSR

If the processor also has MCA feature available (For example Intel

Pentium Pro), the parameters are:

1 - Bank number

2 - Address of MCA_EXCEPTION structure

3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error

4 - Low 32 bits of MCi_STATUS MSR for the MCA bank that had the error

IA64 Processors

1 - Bugcheck Type

1 - MCA_ASSERT

2 - MCA_GET_STATEINFO

SAL returned an error for SAL_GET_STATEINFO while processing MCA.

3 - MCA_CLEAR_STATEINFO

SAL returned an error for SAL_CLEAR_STATEINFO while processing MCA.

4 - MCA_FATAL

FW reported a fatal MCA.

5 - MCA_NONFATAL

SAL reported a recoverable MCA and we don't support currently

support recovery or SAL generated an MCA and then couldn't

produce an error record.

0xB - INIT_ASSERT

0xC - INIT_GET_STATEINFO

SAL returned an error for SAL_GET_STATEINFO while processing INIT event.

0xD - INIT_CLEAR_STATEINFO

SAL returned an error for SAL_CLEAR_STATEINFO while processing INIT event.

0xE - INIT_FATAL

Not used.

2 - Address of log

3 - Size of log

4 - Error code in the case of x_GET_STATEINFO or x_CLEAR_STATEINFO

AMD64 Processors

1 - Bank number

2 - Address of MCA_EXCEPTION structure

3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error

4 - Low 32 bits of MCi_STATUS MSR for the MCA bank that had the error

Arguments:

Arg1: 00000000

Arg2: 84857bf0

Arg3: b2000040

Arg4: 00000800

 

Debugging Details:

------------------

 

NOTE: This is a hardware error. This error was reported by the CPU

via Interrupt 18. This analysis will provide more information about

the specific error. Please contact the manufacturer for additional

information about this error and troubleshooting assistance.

 

This error is documented in the following publication:

 

- IA-32 Intel® Architecture Software Developer's Manual

Volume 3: System Programming Guide

 

Bit Mask:

 

MA Model Specific MCA

O ID Other Information Error Code Error Code

VV SDP ___________|____________ _______|_______ _______|______

AEUECRC| | | |

LRCNVVC| | | |

^^^^^^^| | | |

6 5 4 3 2 1

3210987654321098765432109876543210987654321098765432109876543210

----------------------------------------------------------------

1011001000000000000000000100000000000000000000000000100000000000

 

 

VAL - MCi_STATUS register is valid

Indicates that the information contained within the IA32_MCi_STATUS

register is valid. When this flag is set, the processor follows the

rules given for the OVER flag in the IA32_MCi_STATUS register when

overwriting previously valid entries. The processor sets the VAL

flag and software is responsible for clearing it.

 

UC - Error Uncorrected

Indicates that the processor did not or was not able to correct the

error condition. When clear, this flag indicates that the processor

was able to correct the error condition.

 

EN - Error Enabled

Indicates that the error was enabled by the associated EEj bit of the

IA32_MCi_CTL register.

 

PCC - Processor Context Corrupt

Indicates that the state of the processor might have been corrupted

by the error condition detected and that reliable restarting of the

processor may not be possible.

 

BUSCONNERR - Bus and Interconnect Error BUS{LL}_{PP}_{RRRR}_{II}_{T}_err

These errors match the format 0000 1PPT RRRR IILL

 

 

 

Concatenated Error Code:

--------------------------

_VAL_UC_EN_PCC_BUSCONNERR_0

 

This error code can be reported back to the manufacturer.

They may be able to provide additional information based upon

this error. All questions regarding STOP 0x9C should be

directed to the hardware manufacturer.

 

BUGCHECK_STR: 0x9C_GenuineIntel

 

CUSTOMER_CRASH_COUNT: 2

 

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

 

PROCESS_NAME: Idle

 

CURRENT_IRQL: 2

 

LAST_CONTROL_TRANSFER: from 81f9af8b to 81caceef

 

STACK_TEXT:

8a23c4a4 81f9af8b 0000009c 00000000 84857960 nt!KeBugCheckEx+0x1e

8a23c4d4 81f9789f 8a2370c0 00000000 00000000 hal!HalpMcaExceptionHandler+0xdb

8a23c4d4 00000000 8a2370c0 00000000 00000000 hal!HalpMcaExceptionHandlerWrapper+0x77

 

 

STACK_COMMAND: kb

 

SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

 

FOLLOWUP_NAME: MachineOwner

 

MODULE_NAME: Unknown_Module

 

IMAGE_NAME: Unknown_Image

 

DEBUG_FLR_IMAGE_TIMESTAMP: 0

 

FAILURE_BUCKET_ID: 0x9C_GenuineIntel_ANALYSIS_INCONCLUSIVE

 

BUCKET_ID: 0x9C_GenuineIntel_ANALYSIS_INCONCLUSIVE

 

Followup: MachineOwner

 

Sjekk temp cpu.

http://www.alcpu.com/CoreTemp/

Uppdate bios er noe du kan prøve på.

 

OCCT kan du belaste cpu,for og teste om den er stabil.

http://www.ocbase.com/perestroika_en/

Endret 15. desember 2008 av SNIPPSAT