Amd Barton kommer med 400 mhz

[Boralis]

Leste på tweak.dk at an med 400 mhz kjerne.

[CFD]

The first is the fact that a 32-bit Athlon chip at Comdex _was_verified_ to be

running at 400MHz on a nForce2 board.

 

The next is that several people have been reporting that the "Barton" (32-bit

Athlon w/512KB L2) will run with a 400MHz FSB. Given the former, this makes sense.

 

To date, most Athlons run with a 266MHz FSB (133MHz DDR) and several XP2400+ and

faster products offer a 333MHz FSB (166MHz DDR) model. Newer chipsets from ViA

and nVidia offer a 400MHz FSB (200MHz DDR) for both CPU and memory. "Supported"

might be another issue though.

 

Intel P4 processors uses a 400 or 533MHz FSB (100-133MHz "Quad Pumped") FSB

based on Rambus technology. It has been shown, however, there is not a 1:1

ratio between the "effective speed" of P4 and Athlon FSBs, and Intel's "Quad

Pumped" approach is not as efficient as AMD's "DDR" approach per MHz (a result

of using Rambus' technology, which is faster, but also has greater latency times

in transfer).

 

Vell siden ikke alle Nforce2 HKèr pr.idag ikke klarer 200fsb så vil det nok ta litt tid tror nok jeg. Jeg stoler på AMDzone og hvis de sier det med stor sikkerhet så er sjangsen for det MEGET stor.